[Thu Jun  6 12:08:36 2013] Detection parameters:
  Position = (291.1, 363.1) = 14 29 45.14 -62 34 11.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 88.8 +/- 13.9
  Background counts = 33.3
  Rate = 0.005 +/- 0.0008

[Thu Jun  6 12:08:36 2013] Off-axis axis estimate = 4.72'
[Thu Jun  6 12:11:00 2013] Using EEF radius (= 8.79 ")to estimate initial spatial extent for simple fitting
[Thu Jun  6 12:11:00 2013] Initial guess for spatial extent in simple fitting = 8.79"
[Thu Jun  6 12:11:00 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.984
[Thu Jun  6 12:11:00 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 8.79"
[Thu Jun  6 12:46:07 2013] fullrun_pn_xmm0551120201_pi300-10000_cl_pass0_src8.ximg exists
[Thu Jun  6 12:46:07 2013] fullrun_pn_xmm0551120201_pi300-10000_cl_pass0_src8_1.ximg exists
[Thu Jun  6 12:46:07 2013] Fit fullrun_pn_xmm0551120201_pi300-10000_cl_pass0_src8 appears to have run properly
[Thu Jun  6 12:46:07 2013] fullrun_pn_xmm0551120201_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Thu Jun  6 12:46:07 2013] fullrun_pn_xmm0551120201_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Thu Jun  6 12:46:07 2013] Fit fullrun_pn_xmm0551120201_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Thu Jun  6 13:17:20 2013] Spatial fit model total counts = 428.426000, observed total counts = 403.000000
[Thu Jun  6 13:17:20 2013] Offset between fit and detection position for source 9 = 0.953964 pixels
[Thu Jun  6 13:17:20 2013] 432.048200 total counts/ 336.509000 bgd. counts: snr = 5.208147
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.953964 pixels
  Position = (290.5, 363.9) = 14 29 45.51 -62 34 8.7
  Extent = 14.4 (9.4-17.6)" x 4.2 (3.0-5.9)", rotation angle = 70 (61-78) degrees
  Source counts = 95.5 +/- 20.8
  Background counts = 336.5
  Rate = 0.003 +/- 0.0007
[Thu Jun  6 13:17:20 2013] Vigneting correction estimate = 1.000000
[Thu Jun  6 13:17:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  6 13:17:20 2013] Assessing source extent using major axis lower bound
[Thu Jun  6 13:17:20 2013] Source does appear to be extended
[Thu Jun  6 13:17:20 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.58
[Thu Jun  6 13:17:20 2013] Source is asymmetric
[Thu Jun  6 13:17:29 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun  6 13:17:29 2013] Initial guess for spatial extent in simple fitting = 9.31"
[Thu Jun  6 13:17:29 2013] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.077
[Thu Jun  6 13:17:29 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 9.31"
[Thu Jun  6 13:39:22 2013] fullrun_pn_xmm0551120201_pi300-10000_cl_pass1_src8.ximg exists
[Thu Jun  6 13:39:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551120201_pi300-10000_cl_pass1_src8.csv
[Thu Jun  6 13:39:22 2013] fullrun_pn_xmm0551120201_pi300-10000_cl_pass1_src8_1.ximg exists
[Thu Jun  6 13:39:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551120201_pi300-10000_cl_pass1_src8.csv
[Thu Jun  6 13:39:22 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551120201_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551120201_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 13:39:22 2013] fullrun_pn_xmm0551120201_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Thu Jun  6 13:39:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551120201_pi300-10000_cl_pass1_tfrozen_src8.csv
[Thu Jun  6 13:39:22 2013] fullrun_pn_xmm0551120201_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Thu Jun  6 13:39:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551120201_pi300-10000_cl_pass1_tfrozen_src8.csv
[Thu Jun  6 13:39:22 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551120201_pi300-10000_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551120201_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 14:12:25 2013] Warning, spatial fit 8 centroid is now closest to src. 12
[Thu Jun  6 14:12:25 2013] Vigneting correction estimate = 1.000000
[Thu Jun  6 14:12:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  6 14:12:25 2013] Assessing source extent using major axis lower bound
[Thu Jun  6 14:12:25 2013] Source does appear to be extended
[Thu Jun  6 14:12:25 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.58
[Thu Jun  6 14:12:25 2013] Source is asymmetric
[Thu Jun  6 14:12:34 2013] XMMSAS src. selection expression = ellipse(25227.163400, 31609.624060, 863.196025, 253.474207, 70.342384, X, Y)
[Thu Jun  6 14:12:34 2013] Writing source region out to fullrun_pn_xmm0551120201_pi300-10000_pass1_cl_src9_src.reg
[Thu Jun  6 14:12:34 2013] Extracting stamp from image fullrun_pn_xmm0551120201_pi300-10000_cl_sm2.00.img.gz, (241, 314) - (340, 413)
[Thu Jun  6 14:12:34 2013] XMMSAS bgd. selection expression = annulus(25227.163400, 31609.624060, 1438.660041, 2877.320083, X, Y) && !ellipse(28726.925232, 30218.560516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23162.764404, 30139.666321, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun  6 14:12:34 2013] Writing fullrun_pn_xmm0551120201_pi300-10000_pass1_cl_src9.gif
[Thu Jun  6 14:21:29 2013] Mean detx,y = (-4472.94, 6114.18) 
[Thu Jun  6 14:21:32 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun  6 14:21:53 2013] Binned source spectrum to 10 counts/bin
[Thu Jun  6 14:21:53 2013] Setting source spectrum file to fullrun_pn_xmm0551120201_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Thu Jun  6 14:21:53 2013] Setting bgd. spectrum file to fullrun_pn_xmm0551120201_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Thu Jun  6 14:36:37 2013] Not generating rmf since there are only 95 counts
[Thu Jun  6 14:36:37 2013] rmf not generated due to insufficient counts
[Thu Jun  6 15:00:33 2013] Updating aperture counts using extracted products
[Thu Jun  6 15:00:33 2013] Total counts from fullrun_pn_xmm0551120201_pi300-10000_pass1_cl_src9_src_b10.pi.gz = 175.00
[Thu Jun  6 15:00:33 2013] Total counts from fullrun_pn_xmm0551120201_pi300-10000_pass1_cl_src9_bgd.pi.gz = 1817.00
[Thu Jun  6 15:00:33 2013] Got source and background scale factors 608213.000000, 10124643.000000
[Thu Jun  6 15:00:33 2013] User source parameters:
  Position = (290.5, 363.9) = 14 29 45.51 -62 34 8.7
  Extent = 14.4 (9.4-17.6)" x 4.2 (3.0-5.9)", rotation angle = 70 (61-78) degrees
  Source aperture counts = 65.8 +/- 14.3
  Background aperture counts = 109.2
  Rate = 0.002 +/- 0.0005

[Thu Jun  6 15:00:35 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun  6 15:00:35 2013] Using photon index=1.80, rate=0.00333, arf fullrun_pn_xmm0551120201_pi300-10000_pass1_cl_src9.arf
[Thu Jun  6 15:00:35 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun  6 15:00:35 2013] Updating source flux to 3.7e-14
[Thu Jun  6 15:00:42 2013] Source 9 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Jun  6 15:00:45 2013] xmm0551120201/analysis//spectral/fullrun_pn_xmm0551120201_pi300-10000_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete