[Fri Jul 20 10:34:28 2012] Detection parameters:
  Position = (316.8, 334.1) = 18 56 0.71 1 17 8.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 920.0 +/- 55.4
  Background counts = 1126.4
  Rate = 0.02 +/- 0.001

[Fri Jul 20 10:34:35 2012] Off-axis axis estimate = 2.91'
[Fri Jul 20 10:46:11 2012] Using EEF radius (= 7.88 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 10:46:11 2012] Initial guess for spatial extent in simple fitting = 7.88"
[Fri Jul 20 10:46:11 2012] source mask rpix=1.8, npix_max = 21, mask sum = 19, frac = 0.889
[Fri Jul 20 10:46:11 2012] Giving source the simple spatial ID 52 for pass 0, mean size = 7.88"
[Fri Jul 20 22:33:18 2012] fullrun_pn_xmm0551060101_pi300-10000_cl_pass0_src52.ximg exists
[Fri Jul 20 22:33:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551060101_pi300-10000_cl_pass0_src52.csv
[Fri Jul 20 22:33:18 2012] fullrun_pn_xmm0551060101_pi300-10000_cl_pass0_src52_1.ximg exists
[Fri Jul 20 22:33:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551060101_pi300-10000_cl_pass0_src52.csv
[Fri Jul 20 22:33:18 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551060101_pi300-10000_cl_pass0_src52_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551060101_pi300-10000_cl_pass0_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 22:33:20 2012] fullrun_pn_xmm0551060101_pi300-10000_cl_pass0_tfrozen_src52.ximg exists
[Fri Jul 20 22:33:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551060101_pi300-10000_cl_pass0_tfrozen_src52.csv
[Fri Jul 20 22:33:20 2012] fullrun_pn_xmm0551060101_pi300-10000_cl_pass0_tfrozen_src52_1.ximg exists
[Fri Jul 20 22:33:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551060101_pi300-10000_cl_pass0_tfrozen_src52.csv
[Fri Jul 20 22:33:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551060101_pi300-10000_cl_pass0_tfrozen_src52_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551060101_pi300-10000_cl_pass0_tfrozen_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 10:07:53 2012] Warning, spatial fit 52 centroid is now closest to src. 65
[Sat Jul 21 10:07:53 2012] Vigneting correction estimate = 1.000000
[Sat Jul 21 10:07:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 21 10:07:53 2012] Assessing source extent using major
[Sat Jul 21 10:07:53 2012] Source does appear to be extended
[Sat Jul 21 10:07:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 21 10:07:53 2012] Source is confused with source 58
[Sat Jul 21 10:07:53 2012] Source is confused with source 71
[Sat Jul 21 10:09:46 2012] Using EEF radius (= 7.88 ")to estimate initial spatial extent for simple fitting
[Sat Jul 21 10:09:46 2012] Initial guess for spatial extent in simple fitting = 7.88"
[Sat Jul 21 10:09:46 2012] source mask rpix=1.8, npix_max = 21, mask sum = 19, frac = 0.889
[Sat Jul 21 10:09:46 2012] Giving source the simple spatial ID 49 for pass 1, mean size = 7.88"
[Sat Jul 21 18:26:25 2012] fullrun_pn_xmm0551060101_pi300-10000_cl_pass1_src49.ximg exists
[Sat Jul 21 18:26:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551060101_pi300-10000_cl_pass1_src49.csv
[Sat Jul 21 18:26:25 2012] fullrun_pn_xmm0551060101_pi300-10000_cl_pass1_src49_1.ximg exists
[Sat Jul 21 18:26:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551060101_pi300-10000_cl_pass1_src49.csv
[Sat Jul 21 18:26:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551060101_pi300-10000_cl_pass1_src49_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551060101_pi300-10000_cl_pass1_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 18:26:27 2012] fullrun_pn_xmm0551060101_pi300-10000_cl_pass1_tfrozen_src49.ximg exists
[Sat Jul 21 18:26:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551060101_pi300-10000_cl_pass1_tfrozen_src49.csv
[Sat Jul 21 18:26:28 2012] fullrun_pn_xmm0551060101_pi300-10000_cl_pass1_tfrozen_src49_1.ximg exists
[Sat Jul 21 18:26:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551060101_pi300-10000_cl_pass1_tfrozen_src49.csv
[Sat Jul 21 18:26:28 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551060101_pi300-10000_cl_pass1_tfrozen_src49_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551060101_pi300-10000_cl_pass1_tfrozen_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 10:12:51 2012] Spatial fit model total counts = 15830.300000, observed total counts = 12700.000000
[Sun Jul 22 10:12:51 2012] Poor agreement between spatial fit and data for source 63
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jul 22 10:12:51 2012] Vigneting correction estimate = 1.000000
[Sun Jul 22 10:12:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 22 10:12:51 2012] Assessing source extent using major
[Sun Jul 22 10:12:51 2012] Source does appear to be extended
[Sun Jul 22 10:12:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 22 10:15:11 2012] XMMSAS src. selection expression = ellipse(27509.984589, 29016.549103, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jul 22 10:15:11 2012] Writing source region out to fullrun_pn_xmm0551060101_pi300-10000_pass1_cl_src63_src.reg
[Sun Jul 22 10:15:11 2012] Extracting stamp from image fullrun_pn_xmm0551060101_pi300-10000_cl_sm2.00.img.gz, (279, 297) - (354, 372)
[Sun Jul 22 10:15:11 2012] XMMSAS bgd. selection expression = annulus(27509.984589, 29016.549103, 1087.500000, 2175.000000, X, Y) && !ellipse(28553.541199, 31909.033600, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30029.846344, 30903.202301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25594.657200, 32651.420400, 1478.864043, 1478.864043, 0.000000, X, Y) && !ellipse(26133.618000, 32531.766000, 2691.408077, 2691.408077, 0.000000, X, Y) && !ellipse(26455.442000, 32611.812000, 1460.664042, 1460.664042, 0.000000, X, Y) && !ellipse(29714.386383, 31447.047882, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27975.304000, 31945.423200, 1453.744042, 1453.744042, 0.000000, X, Y) && !ellipse(29438.842133, 31093.737823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26156.628800, 30817.728420, 524.113615, 524.113615, 0.000000, X, Y) && !ellipse(27116.178800, 30274.932200, 867.600025, 867.600025, 0.000000, X, Y) && !ellipse(31391.072000, 30244.632000, 2864.208082, 2864.208082, 0.000000, X, Y) && !ellipse(24751.082000, 30181.216200, 643.551219, 643.551219, 0.000000, X, Y) && !ellipse(31027.754000, 29698.658000, 2053.624059, 2053.624059, 0.000000, X, Y) && !ellipse(29842.348175, 29702.584778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29041.540894, 29601.502502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27154.677400, 30043.508000, 1251.536036, 1251.536036, 0.000000, X, Y) && !ellipse(29762.004333, 29344.365570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29072.389679, 29108.601624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29636.140015, 28919.011292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26722.398800, 28929.753000, 1243.640036, 760.647222, 168.049000, X, Y) && !ellipse(26546.992000, 28884.484000, 1243.640036, 1243.640036, 0.000000, X, Y) && !ellipse(28128.837402, 28993.147675, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27399.997345, 28157.591370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26476.984180, 28093.958400, 722.636021, 722.636021, 0.000000, X, Y) && !ellipse(25049.235600, 31770.402000, 1357.984039, 1357.984039, 0.000000, X, Y) && !ellipse(28939.242615, 31172.945312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28036.522034, 31118.065857, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24742.971466, 30752.213440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29116.617157, 30157.083313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31005.462880, 29922.814000, 1479.728043, 1479.728043, 0.000000, X, Y) && !ellipse(24722.068800, 29849.346000, 1316.584038, 1316.584038, 0.000000, X, Y) && !ellipse(28719.087585, 28071.398499, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29898.520630, 28130.547241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26092.281250, 26043.872101, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jul 22 10:15:11 2012] Writing fullrun_pn_xmm0551060101_pi300-10000_pass1_cl_src63.gif
[Sun Jul 22 13:30:19 2012] Mean detx,y = (-1727.62, 4881.88) 
[Sun Jul 22 13:30:28 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 22 13:31:08 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 22 13:31:09 2012] Setting source spectrum file to fullrun_pn_xmm0551060101_pi300-10000_pass1_cl_src63_src_b10.pi.gz
[Sun Jul 22 13:31:09 2012] Setting bgd. spectrum file to fullrun_pn_xmm0551060101_pi300-10000_pass1_cl_src63_bgd.pi.gz
[Sun Jul 22 17:20:25 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jul 22 17:20:25 2012] rmf not generated due to insufficient counts
[Mon Jul 23 11:54:38 2012] Updating aperture counts using extracted products
[Mon Jul 23 11:54:38 2012] Error reading totcts from fullrun_pn_xmm0551060101_pi300-10000_pass1_cl_src63_src_b10.pi.gz
[Mon Jul 23 11:54:46 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 23 11:54:46 2012] Using photon index=1.80, rate=0.0204, arf fullrun_pn_xmm0551060101_pi300-10000_pass1_cl_src63.arf
[Mon Jul 23 11:54:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 23 11:54:46 2012] Updating source flux to 7.5e-14
[Mon Jul 23 12:15:49 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting