[Thu Jun  6 12:09:13 2013] Detection parameters:
  Position = (302.6, 274.0) = 14 29 37.87 -62 40 39.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 13586.3 +/- 138.4
  Background counts = 15.9
  Rate = 0.5 +/- 0.005

[Thu Jun  6 12:09:13 2013] Off-axis axis estimate = 1.80'
[Thu Jun  6 13:02:58 2013] Using EEF radius (= 7.33 ")to estimate initial spatial extent for simple fitting
[Thu Jun  6 13:02:58 2013] Initial guess for spatial extent in simple fitting = 7.33"
[Thu Jun  6 13:02:58 2013] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.048
[Thu Jun  6 13:02:58 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.33"
[Thu Jun  6 13:17:15 2013] fullrun_mos2_xmm0551120201_pi300-10000_cl_pass0_src1.ximg exists
[Thu Jun  6 13:17:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551120201_pi300-10000_cl_pass0_src1.csv
[Thu Jun  6 13:17:15 2013] fullrun_mos2_xmm0551120201_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Jun  6 13:17:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551120201_pi300-10000_cl_pass0_src1.csv
[Thu Jun  6 13:17:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551120201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551120201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 13:17:15 2013] fullrun_mos2_xmm0551120201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Jun  6 13:17:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551120201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu Jun  6 13:17:15 2013] fullrun_mos2_xmm0551120201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jun  6 13:17:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551120201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu Jun  6 13:17:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551120201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551120201_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 13:17:23 2013] Source 1 is offset by -6.089014 and -7.747034 pixels which is larger than
2 X fitted extent = 0.842276 x 0.842276, not incorporating fit results
[Thu Jun  6 13:17:23 2013] Source 1 is offset by 4.935607 and -0.667770 pixels which is larger than
2 X fitted extent = 3.079802 x 5.035265, not incorporating fit results
[Thu Jun  6 13:17:23 2013] Vigneting correction estimate = 1.000000
[Thu Jun  6 13:17:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  6 13:17:23 2013] Assessing source extent using major
[Thu Jun  6 13:17:23 2013] Source does appear to be extended
[Thu Jun  6 13:17:23 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  6 13:57:10 2013] Using EEF radius (= 7.33 ")to estimate initial spatial extent for simple fitting
[Thu Jun  6 13:57:10 2013] Initial guess for spatial extent in simple fitting = 7.33"
[Thu Jun  6 13:57:10 2013] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.048
[Thu Jun  6 13:57:10 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 7.33"
[Thu Jun  6 14:12:21 2013] fullrun_mos2_xmm0551120201_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jun  6 14:12:21 2013] fullrun_mos2_xmm0551120201_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jun  6 14:12:21 2013] Fit fullrun_mos2_xmm0551120201_pi300-10000_cl_pass1_src1 appears to have run properly
[Thu Jun  6 14:12:21 2013] fullrun_mos2_xmm0551120201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jun  6 14:12:21 2013] fullrun_mos2_xmm0551120201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jun  6 14:12:21 2013] Fit fullrun_mos2_xmm0551120201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Jun  6 14:12:28 2013] Spatial fit model total counts = 12389.400000, observed total counts = 12037.000000
[Thu Jun  6 14:12:28 2013] Offset between fit and detection position for source 1 = 0.022358 pixels
[Thu Jun  6 14:12:28 2013] 12370.630000 total counts/ 3163.370000 bgd. counts: snr = 163.702538
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.022358 pixels
  Position = (302.7, 274.0) = 14 29 37.86 -62 40 39.7
  Extent = 5.4 (5.3-5.5)" x 4.8 (4.7-4.9)", rotation angle = 324 (317-331) degrees
  Source counts = 9207.3 +/- 111.2
  Background counts = 3163.4
  Rate = 0.3 +/- 0.004
[Thu Jun  6 14:12:28 2013] Vigneting correction estimate = 1.000000
[Thu Jun  6 14:12:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  6 14:12:28 2013] Assessing source extent using major axis lower bound
[Thu Jun  6 14:12:28 2013] Source does appear to be extended
[Thu Jun  6 14:12:28 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.08
[Thu Jun  6 14:53:19 2013] Counts = 9207.260000, rescaling region sizes by 2.000000
[Thu Jun  6 14:53:19 2013] XMMSAS src. selection expression = ellipse(26283.754400, 23789.522000, 647.811619, 573.588017, 323.802000, X, Y)
[Thu Jun  6 14:53:19 2013] Writing source region out to fullrun_mos2_xmm0551120201_pi300-10000_pass1_cl_src1_src.reg
[Thu Jun  6 14:53:19 2013] Extracting stamp from image fullrun_mos2_xmm0551120201_pi300-10000_cl_sm2.00.img.gz, (265, 237) - (340, 311)
[Thu Jun  6 14:53:19 2013] XMMSAS bgd. selection expression = annulus(26283.754400, 23789.522000, 2159.372062, 4318.744124, X, Y)
[Thu Jun  6 14:53:19 2013] Writing fullrun_mos2_xmm0551120201_pi300-10000_pass1_cl_src1.gif
[Thu Jun  6 14:53:23 2013] Mean detx,y = (26.98, 185.14) 
[Thu Jun  6 14:53:24 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun  6 14:53:47 2013] Binned source spectrum to 10 counts/bin
[Thu Jun  6 14:53:47 2013] Setting source spectrum file to fullrun_mos2_xmm0551120201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jun  6 14:53:47 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0551120201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Jun  6 15:00:36 2013] Updating aperture counts using extracted products
[Thu Jun  6 15:00:36 2013] Total counts from fullrun_mos2_xmm0551120201_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 11556.00
[Thu Jun  6 15:00:37 2013] Total counts from fullrun_mos2_xmm0551120201_pi300-10000_pass1_cl_src1_bgd.pi.gz = 0.00
[Thu Jun  6 15:00:37 2013] Got source and background scale factors 1140224.000000, 0.000000
[Thu Jun  6 15:00:37 2013] Background scale factor is not positive, halting re-assessment of this source
[Thu Jun  6 15:00:38 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun  6 15:00:38 2013] Using photon index=1.80, rate=0.301, arf fullrun_mos2_xmm0551120201_pi300-10000_pass1_cl_src1.arf
[Thu Jun  6 15:00:38 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun  6 15:00:38 2013] Updating source flux to 5.6e-12
[Thu Jun  6 15:00:41 2013] Flag b found in src. 1 procflags, skipping spectral fitting
[Thu Jun  6 15:00:42 2013] xmm0551120201/analysis//spectral/fullrun_mos2_xmm0551120201_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete