[Thu Jun  6 12:09:13 2013] Detection parameters:
  Position = (186.2, 131.1) = 14 30 51.87 -62 51 1.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 54.9 +/- 10.5
  Background counts = 10.7
  Rate = 0.002 +/- 0.0003

[Thu Jun  6 12:09:13 2013] Off-axis axis estimate = 14.61'
[Thu Jun  6 13:02:58 2013] Using EEF radius (= 13.73 ")to estimate initial spatial extent for simple fitting
[Thu Jun  6 13:02:58 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun  6 13:02:58 2013] Initial guess for spatial extent in simple fitting = 13.73"
[Thu Jun  6 13:02:58 2013] source mask rpix=3.2, npix_max = 53, mask sum = 53, frac = 0.991
[Thu Jun  6 13:02:58 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 13.73"
[Thu Jun  6 13:17:15 2013] fullrun_mos2_xmm0551120201_pi300-10000_cl_pass0_src10.ximg exists
[Thu Jun  6 13:17:15 2013] fullrun_mos2_xmm0551120201_pi300-10000_cl_pass0_src10_1.ximg exists
[Thu Jun  6 13:17:15 2013] Fit fullrun_mos2_xmm0551120201_pi300-10000_cl_pass0_src10 appears to have run properly
[Thu Jun  6 13:17:15 2013] fullrun_mos2_xmm0551120201_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Thu Jun  6 13:17:15 2013] fullrun_mos2_xmm0551120201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Thu Jun  6 13:17:15 2013] Fit fullrun_mos2_xmm0551120201_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Thu Jun  6 13:17:23 2013] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 17.040645 pixels away
[Thu Jun  6 13:17:23 2013] Vigneting correction estimate = 1.000000
[Thu Jun  6 13:17:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  6 13:17:23 2013] Assessing source extent using major
[Thu Jun  6 13:17:23 2013] Source does appear to be extended
[Thu Jun  6 13:17:23 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  6 13:57:10 2013] Using EEF radius (= 13.73 ")to estimate initial spatial extent for simple fitting
[Thu Jun  6 13:57:10 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun  6 13:57:10 2013] Initial guess for spatial extent in simple fitting = 13.73"
[Thu Jun  6 13:57:10 2013] source mask rpix=3.2, npix_max = 53, mask sum = 53, frac = 0.991
[Thu Jun  6 13:57:10 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 13.73"
[Thu Jun  6 14:12:21 2013] fullrun_mos2_xmm0551120201_pi300-10000_cl_pass1_src10.ximg exists
[Thu Jun  6 14:12:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551120201_pi300-10000_cl_pass1_src10.csv
[Thu Jun  6 14:12:21 2013] fullrun_mos2_xmm0551120201_pi300-10000_cl_pass1_src10_1.ximg exists
[Thu Jun  6 14:12:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551120201_pi300-10000_cl_pass1_src10.csv
[Thu Jun  6 14:12:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551120201_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551120201_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 14:12:21 2013] fullrun_mos2_xmm0551120201_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Thu Jun  6 14:12:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551120201_pi300-10000_cl_pass1_tfrozen_src10.csv
[Thu Jun  6 14:12:21 2013] fullrun_mos2_xmm0551120201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Thu Jun  6 14:12:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551120201_pi300-10000_cl_pass1_tfrozen_src10.csv
[Thu Jun  6 14:12:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551120201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551120201_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 14:12:28 2013] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 16.120956 pixels away
[Thu Jun  6 14:12:28 2013] Vigneting correction estimate = 1.000000
[Thu Jun  6 14:12:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  6 14:12:28 2013] Assessing source extent using major
[Thu Jun  6 14:12:28 2013] Source does appear to be extended
[Thu Jun  6 14:12:28 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  6 14:53:20 2013] XMMSAS src. selection expression = ellipse(16148.627029, 11360.452942, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun  6 14:53:20 2013] Writing source region out to fullrun_mos2_xmm0551120201_pi300-10000_pass1_cl_src11_src.reg
[Thu Jun  6 14:53:20 2013] Extracting stamp from image fullrun_mos2_xmm0551120201_pi300-10000_cl_sm2.00.img.gz, (149, 94) - (224, 169)
[Thu Jun  6 14:53:20 2013] XMMSAS bgd. selection expression = annulus(16148.627029, 11360.452942, 1087.500000, 2175.000000, X, Y)
[Thu Jun  6 14:53:20 2013] Writing fullrun_mos2_xmm0551120201_pi300-10000_pass1_cl_src11.gif
[Thu Jun  6 14:55:21 2013] Mean detx,y = (-15850.73, 2520.94) 
[Thu Jun  6 14:55:22 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun  6 14:55:40 2013] Binned source spectrum to 10 counts/bin
[Thu Jun  6 14:55:40 2013] Setting source spectrum file to fullrun_mos2_xmm0551120201_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Thu Jun  6 14:55:40 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0551120201_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Thu Jun  6 14:59:50 2013] Not generating rmf since there are only 54 counts
[Thu Jun  6 14:59:50 2013] rmf not generated due to insufficient counts
[Thu Jun  6 15:00:37 2013] Updating aperture counts using extracted products
[Thu Jun  6 15:00:37 2013] Total counts from fullrun_mos2_xmm0551120201_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 124.00
[Thu Jun  6 15:00:37 2013] Total counts from fullrun_mos2_xmm0551120201_pi300-10000_pass1_cl_src11_bgd.pi.gz = 439.00
[Thu Jun  6 15:00:38 2013] Got source and background scale factors 1251300.000000, 7387958.000000
[Thu Jun  6 15:00:38 2013] User source parameters:
  Position = (186.2, 131.1) = 14 30 51.87 -62 51 1.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 49.6 +/- 12.2
  Background aperture counts = 74.4
  Rate = 0.002 +/- 0.0004

[Thu Jun  6 15:00:38 2013] Updating counts from extracted products
[Thu Jun  6 15:00:38 2013] Set source signif. to 49.65/8.62 = 5.76
[Thu Jun  6 15:00:38 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun  6 15:00:38 2013] Using photon index=1.80, rate=0.00162, arf fullrun_mos2_xmm0551120201_pi300-10000_pass1_cl_src11.arf
[Thu Jun  6 15:00:38 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun  6 15:00:38 2013] Updating source flux to 7.4e-14
[Thu Jun  6 15:00:41 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun  6 15:00:42 2013] xmm0551120201/analysis//spectral/fullrun_mos2_xmm0551120201_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete