[Tue Jun 12 09:45:45 2012] Detection parameters:
  Position = (304.1, 275.8) = 14 29 37.75 -62 40 39.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 27067.2 +/- 193.3
  Background counts = 23.1
  Rate = 1 +/- 0.007

[Tue Jun 12 09:45:45 2012] Off-axis axis estimate = 1.69'
[Tue Jun 12 10:26:44 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Tue Jun 12 10:26:44 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Tue Jun 12 10:26:44 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.847
[Tue Jun 12 10:26:44 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Tue Jun 12 10:41:55 2012] fullrun_mos2_xmm0551120401_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jun 12 10:41:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551120401_pi300-10000_cl_pass0_src1.csv
[Tue Jun 12 10:41:55 2012] fullrun_mos2_xmm0551120401_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jun 12 10:41:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551120401_pi300-10000_cl_pass0_src1.csv
[Tue Jun 12 10:41:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551120401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551120401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 10:41:55 2012] fullrun_mos2_xmm0551120401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jun 12 10:41:55 2012] fullrun_mos2_xmm0551120401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jun 12 10:41:55 2012] Fit fullrun_mos2_xmm0551120401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jun 12 10:42:02 2012] Spatial fit model total counts = 24629.000000, observed total counts = 24199.000000
[Tue Jun 12 10:42:02 2012] Offset between fit and detection position for source 1 = 0.159714 pixels
[Tue Jun 12 10:42:02 2012] 24547.840000 total counts/ 5694.540000 bgd. counts: snr = 249.837747
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.159714 pixels
  Position = (304.1, 275.6) = 14 29 37.74 -62 40 38.9
  Extent = 5.3 (5.3-5.4)", rotation angle = 0
  Source counts = 18853.3 +/- 156.7
  Background counts = 5694.5
  Rate = 0.7 +/- 0.005
[Tue Jun 12 10:42:02 2012] Vigneting correction estimate = 1.000000
[Tue Jun 12 10:42:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 12 10:42:02 2012] Assessing source extent using major axis lower bound
[Tue Jun 12 10:42:02 2012] Source does appear to be extended
[Tue Jun 12 10:42:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 12 11:08:00 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 12 11:08:00 2012] Initial guess for spatial extent in simple fitting = 5.34"
[Tue Jun 12 11:08:00 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.005
[Tue Jun 12 11:08:00 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.34"
[Tue Jun 12 11:12:03 2012] fullrun_mos2_xmm0551120401_pi300-10000_cl_pass1_src1.ximg exists
[Tue Jun 12 11:12:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551120401_pi300-10000_cl_pass1_src1.csv
[Tue Jun 12 11:12:03 2012] fullrun_mos2_xmm0551120401_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Jun 12 11:12:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551120401_pi300-10000_cl_pass1_src1.csv
[Tue Jun 12 11:12:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551120401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551120401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 11:12:03 2012] fullrun_mos2_xmm0551120401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Jun 12 11:12:03 2012] fullrun_mos2_xmm0551120401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jun 12 11:12:03 2012] Fit fullrun_mos2_xmm0551120401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Jun 12 11:12:07 2012] Spatial fit model total counts = 24617.600000, observed total counts = 24190.000000
[Tue Jun 12 11:12:07 2012] Offset between fit and detection position for source 1 = 0.011873 pixels
[Tue Jun 12 11:12:07 2012] 24638.760000 total counts/ 5693.460000 bgd. counts: snr = 251.080711
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.011873 pixels
  Position = (304.1, 275.6) = 14 29 37.74 -62 40 38.9
  Extent = 5.4 (5.3-5.4)", rotation angle = 0
  Source counts = 18945.3 +/- 157.0
  Background counts = 5693.5
  Rate = 0.7 +/- 0.006
[Tue Jun 12 11:12:07 2012] Vigneting correction estimate = 1.000000
[Tue Jun 12 11:12:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 12 11:12:07 2012] Assessing source extent using major axis lower bound
[Tue Jun 12 11:12:07 2012] Source does appear to be extended
[Tue Jun 12 11:12:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 12 16:25:13 2012] Counts = 18945.300000, rescaling region sizes by 3.000000
[Tue Jun 12 16:25:13 2012] XMMSAS src. selection expression = ellipse(26411.194480, 23928.593200, 966.565828, 966.565828, 0.000000, X, Y)
[Tue Jun 12 16:25:13 2012] Writing source region out to fullrun_mos2_xmm0551120401_pi300-10000_pass1_cl_src1_src.reg
[Tue Jun 12 16:25:13 2012] Extracting stamp from image fullrun_mos2_xmm0551120401_pi300-10000_cl_sm2.00.img.gz, (249, 220) - (360, 331)
[Tue Jun 12 16:25:13 2012] XMMSAS bgd. selection expression = annulus(26411.194480, 23928.593200, 4832.829139, 9665.658278, X, Y)
[Tue Jun 12 16:25:13 2012] Writing fullrun_mos2_xmm0551120401_pi300-10000_pass1_cl_src1.gif
[Tue Jun 12 16:25:18 2012] Mean detx,y = (173.37, 140.42) 
[Tue Jun 12 16:25:19 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 12 16:27:55 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 12 16:27:55 2012] Setting source spectrum file to fullrun_mos2_xmm0551120401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jun 12 16:27:55 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0551120401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Jun 12 16:32:48 2012] Updating aperture counts using extracted products
[Tue Jun 12 16:32:48 2012] Error reading totcts from fullrun_mos2_xmm0551120401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jun 12 16:32:48 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 12 16:32:48 2012] Using photon index=1.80, rate=0.665, arf fullrun_mos2_xmm0551120401_pi300-10000_pass1_cl_src1.arf
[Tue Jun 12 16:32:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 12 16:32:48 2012] Updating source flux to 6.9e-12
[Tue Jun 12 16:33:13 2012] Reading fit data from xmm0551120401/analysis//spectral/fullrun_mos2_xmm0551120401_pi300-10000_pass1_cl_src1_pl.csv
[Tue Jun 12 16:33:13 2012] Spectral fit parameter nH value = 5.18887e+21
[Tue Jun 12 16:33:13 2012] Spectral fit parameter PhoIndex value = 6.16375
[Tue Jun 12 16:33:13 2012] Failed to get F(0.3-8.0) from xmm0551120401/analysis//spectral/fullrun_mos2_xmm0551120401_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Jun 12 16:33:13 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 12 16:33:13 2012] Using Nh = 5.2e+21, photon index=6.16, rate=0.665, arf fullrun_mos2_xmm0551120401_pi300-10000_pass1_cl_src1.arf
[Tue Jun 12 16:33:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 12 16:33:13 2012] Updating source flux to 4.1e-12