[Fri Jul 20 10:37:17 2012] Detection parameters:
  Position = (274.5, 293.4) = 18 56 12.97 1 14 14.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 288.3 +/- 27.2
  Background counts = 433.3
  Rate = 0.005 +/- 0.0005

[Fri Jul 20 10:37:23 2012] Off-axis axis estimate = 1.77'
[Sat Jul 21 04:54:18 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Sat Jul 21 04:54:18 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Sat Jul 21 04:54:18 2012] source mask rpix=1.7, npix_max = 19, mask sum = 14, frac = 0.735
[Sat Jul 21 04:54:18 2012] Giving source the simple spatial ID 55 for pass 0, mean size = 7.31"
[Sat Jul 21 10:07:08 2012] fullrun_mos2_xmm0551060101_pi300-10000_cl_pass0_src55.ximg exists
[Sat Jul 21 10:07:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551060101_pi300-10000_cl_pass0_src55.csv
[Sat Jul 21 10:07:08 2012] fullrun_mos2_xmm0551060101_pi300-10000_cl_pass0_src55_1.ximg exists
[Sat Jul 21 10:07:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551060101_pi300-10000_cl_pass0_src55.csv
[Sat Jul 21 10:07:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551060101_pi300-10000_cl_pass0_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551060101_pi300-10000_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 10:07:12 2012] fullrun_mos2_xmm0551060101_pi300-10000_cl_pass0_tfrozen_src55.ximg exists
[Sat Jul 21 10:07:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551060101_pi300-10000_cl_pass0_tfrozen_src55.csv
[Sat Jul 21 10:07:12 2012] fullrun_mos2_xmm0551060101_pi300-10000_cl_pass0_tfrozen_src55_1.ximg exists
[Sat Jul 21 10:07:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551060101_pi300-10000_cl_pass0_tfrozen_src55.csv
[Sat Jul 21 10:07:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551060101_pi300-10000_cl_pass0_tfrozen_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551060101_pi300-10000_cl_pass0_tfrozen_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 10:08:57 2012] Warning, spatial fit 55 centroid is now closest to src. 23
[Sat Jul 21 10:08:58 2012] Vigneting correction estimate = 1.000000
[Sat Jul 21 10:08:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 21 10:08:58 2012] Assessing source extent using major
[Sat Jul 21 10:08:58 2012] Source does appear to be extended
[Sat Jul 21 10:08:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 21 10:08:58 2012] Source is confused with source 184
[Sun Jul 22 02:05:33 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 02:05:33 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Sun Jul 22 02:05:33 2012] source mask rpix=1.7, npix_max = 19, mask sum = 14, frac = 0.735
[Sun Jul 22 02:05:33 2012] Giving source the simple spatial ID 53 for pass 1, mean size = 7.31"
[Sun Jul 22 10:11:58 2012] fullrun_mos2_xmm0551060101_pi300-10000_cl_pass1_src53.ximg exists
[Sun Jul 22 10:11:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551060101_pi300-10000_cl_pass1_src53.csv
[Sun Jul 22 10:11:58 2012] fullrun_mos2_xmm0551060101_pi300-10000_cl_pass1_src53_1.ximg exists
[Sun Jul 22 10:11:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551060101_pi300-10000_cl_pass1_src53.csv
[Sun Jul 22 10:11:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551060101_pi300-10000_cl_pass1_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551060101_pi300-10000_cl_pass1_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 10:12:00 2012] fullrun_mos2_xmm0551060101_pi300-10000_cl_pass1_tfrozen_src53.ximg exists
[Sun Jul 22 10:12:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551060101_pi300-10000_cl_pass1_tfrozen_src53.csv
[Sun Jul 22 10:12:00 2012] fullrun_mos2_xmm0551060101_pi300-10000_cl_pass1_tfrozen_src53_1.ximg exists
[Sun Jul 22 10:12:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551060101_pi300-10000_cl_pass1_tfrozen_src53.csv
[Sun Jul 22 10:12:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551060101_pi300-10000_cl_pass1_tfrozen_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551060101_pi300-10000_cl_pass1_tfrozen_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 10:14:01 2012] Warning, spatial fit 53 centroid is now closest to src. 184
[Sun Jul 22 10:14:06 2012] Vigneting correction estimate = 1.000000
[Sun Jul 22 10:14:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 22 10:14:06 2012] Assessing source extent using major
[Sun Jul 22 10:14:06 2012] Source does appear to be extended
[Sun Jul 22 10:14:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 01:45:05 2012] XMMSAS src. selection expression = ellipse(23832.994690, 25481.146606, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jul 23 01:45:05 2012] Writing source region out to fullrun_mos2_xmm0551060101_pi300-10000_pass1_cl_src95_src.reg
[Mon Jul 23 01:45:05 2012] Extracting stamp from image fullrun_mos2_xmm0551060101_pi300-10000_cl_sm2.00.img.gz, (237, 256) - (312, 331)
[Mon Jul 23 01:45:05 2012] XMMSAS bgd. selection expression = annulus(23832.994690, 25481.146606, 1087.500000, 2175.000000, X, Y) && !ellipse(24474.290520, 24517.199200, 323.764009, 323.764009, 0.000000, X, Y) && !ellipse(21489.962400, 27402.976000, 1341.008039, 1341.008039, 0.000000, X, Y) && !ellipse(20731.068380, 26474.331800, 1374.624040, 1374.624040, 0.000000, X, Y) && !ellipse(24479.090000, 25408.048800, 790.196823, 790.196823, 0.000000, X, Y) && !ellipse(20882.351776, 25869.287994, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22128.271400, 26358.274000, 1295.408037, 1295.408037, 0.000000, X, Y) && !ellipse(22625.918800, 26825.342200, 753.209622, 753.209622, 0.000000, X, Y) && !ellipse(21232.800000, 25353.560000, 1343.512039, 1343.512039, 0.000000, X, Y) && !ellipse(24930.913025, 25843.882019, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21678.686000, 25215.352000, 1493.984043, 1493.984043, 0.000000, X, Y) && !ellipse(21685.242000, 27247.204000, 2590.816075, 2590.816075, 0.000000, X, Y) && !ellipse(22694.465400, 28446.075200, 1088.816031, 1088.816031, 0.000000, X, Y) && !ellipse(22239.520447, 25701.447662, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26603.132400, 27961.916000, 1184.592034, 1184.592034, 0.000000, X, Y) && !ellipse(22734.123199, 26229.187836, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22890.624000, 24586.064000, 1274.544037, 1274.544037, 0.000000, X, Y) && !ellipse(22356.846191, 24941.464111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22849.184204, 25704.052246, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24615.994690, 24430.763916, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21361.656250, 24411.639740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23170.020000, 25870.254000, 1241.688036, 1241.688036, 0.000000, X, Y) && !ellipse(25454.872437, 25269.976196, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25848.270782, 24760.388458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23371.927612, 24827.735931, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26856.735870, 25814.254547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22944.730743, 24176.688232, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25869.335785, 25418.302063, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 23 01:45:05 2012] Writing fullrun_mos2_xmm0551060101_pi300-10000_pass1_cl_src95.gif
[Mon Jul 23 02:38:13 2012] Mean detx,y = (-745.05, -667.80) 
[Mon Jul 23 02:38:14 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 23 02:38:23 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 23 02:38:23 2012] Setting source spectrum file to fullrun_mos2_xmm0551060101_pi300-10000_pass1_cl_src95_src_b10.pi.gz
[Mon Jul 23 02:38:23 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0551060101_pi300-10000_pass1_cl_src95_bgd.pi.gz
[Mon Jul 23 09:56:30 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jul 23 09:56:30 2012] rmf not generated due to insufficient counts
[Mon Jul 23 11:54:59 2012] Updating aperture counts using extracted products
[Mon Jul 23 11:54:59 2012] Error reading totcts from fullrun_mos2_xmm0551060101_pi300-10000_pass1_cl_src95_src_b10.pi.gz
[Mon Jul 23 11:55:06 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 23 11:55:06 2012] Using photon index=1.80, rate=0.00501, arf fullrun_mos2_xmm0551060101_pi300-10000_pass1_cl_src95.arf
[Mon Jul 23 11:55:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 23 11:55:07 2012] Updating source flux to 5.8e-14
[Mon Jul 23 12:05:38 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting