[Fri Jul 20 10:37:15 2012] Detection parameters:
  Position = (302.9, 382.1) = 18 56 4.72 1 20 36.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 331.6 +/- 29.9
  Background counts = 467.4
  Rate = 0.007 +/- 0.0007

[Fri Jul 20 10:37:23 2012] Off-axis axis estimate = 6.07'
[Sat Jul 21 04:54:18 2012] Using EEF radius (= 9.46 ")to estimate initial spatial extent for simple fitting
[Sat Jul 21 04:54:18 2012] Initial guess for spatial extent in simple fitting = 9.46"
[Sat Jul 21 04:54:18 2012] source mask rpix=2.2, npix_max = 28, mask sum = 24, frac = 0.838
[Sat Jul 21 04:54:18 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 9.46"
[Sat Jul 21 10:07:07 2012] fullrun_mos2_xmm0551060101_pi300-10000_cl_pass0_src27.ximg exists
[Sat Jul 21 10:07:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551060101_pi300-10000_cl_pass0_src27.csv
[Sat Jul 21 10:07:07 2012] fullrun_mos2_xmm0551060101_pi300-10000_cl_pass0_src27_1.ximg exists
[Sat Jul 21 10:07:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551060101_pi300-10000_cl_pass0_src27.csv
[Sat Jul 21 10:07:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551060101_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551060101_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 10:07:11 2012] fullrun_mos2_xmm0551060101_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Sat Jul 21 10:07:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551060101_pi300-10000_cl_pass0_tfrozen_src27.csv
[Sat Jul 21 10:07:11 2012] fullrun_mos2_xmm0551060101_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Sat Jul 21 10:07:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551060101_pi300-10000_cl_pass0_tfrozen_src27.csv
[Sat Jul 21 10:07:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551060101_pi300-10000_cl_pass0_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551060101_pi300-10000_cl_pass0_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 10:08:56 2012] Warning, spatial fit 27 centroid is now closest to src. 39
[Sat Jul 21 10:08:58 2012] Vigneting correction estimate = 1.000000
[Sat Jul 21 10:08:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 21 10:08:58 2012] Assessing source extent using major
[Sat Jul 21 10:08:58 2012] Source does appear to be extended
[Sat Jul 21 10:08:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 21 10:08:58 2012] Source is confused with source 39
[Sun Jul 22 02:05:33 2012] Using EEF radius (= 9.46 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 02:05:33 2012] Initial guess for spatial extent in simple fitting = 9.46"
[Sun Jul 22 02:05:33 2012] source mask rpix=2.2, npix_max = 28, mask sum = 24, frac = 0.838
[Sun Jul 22 02:05:33 2012] Giving source the simple spatial ID 26 for pass 1, mean size = 9.46"
[Sun Jul 22 10:11:57 2012] fullrun_mos2_xmm0551060101_pi300-10000_cl_pass1_src26.ximg exists
[Sun Jul 22 10:11:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551060101_pi300-10000_cl_pass1_src26.csv
[Sun Jul 22 10:11:57 2012] fullrun_mos2_xmm0551060101_pi300-10000_cl_pass1_src26_1.ximg exists
[Sun Jul 22 10:11:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551060101_pi300-10000_cl_pass1_src26.csv
[Sun Jul 22 10:11:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551060101_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551060101_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 10:12:00 2012] fullrun_mos2_xmm0551060101_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Sun Jul 22 10:12:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551060101_pi300-10000_cl_pass1_tfrozen_src26.csv
[Sun Jul 22 10:12:00 2012] fullrun_mos2_xmm0551060101_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Sun Jul 22 10:12:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551060101_pi300-10000_cl_pass1_tfrozen_src26.csv
[Sun Jul 22 10:12:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551060101_pi300-10000_cl_pass1_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551060101_pi300-10000_cl_pass1_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 10:14:01 2012] Warning, spatial fit 26 centroid is now closest to src. 39
[Sun Jul 22 10:14:06 2012] Vigneting correction estimate = 1.000000
[Sun Jul 22 10:14:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 22 10:14:06 2012] Assessing source extent using major
[Sun Jul 22 10:14:06 2012] Source does appear to be extended
