[Thu Jun  6 12:09:13 2013] Detection parameters:
  Position = (298.6, 391.7) = 14 29 40.45 -62 32 6.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 52.7 +/- 10.0
  Background counts = 11.8
  Rate = 0.003 +/- 0.0006

[Thu Jun  6 12:09:13 2013] Off-axis axis estimate = 6.76'
[Thu Jun  6 13:02:58 2013] Using EEF radius (= 9.81 ")to estimate initial spatial extent for simple fitting
[Thu Jun  6 13:02:58 2013] Initial guess for spatial extent in simple fitting = 9.81"
[Thu Jun  6 13:02:58 2013] source mask rpix=2.3, npix_max = 30, mask sum = 25, frac = 0.823
[Thu Jun  6 13:02:58 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 9.81"
[Thu Jun  6 13:17:15 2013] fullrun_mos2_xmm0551120201_pi300-10000_cl_pass0_src8.ximg exists
[Thu Jun  6 13:17:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551120201_pi300-10000_cl_pass0_src8.csv
[Thu Jun  6 13:17:15 2013] fullrun_mos2_xmm0551120201_pi300-10000_cl_pass0_src8_1.ximg exists
[Thu Jun  6 13:17:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551120201_pi300-10000_cl_pass0_src8.csv
[Thu Jun  6 13:17:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551120201_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551120201_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 13:17:15 2013] fullrun_mos2_xmm0551120201_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Thu Jun  6 13:17:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551120201_pi300-10000_cl_pass0_tfrozen_src8.csv
[Thu Jun  6 13:17:15 2013] fullrun_mos2_xmm0551120201_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Thu Jun  6 13:17:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551120201_pi300-10000_cl_pass0_tfrozen_src8.csv
[Thu Jun  6 13:17:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551120201_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551120201_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 13:17:23 2013] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 10.229587 pixels away
[Thu Jun  6 13:17:23 2013] Vigneting correction estimate = 1.000000
[Thu Jun  6 13:17:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  6 13:17:23 2013] Assessing source extent using major
[Thu Jun  6 13:17:23 2013] Source does appear to be extended
[Thu Jun  6 13:17:23 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  6 13:57:10 2013] Using EEF radius (= 9.81 ")to estimate initial spatial extent for simple fitting
[Thu Jun  6 13:57:10 2013] Initial guess for spatial extent in simple fitting = 9.81"
[Thu Jun  6 13:57:10 2013] source mask rpix=2.3, npix_max = 30, mask sum = 25, frac = 0.823
[Thu Jun  6 13:57:10 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 9.81"
[Thu Jun  6 14:12:21 2013] fullrun_mos2_xmm0551120201_pi300-10000_cl_pass1_src8.ximg exists
[Thu Jun  6 14:12:21 2013] fullrun_mos2_xmm0551120201_pi300-10000_cl_pass1_src8_1.ximg exists
[Thu Jun  6 14:12:21 2013] Fit fullrun_mos2_xmm0551120201_pi300-10000_cl_pass1_src8 appears to have run properly
[Thu Jun  6 14:12:21 2013] fullrun_mos2_xmm0551120201_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Thu Jun  6 14:12:21 2013] fullrun_mos2_xmm0551120201_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Thu Jun  6 14:12:21 2013] Fit fullrun_mos2_xmm0551120201_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Thu Jun  6 14:12:28 2013] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 12.157890 pixels away
[Thu Jun  6 14:12:28 2013] Vigneting correction estimate = 1.000000
[Thu Jun  6 14:12:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  6 14:12:28 2013] Assessing source extent using major
[Thu Jun  6 14:12:28 2013] Source does appear to be extended
[Thu Jun  6 14:12:28 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  6 14:53:20 2013] XMMSAS src. selection expression = ellipse(25925.585236, 34029.759491, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun  6 14:53:20 2013] Writing source region out to fullrun_mos2_xmm0551120201_pi300-10000_pass1_cl_src3_src.reg
[Thu Jun  6 14:53:20 2013] Extracting stamp from image fullrun_mos2_xmm0551120201_pi300-10000_cl_sm2.00.img.gz, (261, 354) - (336, 429)
[Thu Jun  6 14:53:20 2013] XMMSAS bgd. selection expression = annulus(25925.585236, 34029.759491, 1087.500000, 2175.000000, X, Y)
[Thu Jun  6 14:53:20 2013] Writing fullrun_mos2_xmm0551120201_pi300-10000_pass1_cl_src3.gif
[Thu Jun  6 14:55:05 2013] Mean detx,y = (6649.22, -7614.58) 
[Thu Jun  6 14:55:06 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun  6 14:55:19 2013] Binned source spectrum to 10 counts/bin
[Thu Jun  6 14:55:19 2013] Setting source spectrum file to fullrun_mos2_xmm0551120201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Jun  6 14:55:19 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0551120201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu Jun  6 14:59:44 2013] Not generating rmf since there are only 52 counts
[Thu Jun  6 14:59:44 2013] rmf not generated due to insufficient counts
[Thu Jun  6 15:00:37 2013] Updating aperture counts using extracted products
[Thu Jun  6 15:00:37 2013] Total counts from fullrun_mos2_xmm0551120201_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 132.00
[Thu Jun  6 15:00:37 2013] Total counts from fullrun_mos2_xmm0551120201_pi300-10000_pass1_cl_src3_bgd.pi.gz = 542.00
[Thu Jun  6 15:00:37 2013] Got source and background scale factors 1336012.000000, 8533698.000000
[Thu Jun  6 15:00:37 2013] User source parameters:
  Position = (298.6, 391.7) = 14 29 40.45 -62 32 6.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 47.1 +/- 12.5
  Background aperture counts = 84.9
  Rate = 0.002 +/- 0.0004

[Thu Jun  6 15:00:37 2013] Updating counts from extracted products
[Thu Jun  6 15:00:37 2013] Set source signif. to 47.15/9.21 = 5.12
[Thu Jun  6 15:00:38 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun  6 15:00:38 2013] Using photon index=1.80, rate=0.00154, arf fullrun_mos2_xmm0551120201_pi300-10000_pass1_cl_src3.arf
[Thu Jun  6 15:00:38 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun  6 15:00:38 2013] Updating source flux to 4.6e-14
[Thu Jun  6 15:00:41 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun  6 15:00:42 2013] xmm0551120201/analysis//spectral/fullrun_mos2_xmm0551120201_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete