[Fri Jul 20 10:34:27 2012] Detection parameters:
  Position = (234.7, 349.1) = 18 56 24.51 1 18 19.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 587.0 +/- 47.7
  Background counts = 746.6
  Rate = 0.01 +/- 0.001

[Fri Jul 20 10:34:35 2012] Off-axis axis estimate = 5.90'
[Fri Jul 20 10:46:11 2012] Using EEF radius (= 9.38 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 10:46:11 2012] Initial guess for spatial extent in simple fitting = 9.38"
[Fri Jul 20 10:46:11 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.063
[Fri Jul 20 10:46:11 2012] Giving source the simple spatial ID 43 for pass 0, mean size = 9.38"
[Fri Jul 20 22:33:17 2012] fullrun_pn_xmm0551060101_pi300-10000_cl_pass0_src43.ximg exists
[Fri Jul 20 22:33:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551060101_pi300-10000_cl_pass0_src43.csv
[Fri Jul 20 22:33:17 2012] fullrun_pn_xmm0551060101_pi300-10000_cl_pass0_src43_1.ximg exists
[Fri Jul 20 22:33:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551060101_pi300-10000_cl_pass0_src43.csv
[Fri Jul 20 22:33:17 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551060101_pi300-10000_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551060101_pi300-10000_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 22:33:20 2012] fullrun_pn_xmm0551060101_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Fri Jul 20 22:33:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551060101_pi300-10000_cl_pass0_tfrozen_src43.csv
[Fri Jul 20 22:33:20 2012] fullrun_pn_xmm0551060101_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Fri Jul 20 22:33:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551060101_pi300-10000_cl_pass0_tfrozen_src43.csv
[Fri Jul 20 22:33:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551060101_pi300-10000_cl_pass0_tfrozen_src43_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551060101_pi300-10000_cl_pass0_tfrozen_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 10:07:52 2012] Warning, spatial fit 43 centroid is now closest to src. 137
[Sat Jul 21 10:07:53 2012] Vigneting correction estimate = 1.000000
[Sat Jul 21 10:07:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 21 10:07:53 2012] Assessing source extent using major
[Sat Jul 21 10:07:53 2012] Source does appear to be extended
[Sat Jul 21 10:07:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 21 10:07:53 2012] Source is confused with source 49
[Sat Jul 21 10:09:46 2012] Using EEF radius (= 9.38 ")to estimate initial spatial extent for simple fitting
[Sat Jul 21 10:09:46 2012] Initial guess for spatial extent in simple fitting = 9.38"
[Sat Jul 21 10:09:46 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.063
[Sat Jul 21 10:09:46 2012] Giving source the simple spatial ID 41 for pass 1, mean size = 9.38"
[Sat Jul 21 18:26:25 2012] fullrun_pn_xmm0551060101_pi300-10000_cl_pass1_src41.ximg exists
[Sat Jul 21 18:26:25 2012] fullrun_pn_xmm0551060101_pi300-10000_cl_pass1_src41_1.ximg exists
[Sat Jul 21 18:26:25 2012] Fit fullrun_pn_xmm0551060101_pi300-10000_cl_pass1_src41 appears to have run properly
[Sat Jul 21 18:26:27 2012] fullrun_pn_xmm0551060101_pi300-10000_cl_pass1_tfrozen_src41.ximg exists
[Sat Jul 21 18:26:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551060101_pi300-10000_cl_pass1_tfrozen_src41.csv
[Sat Jul 21 18:26:27 2012] fullrun_pn_xmm0551060101_pi300-10000_cl_pass1_tfrozen_src41_1.ximg exists
[Sat Jul 21 18:26:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551060101_pi300-10000_cl_pass1_tfrozen_src41.csv
[Sat Jul 21 18:26:27 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551060101_pi300-10000_cl_pass1_tfrozen_src41_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551060101_pi300-10000_cl_pass1_tfrozen_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 10:12:51 2012] Warning, spatial fit 41 centroid is now closest to src. 3
[Sun Jul 22 10:12:51 2012] Vigneting correction estimate = 1.000000
[Sun Jul 22 10:12:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 22 10:12:51 2012] Assessing source extent using major
[Sun Jul 22 10:12:51 2012] Source does appear to be extended
[Sun Jul 22 10:12:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 22 10:15:09 2012] XMMSAS src. selection expression = ellipse(20372.952545, 30323.582855, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jul 22 10:15:09 2012] Writing source region out to fullrun_pn_xmm0551060101_pi300-10000_pass1_cl_src51_src.reg
[Sun Jul 22 10:15:09 2012] Extracting stamp from image fullrun_pn_xmm0551060101_pi300-10000_cl_sm2.00.img.gz, (197, 312) - (272, 387)
[Sun Jul 22 10:15:09 2012] XMMSAS bgd. selection expression = annulus(20372.952545, 30323.582855, 1087.500000, 2175.000000, X, Y) && !ellipse(21046.651627, 31396.820038, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22699.257355, 32756.399475, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22106.066727, 32164.715576, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20958.197998, 31873.132294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20541.501770, 31348.517090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20962.000000, 30289.125885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20262.260391, 29974.329681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21330.567184, 28411.998932, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20110.994080, 28496.298767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21205.020142, 28839.960449, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22699.647644, 28228.751465, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21093.203583, 27282.315826, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20296.349640, 32406.153320, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20889.067673, 33031.176422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19868.947006, 31273.631989, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18448.931137, 30141.700073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20133.601654, 29287.863892, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jul 22 10:15:09 2012] Writing fullrun_pn_xmm0551060101_pi300-10000_pass1_cl_src51.gif
[Sun Jul 22 12:44:08 2012] Mean detx,y = (5444.76, 4395.17) 
[Sun Jul 22 12:44:14 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 22 12:44:35 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 22 12:44:36 2012] Setting source spectrum file to fullrun_pn_xmm0551060101_pi300-10000_pass1_cl_src51_src_b10.pi.gz
[Sun Jul 22 12:44:36 2012] Setting bgd. spectrum file to fullrun_pn_xmm0551060101_pi300-10000_pass1_cl_src51_bgd.pi.gz
[Sun Jul 22 17:02:54 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jul 22 17:02:54 2012] rmf not generated due to insufficient counts
[Mon Jul 23 11:54:38 2012] Updating aperture counts using extracted products
[Mon Jul 23 11:54:38 2012] Error reading totcts from fullrun_pn_xmm0551060101_pi300-10000_pass1_cl_src51_src_b10.pi.gz
[Mon Jul 23 11:54:46 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 23 11:54:46 2012] Using photon index=1.80, rate=0.0126, arf fullrun_pn_xmm0551060101_pi300-10000_pass1_cl_src51.arf
[Mon Jul 23 11:54:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 23 11:54:46 2012] Updating source flux to 4.4e-14
[Mon Jul 23 12:15:49 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting