[Tue Jun 12 09:45:23 2012] Detection parameters:
  Position = (218.0, 260.3) = 14 30 32.22 -62 41 43.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 417.7 +/- 28.3
  Background counts = 97.1
  Rate = 0.02 +/- 0.001

[Tue Jun 12 09:45:23 2012] Off-axis axis estimate = 6.46'
[Tue Jun 12 09:47:21 2012] Using EEF radius (= 9.66 ")to estimate initial spatial extent for simple fitting
[Tue Jun 12 09:47:21 2012] Initial guess for spatial extent in simple fitting = 9.66"
[Tue Jun 12 09:47:21 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.014
[Tue Jun 12 09:47:21 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 9.66"
[Tue Jun 12 10:14:26 2012] fullrun_pn_xmm0551120401_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jun 12 10:14:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551120401_pi300-10000_cl_pass0_src1.csv
[Tue Jun 12 10:14:26 2012] fullrun_pn_xmm0551120401_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jun 12 10:14:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551120401_pi300-10000_cl_pass0_src1.csv
[Tue Jun 12 10:14:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551120401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551120401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 10:14:26 2012] fullrun_pn_xmm0551120401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jun 12 10:14:26 2012] fullrun_pn_xmm0551120401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jun 12 10:14:26 2012] Fit fullrun_pn_xmm0551120401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jun 12 10:41:59 2012] Spatial fit model total counts = 908.853000, observed total counts = 908.000000
[Tue Jun 12 10:41:59 2012] Offset between fit and detection position for source 1 = 0.105774 pixels
[Tue Jun 12 10:41:59 2012] 886.853000 total counts/ 689.534000 bgd. counts: snr = 7.514344
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.105774 pixels
  Position = (217.9, 260.4) = 14 30 32.25 -62 41 44.5
  Extent = 4.4 (4.0-4.9)", rotation angle = 0
  Source counts = 197.3 +/- 29.8
  Background counts = 689.5
  Rate = 0.01 +/- 0.001
[Tue Jun 12 10:41:59 2012] Vigneting correction estimate = 1.000000
[Tue Jun 12 10:41:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 12 10:41:59 2012] Assessing source extent using major axis lower bound
[Tue Jun 12 10:41:59 2012] Source does appear to be extended
[Tue Jun 12 10:41:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 12 10:42:07 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 12 10:42:07 2012] Initial guess for spatial extent in simple fitting = 4.40"
[Tue Jun 12 10:42:07 2012] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.984
[Tue Jun 12 10:42:07 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 4.40"
[Tue Jun 12 10:58:38 2012] fullrun_pn_xmm0551120401_pi300-10000_cl_pass1_src1.ximg exists
[Tue Jun 12 10:58:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551120401_pi300-10000_cl_pass1_src1.csv
[Tue Jun 12 10:58:38 2012] fullrun_pn_xmm0551120401_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Jun 12 10:58:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551120401_pi300-10000_cl_pass1_src1.csv
[Tue Jun 12 10:58:38 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551120401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551120401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 10:58:38 2012] fullrun_pn_xmm0551120401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Jun 12 10:58:38 2012] fullrun_pn_xmm0551120401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jun 12 10:58:38 2012] Fit fullrun_pn_xmm0551120401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Jun 12 11:12:05 2012] Spatial fit model total counts = 798.768000, observed total counts = 796.000000
[Tue Jun 12 11:12:05 2012] Offset between fit and detection position for source 1 = 0.011302 pixels
[Tue Jun 12 11:12:05 2012] 785.754000 total counts/ 594.203000 bgd. counts: snr = 7.858090
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.011302 pixels
  Position = (217.9, 260.4) = 14 30 32.25 -62 41 44.5
  Extent = 4.3 (3.9-4.9)", rotation angle = 0
  Source counts = 191.6 +/- 28.0
  Background counts = 594.2
  Rate = 0.009 +/- 0.001
[Tue Jun 12 11:12:05 2012] Vigneting correction estimate = 1.000000
[Tue Jun 12 11:12:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 12 11:12:05 2012] Assessing source extent using major axis lower bound
[Tue Jun 12 11:12:05 2012] Source does appear to be extended
[Tue Jun 12 11:12:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 12 11:12:12 2012] XMMSAS src. selection expression = ellipse(18909.449600, 22606.284400, 255.301207, 255.301207, 0.000000, X, Y)
[Tue Jun 12 11:12:12 2012] Writing source region out to fullrun_pn_xmm0551120401_pi300-10000_pass1_cl_src1_src.reg
[Tue Jun 12 11:12:12 2012] Extracting stamp from image fullrun_pn_xmm0551120401_pi300-10000_cl_sm2.00.img.gz, (203, 246) - (233, 275)
[Tue Jun 12 11:12:12 2012] XMMSAS bgd. selection expression = annulus(18909.449600, 22606.284400, 425.502012, 851.004024, X, Y)
[Tue Jun 12 11:12:12 2012] Writing fullrun_pn_xmm0551120401_pi300-10000_pass1_cl_src1.gif
[Tue Jun 12 11:12:26 2012] Mean detx,y = (6260.06, 4032.96) 
[Tue Jun 12 11:12:28 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 12 11:12:41 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 12 11:12:41 2012] Setting source spectrum file to fullrun_pn_xmm0551120401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jun 12 11:12:41 2012] Setting bgd. spectrum file to fullrun_pn_xmm0551120401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Jun 12 16:32:47 2012] Updating aperture counts using extracted products
[Tue Jun 12 16:32:47 2012] Error reading totcts from fullrun_pn_xmm0551120401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jun 12 16:32:48 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 12 16:32:48 2012] Using photon index=1.80, rate=0.00928, arf fullrun_pn_xmm0551120401_pi300-10000_pass1_cl_src1.arf
[Tue Jun 12 16:32:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 12 16:32:48 2012] Updating source flux to 4.2e-14
[Tue Jun 12 16:34:18 2012] Reading fit data from xmm0551120401/analysis//spectral/fullrun_pn_xmm0551120401_pi300-10000_pass1_cl_src1_pl.csv
[Tue Jun 12 16:34:18 2012] Spectral fit parameter nH value = 1.21977e+22
[Tue Jun 12 16:34:18 2012] Spectral fit parameter PhoIndex value = 9.9
[Tue Jun 12 16:34:18 2012] Failed to get F(0.3-8.0) from xmm0551120401/analysis//spectral/fullrun_pn_xmm0551120401_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Jun 12 16:34:18 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 12 16:34:18 2012] Using Nh = 1.2e+22, photon index=9.90, rate=0.00928, arf fullrun_pn_xmm0551120401_pi300-10000_pass1_cl_src1.arf
[Tue Jun 12 16:34:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 12 16:34:18 2012] Updating source flux to 2.4e-14