[Sun Jul 22 10:14:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 01:45:03 2012] XMMSAS src. selection expression = ellipse(26307.030640, 33189.912659, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jul 23 01:45:03 2012] Writing source region out to fullrun_mos2_xmm0551060101_pi300-10000_pass1_cl_src35_src.reg
[Mon Jul 23 01:45:03 2012] Extracting stamp from image fullrun_mos2_xmm0551060101_pi300-10000_cl_sm2.00.img.gz, (265, 345) - (340, 420)
[Mon Jul 23 01:45:03 2012] XMMSAS bgd. selection expression = annulus(26307.030640, 33189.912659, 1087.500000, 2175.000000, X, Y) && !ellipse(24949.007000, 32846.342000, 723.798421, 723.798421, 0.000000, X, Y) && !ellipse(26355.997345, 32009.136169, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24400.103638, 32900.341888, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26198.020447, 30570.110291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24632.856000, 32946.389600, 1505.064043, 576.049617, 21.584000, X, Y) && !ellipse(28020.772000, 32166.086000, 2232.600064, 2232.600064, 0.000000, X, Y) && !ellipse(28140.416000, 31783.845000, 845.976024, 845.976024, 0.000000, X, Y) && !ellipse(22670.900000, 32431.710000, 1522.832044, 1522.832044, 0.000000, X, Y) && !ellipse(27558.092000, 31979.526000, 801.400023, 801.400023, 0.000000, X, Y) && !ellipse(25984.343689, 32653.559570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27299.365200, 29701.556400, 1389.752040, 1389.752040, 0.000000, X, Y) && !ellipse(27202.885315, 30311.149353, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25595.480000, 30532.502000, 1156.880033, 1156.880033, 0.000000, X, Y) && !ellipse(28444.319169, 32758.150383, 1158.664033, 1073.938097, 90.000000, X, Y) && !ellipse(27083.557678, 32679.013336, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29202.488770, 31174.652496, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28209.353821, 31049.305908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26180.858337, 30644.443146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26767.593262, 33322.350830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28004.592651, 30171.505432, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21261.560000, 31805.132000, 2976.224086, 2976.224086, 0.000000, X, Y) && !ellipse(24675.592133, 30760.234283, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29819.988600, 32252.482000, 1555.616045, 1555.616045, 0.000000, X, Y) && !ellipse(24247.925323, 30930.488037, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28684.856293, 31022.044067, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24634.460419, 31923.325623, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23556.563660, 34667.513458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25638.133179, 34409.367615, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25674.106171, 33527.653625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27593.015320, 33439.918182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24679.797699, 34346.167297, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 23 01:45:03 2012] Writing fullrun_mos2_xmm0551060101_pi300-10000_pass1_cl_src35.gif
[Mon Jul 23 02:16:33 2012] Mean detx,y = (-288.71, -8749.30) 
[Mon Jul 23 02:16:34 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 23 02:16:52 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 23 02:16:52 2012] Setting source spectrum file to fullrun_mos2_xmm0551060101_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Mon Jul 23 02:16:52 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0551060101_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Mon Jul 23 04:38:31 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jul 23 04:38:31 2012] rmf not generated due to insufficient counts
[Mon Jul 23 11:54:58 2012] Updating aperture counts using extracted products
[Mon Jul 23 11:54:58 2012] Error reading totcts from fullrun_mos2_xmm0551060101_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Mon Jul 23 11:55:05 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 23 11:55:05 2012] Using photon index=1.80, rate=0.00747, arf fullrun_mos2_xmm0551060101_pi300-10000_pass1_cl_src35.arf
[Mon Jul 23 11:55:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 23 11:55:05 2012] Updating source flux to 1.6e-13
[Mon Jul 23 12:05:38 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting