[Fri Jul 20 10:34:25 2012] Detection parameters:
  Position = (325.4, 273.7) = 18 55 58.22 1 12 44.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2722.8 +/- 446.8
  Background counts = 572.5
  Rate = 0.04 +/- 0.006

[Fri Jul 20 10:34:35 2012] Off-axis axis estimate = 2.65'
[Fri Jul 20 10:46:11 2012] Using EEF radius (= 7.75 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 10:46:11 2012] Initial guess for spatial extent in simple fitting = 7.75"
[Fri Jul 20 10:46:11 2012] source mask rpix=1.8, npix_max = 20, mask sum = 4, frac = 0.192
[Fri Jul 20 10:46:11 2012] Skipping simple spatial due to low active detector fraction
[Sat Jul 21 10:07:53 2012] Vigneting correction estimate = 1.000000
[Sat Jul 21 10:07:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 21 10:07:53 2012] Assessing source extent using major
[Sat Jul 21 10:07:53 2012] Source does appear to be extended
[Sat Jul 21 10:07:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 21 10:09:46 2012] Using EEF radius (= 7.75 ")to estimate initial spatial extent for simple fitting
[Sat Jul 21 10:09:46 2012] Initial guess for spatial extent in simple fitting = 7.75"
[Sat Jul 21 10:09:46 2012] source mask rpix=1.8, npix_max = 20, mask sum = 4, frac = 0.192
[Sat Jul 21 10:09:46 2012] Skipping simple spatial due to low active detector fraction
[Sun Jul 22 10:12:51 2012] Vigneting correction estimate = 1.000000
[Sun Jul 22 10:12:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 22 10:12:51 2012] Assessing source extent using major
[Sun Jul 22 10:12:51 2012] Source does appear to be extended
[Sun Jul 22 10:12:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 22 10:15:03 2012] Counts = 2722.845459, rescaling region sizes by 2.000000
[Sun Jul 22 10:15:03 2012] XMMSAS src. selection expression = ellipse(28258.848877, 23763.881622, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun Jul 22 10:15:03 2012] Writing source region out to fullrun_pn_xmm0551060101_pi300-10000_pass1_cl_src5_src.reg
[Sun Jul 22 10:15:03 2012] Extracting stamp from image fullrun_pn_xmm0551060101_pi300-10000_cl_sm2.00.img.gz, (250, 199) - (400, 349)
[Sun Jul 22 10:15:03 2012] XMMSAS bgd. selection expression = annulus(28258.848877, 23763.881622, 4350.000000, 8700.000000, X, Y) && !ellipse(28553.541199, 31909.033600, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21046.651627, 31396.820038, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30029.846344, 30903.202301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26508.624000, 33761.848600, 1317.024038, 1317.024038, 0.000000, X, Y) && !ellipse(32051.310114, 33411.992794, 1470.353793, 1132.509045, 223.606600, X, Y) && !ellipse(22699.257355, 32756.399475, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25594.657200, 32651.420400, 1478.864043, 1478.864043, 0.000000, X, Y) && !ellipse(30178.883759, 32342.706085, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26133.618000, 32531.766000, 2691.408077, 2691.408077, 0.000000, X, Y) && !ellipse(26201.014800, 32712.906000, 841.232024, 841.232024, 0.000000, X, Y) && !ellipse(22106.066727, 32164.715576, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20958.197998, 31873.132294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26455.442000, 32611.812000, 1460.664042, 1460.664042, 0.000000, X, Y) && !ellipse(29714.386383, 31447.047882, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27975.304000, 31945.423200, 1453.744042, 1453.744042, 0.000000, X, Y) && !ellipse(20541.501770, 31348.517090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29438.842133, 31093.737823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26156.628800, 30817.728420, 524.113615, 524.113615, 0.000000, X, Y) && !ellipse(32109.174000, 30558.852000, 1506.312043, 1506.312043, 0.000000, X, Y) && !ellipse(20962.000000, 30289.125885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27116.178800, 30274.932200, 867.600025, 867.600025, 0.000000, X, Y) && !ellipse(20372.952545, 30323.582855, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31391.072000, 30244.632000, 2864.208082, 2864.208082, 0.000000, X, Y) && !ellipse(24751.082000, 30181.216200, 643.551219, 643.551219, 0.000000, X, Y) && !ellipse(31027.754000, 29698.658000, 2053.624059, 2053.624059, 0.000000, X, Y) && !ellipse(29842.348175, 29702.584778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21657.988052, 15694.832077, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29041.540894, 29601.502502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27154.677400, 30043.508000, 1251.536036, 1251.536036, 0.000000, X, Y) && !ellipse(20262.260391, 29974.329681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29762.004333, 29344.365570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29072.389679, 29108.601624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27509.984589, 29016.549103, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29636.140015, 28919.011292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26722.398800, 28929.753000, 1243.640036, 760.647222, 168.049000, X, Y) && !ellipse(26546.992000, 28884.484000, 1243.640036, 1243.640036, 0.000000, X, Y) && !ellipse(21330.567184, 28411.998932, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20110.994080, 28496.298767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21205.020142, 28839.960449, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22699.647644, 28228.751465, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28128.837402, 28993.147675, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27399.997345, 28157.591370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26476.984180, 28093.958400, 722.636021, 722.636021, 0.000000, X, Y) && !ellipse(19614.242081, 27194.697205, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22130.081467, 27086.133057, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21093.203583, 27282.315826, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22372.622000, 26244.896000, 1225.904035, 1225.904035, 0.000000, X, Y) && !ellipse(22955.738495, 25881.949829, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24878.831970, 25612.472321, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19290.252838, 26755.265961, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22500.918701, 25192.494476, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20655.421112, 26051.855774, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23420.596000, 25446.248000, 942.904027, 408.674412, 90.000000, X, Y) && !ellipse(21660.716095, 25174.934113, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32580.971069, 24751.717133, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20787.997345, 24183.787781, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24527.066200, 24456.459200, 661.774419, 661.774419, 0.000000, X, Y) && !ellipse(21619.941483, 23919.607056, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30078.141400, 23747.711800, 462.516813, 462.516813, 0.000000, X, Y) && !ellipse(20823.666336, 23789.393799, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23215.336639, 22775.597412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21992.442093, 17313.168015, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20296.349640, 32406.153320, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32027.065600, 30802.796000, 1557.760045, 1557.760045, 0.000000, X, Y) && !ellipse(31505.753235, 31106.795258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26309.442000, 25147.612400, 1424.496041, 881.352025, 323.640000, X, Y) && !ellipse(25213.336456, 19446.156158, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27702.624000, 33785.118000, 1527.992044, 1527.992044, 0.000000, X, Y) && !ellipse(20889.067673, 33031.176422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25049.235600, 31770.402000, 1357.984039, 1357.984039, 0.000000, X, Y) && !ellipse(19868.947006, 31273.631989, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28939.242615, 31172.945312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28036.522034, 31118.065857, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24105.292600, 30877.410600, 1001.408029, 1001.408029, 0.000000, X, Y) && !ellipse(24742.971466, 30752.213440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30988.861511, 30394.095123, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29116.617157, 30157.083313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31005.462880, 29922.814000, 1479.728043, 1479.728043, 0.000000, X, Y) && !ellipse(24722.068800, 29849.346000, 1316.584038, 1316.584038, 0.000000, X, Y) && !ellipse(20133.601654, 29287.863892, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28719.087585, 28071.398499, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29898.520630, 28130.547241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23476.209198, 26743.289124, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26092.281250, 26043.872101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25619.054138, 25880.354156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26436.489868, 25967.149719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25710.028717, 25268.630096, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25347.402161, 25347.282684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24045.115601, 17006.663467, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23686.806000, 25172.076000, 1351.576039, 1351.576039, 0.000000, X, Y) && !ellipse(25460.495789, 24659.996490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22694.374756, 23504.989716, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21194.684113, 22296.404449, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22031.241364, 22127.628220, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34037.079407, 21788.061920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25086.003906, 19868.722656, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24611.534241, 19445.217606, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24399.907166, 17948.369171, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23863.240784, 17780.495651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24493.940338, 17095.624207, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jul 22 10:15:03 2012] Writing fullrun_pn_xmm0551060101_pi300-10000_pass1_cl_src5.gif
[Sun Jul 22 10:28:59 2012] Mean detx,y = (-3820.71, 81.04) 
[Sun Jul 22 10:29:19 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 22 10:31:33 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 22 10:31:33 2012] Setting source spectrum file to fullrun_pn_xmm0551060101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun Jul 22 10:31:33 2012] Setting bgd. spectrum file to fullrun_pn_xmm0551060101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sun Jul 22 16:07:57 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jul 22 16:07:57 2012] rmf not generated due to insufficient counts
[Mon Jul 23 11:54:35 2012] Updating aperture counts using extracted products
[Mon Jul 23 11:54:35 2012] Error reading totcts from fullrun_pn_xmm0551060101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Mon Jul 23 11:54:44 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 23 11:54:44 2012] Using photon index=1.80, rate=0.0387, arf fullrun_pn_xmm0551060101_pi300-10000_pass1_cl_src5.arf
[Mon Jul 23 11:54:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 23 11:54:44 2012] Updating source flux to 2.5e-13
[Mon Jul 23 12:15:49 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jul 23 12:26:01 2012] xmm0551060101/analysis//spectral/fullrun_pn_xmm0551060101_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete