[Fri Jul 20 10:34:31 2012] Detection parameters:
  Position = (362.7, 358.1) = 18 55 47.39 1 18 56.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 278.5 +/- 44.6
  Background counts = 892.0
  Rate = 0.008 +/- 0.001

[Fri Jul 20 10:34:35 2012] Off-axis axis estimate = 6.36'
[Fri Jul 20 10:46:11 2012] Using EEF radius (= 9.61 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 10:46:11 2012] Initial guess for spatial extent in simple fitting = 9.61"
[Fri Jul 20 10:46:11 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.022
[Fri Jul 20 10:46:11 2012] Giving source the simple spatial ID 90 for pass 0, mean size = 9.61"
[Fri Jul 20 22:33:18 2012] fullrun_pn_xmm0551060101_pi300-10000_cl_pass0_src90.ximg exists
[Fri Jul 20 22:33:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551060101_pi300-10000_cl_pass0_src90.csv
[Fri Jul 20 22:33:18 2012] fullrun_pn_xmm0551060101_pi300-10000_cl_pass0_src90_1.ximg exists
[Fri Jul 20 22:33:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551060101_pi300-10000_cl_pass0_src90.csv
[Fri Jul 20 22:33:18 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551060101_pi300-10000_cl_pass0_src90_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551060101_pi300-10000_cl_pass0_src90.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 22:33:21 2012] fullrun_pn_xmm0551060101_pi300-10000_cl_pass0_tfrozen_src90.ximg exists
[Fri Jul 20 22:33:21 2012] fullrun_pn_xmm0551060101_pi300-10000_cl_pass0_tfrozen_src90_1.ximg exists
[Fri Jul 20 22:33:21 2012] Fit fullrun_pn_xmm0551060101_pi300-10000_cl_pass0_tfrozen_src90 appears to have run properly
[Sat Jul 21 10:07:53 2012] Warning, spatial fit 90 centroid is now closest to src. 103
[Sat Jul 21 10:07:53 2012] Vigneting correction estimate = 1.000000
[Sat Jul 21 10:07:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 21 10:07:53 2012] Assessing source extent using major
[Sat Jul 21 10:07:53 2012] Source does appear to be extended
[Sat Jul 21 10:07:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 21 10:07:53 2012] Source is confused with source 48
[Sat Jul 21 10:09:46 2012] Using EEF radius (= 9.61 ")to estimate initial spatial extent for simple fitting
[Sat Jul 21 10:09:46 2012] Initial guess for spatial extent in simple fitting = 9.61"
[Sat Jul 21 10:09:46 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.022
[Sat Jul 21 10:09:46 2012] Giving source the simple spatial ID 83 for pass 1, mean size = 9.61"
[Sat Jul 21 18:26:26 2012] fullrun_pn_xmm0551060101_pi300-10000_cl_pass1_src83.ximg exists
[Sat Jul 21 18:26:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551060101_pi300-10000_cl_pass1_src83.csv
[Sat Jul 21 18:26:26 2012] fullrun_pn_xmm0551060101_pi300-10000_cl_pass1_src83_1.ximg exists
[Sat Jul 21 18:26:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551060101_pi300-10000_cl_pass1_src83.csv
[Sat Jul 21 18:26:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551060101_pi300-10000_cl_pass1_src83_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551060101_pi300-10000_cl_pass1_src83.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 18:26:28 2012] fullrun_pn_xmm0551060101_pi300-10000_cl_pass1_tfrozen_src83.ximg exists
[Sat Jul 21 18:26:28 2012] fullrun_pn_xmm0551060101_pi300-10000_cl_pass1_tfrozen_src83_1.ximg exists
[Sat Jul 21 18:26:28 2012] Fit fullrun_pn_xmm0551060101_pi300-10000_cl_pass1_tfrozen_src83 appears to have run properly
[Sun Jul 22 10:12:51 2012] Warning: source 83 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 104 at 10.287048 pixels away
[Sun Jul 22 10:12:51 2012] Vigneting correction estimate = 1.000000
[Sun Jul 22 10:12:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 22 10:12:51 2012] Assessing source extent using major
[Sun Jul 22 10:12:51 2012] Source does appear to be extended
[Sun Jul 22 10:12:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 22 10:15:16 2012] XMMSAS src. selection expression = ellipse(31505.753235, 31106.795258, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jul 22 10:15:16 2012] Writing source region out to fullrun_pn_xmm0551060101_pi300-10000_pass1_cl_src104_src.reg
[Sun Jul 22 10:15:16 2012] Extracting stamp from image fullrun_pn_xmm0551060101_pi300-10000_cl_sm2.00.img.gz, (325, 321) - (400, 396)
[Sun Jul 22 10:15:17 2012] XMMSAS bgd. selection expression = annulus(31505.753235, 31106.795258, 1087.500000, 2175.000000, X, Y) && !ellipse(28553.541199, 31909.033600, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30029.846344, 30903.202301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34042.688000, 34384.754000, 1813.176052, 1813.176052, 0.000000, X, Y) && !ellipse(32051.310114, 33411.992794, 1470.353793, 1132.509045, 223.606600, X, Y) && !ellipse(30178.883759, 32342.706085, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29714.386383, 31447.047882, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27975.304000, 31945.423200, 1453.744042, 1453.744042, 0.000000, X, Y) && !ellipse(29438.842133, 31093.737823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32109.174000, 30558.852000, 1506.312043, 1506.312043, 0.000000, X, Y) && !ellipse(31391.072000, 30244.632000, 2864.208082, 2864.208082, 0.000000, X, Y) && !ellipse(31027.754000, 29698.658000, 2053.624059, 2053.624059, 0.000000, X, Y) && !ellipse(29842.348175, 29702.584778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29041.540894, 29601.502502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29762.004333, 29344.365570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29072.389679, 29108.601624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29636.140015, 28919.011292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32027.065600, 30802.796000, 1557.760045, 1557.760045, 0.000000, X, Y) && !ellipse(28939.242615, 31172.945312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30988.861511, 30394.095123, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29116.617157, 30157.083313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31005.462880, 29922.814000, 1479.728043, 1479.728043, 0.000000, X, Y) && !ellipse(28719.087585, 28071.398499, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29898.520630, 28130.547241, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jul 22 10:15:17 2012] Writing fullrun_pn_xmm0551060101_pi300-10000_pass1_cl_src104.gif
[Sun Jul 22 14:51:21 2012] Mean detx,y = (-5215.56, 7858.49) 
[Sun Jul 22 14:51:26 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 22 14:51:42 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 22 14:51:43 2012] Setting source spectrum file to fullrun_pn_xmm0551060101_pi300-10000_pass1_cl_src104_src_b10.pi.gz
[Sun Jul 22 14:51:43 2012] Setting bgd. spectrum file to fullrun_pn_xmm0551060101_pi300-10000_pass1_cl_src104_bgd.pi.gz
[Sun Jul 22 19:42:45 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jul 22 19:42:45 2012] rmf not generated due to insufficient counts
[Mon Jul 23 11:54:40 2012] Updating aperture counts using extracted products
[Mon Jul 23 11:54:40 2012] Error reading totcts from fullrun_pn_xmm0551060101_pi300-10000_pass1_cl_src104_src_b10.pi.gz
[Mon Jul 23 11:54:47 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 23 11:54:47 2012] Using photon index=1.80, rate=0.00776, arf fullrun_pn_xmm0551060101_pi300-10000_pass1_cl_src104.arf
[Mon Jul 23 11:54:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 23 11:54:47 2012] Updating source flux to 3.5e-14
[Mon Jul 23 12:15:49 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting