[Fri Jul 20 10:37:16 2012] Detection parameters:
  Position = (335.2, 340.8) = 18 55 55.35 1 17 43.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 271.6 +/- 33.8
  Background counts = 383.2
  Rate = 0.005 +/- 0.0006

[Fri Jul 20 10:37:23 2012] Off-axis axis estimate = 4.07'
[Sat Jul 21 04:54:18 2012] Using EEF radius (= 8.46 ")to estimate initial spatial extent for simple fitting
[Sat Jul 21 04:54:18 2012] Initial guess for spatial extent in simple fitting = 8.46"
[Sat Jul 21 04:54:18 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.045
[Sat Jul 21 04:54:18 2012] Giving source the simple spatial ID 63 for pass 0, mean size = 8.46"
[Sat Jul 21 10:07:08 2012] fullrun_mos2_xmm0551060101_pi300-10000_cl_pass0_src63.ximg exists
[Sat Jul 21 10:07:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551060101_pi300-10000_cl_pass0_src63.csv
[Sat Jul 21 10:07:08 2012] fullrun_mos2_xmm0551060101_pi300-10000_cl_pass0_src63_1.ximg exists
[Sat Jul 21 10:07:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551060101_pi300-10000_cl_pass0_src63.csv
[Sat Jul 21 10:07:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551060101_pi300-10000_cl_pass0_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551060101_pi300-10000_cl_pass0_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 10:07:12 2012] fullrun_mos2_xmm0551060101_pi300-10000_cl_pass0_tfrozen_src63.ximg exists
[Sat Jul 21 10:07:12 2012] fullrun_mos2_xmm0551060101_pi300-10000_cl_pass0_tfrozen_src63_1.ximg exists
[Sat Jul 21 10:07:12 2012] Fit fullrun_mos2_xmm0551060101_pi300-10000_cl_pass0_tfrozen_src63 appears to have run properly
[Sat Jul 21 10:08:57 2012] Warning, spatial fit 63 centroid is now closest to src. 49
[Sat Jul 21 10:08:58 2012] Vigneting correction estimate = 1.000000
[Sat Jul 21 10:08:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 21 10:08:58 2012] Assessing source extent using major
[Sat Jul 21 10:08:58 2012] Source does appear to be extended
[Sat Jul 21 10:08:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 21 10:08:58 2012] Source is confused with source 49
[Sun Jul 22 02:05:33 2012] Using EEF radius (= 8.46 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 02:05:33 2012] Initial guess for spatial extent in simple fitting = 8.46"
[Sun Jul 22 02:05:33 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.045
[Sun Jul 22 02:05:33 2012] Giving source the simple spatial ID 61 for pass 1, mean size = 8.46"
[Sun Jul 22 10:11:58 2012] fullrun_mos2_xmm0551060101_pi300-10000_cl_pass1_src61.ximg exists
[Sun Jul 22 10:11:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551060101_pi300-10000_cl_pass1_src61.csv
[Sun Jul 22 10:11:58 2012] fullrun_mos2_xmm0551060101_pi300-10000_cl_pass1_src61_1.ximg exists
[Sun Jul 22 10:11:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551060101_pi300-10000_cl_pass1_src61.csv
[Sun Jul 22 10:11:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551060101_pi300-10000_cl_pass1_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551060101_pi300-10000_cl_pass1_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 10:12:01 2012] fullrun_mos2_xmm0551060101_pi300-10000_cl_pass1_tfrozen_src61.ximg exists
[Sun Jul 22 10:12:01 2012] fullrun_mos2_xmm0551060101_pi300-10000_cl_pass1_tfrozen_src61_1.ximg exists
[Sun Jul 22 10:12:01 2012] Fit fullrun_mos2_xmm0551060101_pi300-10000_cl_pass1_tfrozen_src61 appears to have run properly
[Sun Jul 22 10:14:02 2012] Warning, spatial fit 61 centroid is now closest to src. 45
[Sun Jul 22 10:14:02 2012] Source 85 is offset by -4.860015 and -3.977848 pixels which is larger than
2 X fitted extent = 1.446828 x 1.446828, not incorporating fit results
[Sun Jul 22 10:14:06 2012] Vigneting correction estimate = 1.000000
[Sun Jul 22 10:14:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 22 10:14:06 2012] Assessing source extent using major
[Sun Jul 22 10:14:06 2012] Source does appear to be extended
[Sun Jul 22 10:14:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 01:45:06 2012] XMMSAS src. selection expression = ellipse(29117.474731, 29604.067261, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jul 23 01:45:06 2012] Writing source region out to fullrun_mos2_xmm0551060101_pi300-10000_pass1_cl_src85_src.reg
[Mon Jul 23 01:45:06 2012] Extracting stamp from image fullrun_mos2_xmm0551060101_pi300-10000_cl_sm2.00.img.gz, (298, 303) - (373, 378)
[Mon Jul 23 01:45:06 2012] XMMSAS bgd. selection expression = annulus(29117.474731, 29604.067261, 1087.500000, 2175.000000, X, Y) && !ellipse(26355.997345, 32009.136169, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26198.020447, 30570.110291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28020.772000, 32166.086000, 2232.600064, 2232.600064, 0.000000, X, Y) && !ellipse(28140.416000, 31783.845000, 845.976024, 845.976024, 0.000000, X, Y) && !ellipse(27558.092000, 31979.526000, 801.400023, 801.400023, 0.000000, X, Y) && !ellipse(27299.365200, 29701.556400, 1389.752040, 1389.752040, 0.000000, X, Y) && !ellipse(28419.398000, 29197.440000, 1354.200039, 1354.200039, 0.000000, X, Y) && !ellipse(27115.474800, 28963.585400, 1248.976036, 683.735220, 0.000000, X, Y) && !ellipse(31575.153046, 29310.344025, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26433.961600, 29382.598000, 1220.960035, 1220.960035, 0.000000, X, Y) && !ellipse(27202.885315, 30311.149353, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28444.319169, 32758.150383, 1158.664033, 1073.938097, 90.000000, X, Y) && !ellipse(27097.596000, 29057.269200, 1140.848033, 1140.848033, 0.000000, X, Y) && !ellipse(29202.488770, 31174.652496, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29184.790344, 29104.481018, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29490.745300, 31643.182861, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31884.177160, 30521.514000, 1554.704045, 1554.704045, 0.000000, X, Y) && !ellipse(28209.353821, 31049.305908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26180.858337, 30644.443146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30025.393860, 30538.010986, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31065.758000, 31153.168800, 1439.896041, 640.188818, 0.000000, X, Y) && !ellipse(29992.952400, 29299.465000, 908.240026, 908.240026, 0.000000, X, Y) && !ellipse(31901.180023, 31058.933044, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28004.592651, 30171.505432, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29781.036000, 28090.115800, 947.840027, 566.451216, 31.162000, X, Y) && !ellipse(26603.132400, 27961.916000, 1184.592034, 1184.592034, 0.000000, X, Y) && !ellipse(29819.988600, 32252.482000, 1555.616045, 1555.616045, 0.000000, X, Y) && !ellipse(28684.856293, 31022.044067, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29552.578000, 28120.488000, 1292.072037, 1292.072037, 0.000000, X, Y) && !ellipse(27787.910400, 28162.306702, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31143.357666, 30217.498505, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30293.270386, 28847.567108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30827.183502, 30380.995209, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 23 01:45:06 2012] Writing fullrun_mos2_xmm0551060101_pi300-10000_pass1_cl_src85.gif
[Mon Jul 23 02:41:27 2012] Mean detx,y = (3354.44, -5973.63) 
[Mon Jul 23 02:41:28 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 23 02:41:41 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 23 02:41:41 2012] Setting source spectrum file to fullrun_mos2_xmm0551060101_pi300-10000_pass1_cl_src85_src_b10.pi.gz
[Mon Jul 23 02:41:41 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0551060101_pi300-10000_pass1_cl_src85_bgd.pi.gz
[Mon Jul 23 10:06:42 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jul 23 10:06:42 2012] rmf not generated due to insufficient counts
[Mon Jul 23 11:54:59 2012] Updating aperture counts using extracted products
[Mon Jul 23 11:54:59 2012] Error reading totcts from fullrun_mos2_xmm0551060101_pi300-10000_pass1_cl_src85_src_b10.pi.gz
[Mon Jul 23 11:55:07 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 23 11:55:07 2012] Using photon index=1.80, rate=0.00473, arf fullrun_mos2_xmm0551060101_pi300-10000_pass1_cl_src85.arf
[Mon Jul 23 11:55:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 23 11:55:07 2012] Updating source flux to 6.3e-14
[Mon Jul 23 12:05:38 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting