[Fri Jul 20 10:35:46 2012] Detection parameters:
  Position = (339.4, 328.2) = 18 55 54.16 1 16 47.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 121.5 +/- 27.2
  Background counts = 318.2
  Rate = 0.002 +/- 0.0005

[Fri Jul 20 10:35:48 2012] Off-axis axis estimate = 3.67'
[Fri Jul 20 22:33:21 2012] Using EEF radius (= 8.26 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 22:33:21 2012] Initial guess for spatial extent in simple fitting = 8.26"
[Fri Jul 20 22:33:21 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.086
[Fri Jul 20 22:33:21 2012] Giving source the simple spatial ID 100 for pass 0, mean size = 8.26"
[Sat Jul 21 04:54:15 2012] fullrun_mos1_xmm0551060101_pi300-10000_cl_pass0_src100.ximg exists
[Sat Jul 21 04:54:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551060101_pi300-10000_cl_pass0_src100.csv
[Sat Jul 21 04:54:15 2012] fullrun_mos1_xmm0551060101_pi300-10000_cl_pass0_src100_1.ximg exists
[Sat Jul 21 04:54:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551060101_pi300-10000_cl_pass0_src100.csv
[Sat Jul 21 04:54:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551060101_pi300-10000_cl_pass0_src100_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551060101_pi300-10000_cl_pass0_src100.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 04:54:17 2012] fullrun_mos1_xmm0551060101_pi300-10000_cl_pass0_tfrozen_src100.ximg exists
[Sat Jul 21 04:54:17 2012] fullrun_mos1_xmm0551060101_pi300-10000_cl_pass0_tfrozen_src100_1.ximg exists
[Sat Jul 21 04:54:17 2012] Fit fullrun_mos1_xmm0551060101_pi300-10000_cl_pass0_tfrozen_src100 appears to have run properly
[Sat Jul 21 10:08:28 2012] Warning, spatial fit 100 centroid is now closest to src. 2
[Sat Jul 21 10:08:28 2012] Vigneting correction estimate = 1.000000
[Sat Jul 21 10:08:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 21 10:08:28 2012] Assessing source extent using major
[Sat Jul 21 10:08:28 2012] Source does appear to be extended
[Sat Jul 21 10:08:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 21 10:08:28 2012] Source is confused with source 98
[Sat Jul 21 18:26:29 2012] Using EEF radius (= 8.26 ")to estimate initial spatial extent for simple fitting
[Sat Jul 21 18:26:29 2012] Initial guess for spatial extent in simple fitting = 8.26"
[Sat Jul 21 18:26:29 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.086
[Sat Jul 21 18:26:29 2012] Giving source the simple spatial ID 91 for pass 1, mean size = 8.26"
[Sun Jul 22 02:05:30 2012] fullrun_mos1_xmm0551060101_pi300-10000_cl_pass1_src91.ximg exists
[Sun Jul 22 02:05:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551060101_pi300-10000_cl_pass1_src91.csv
[Sun Jul 22 02:05:30 2012] fullrun_mos1_xmm0551060101_pi300-10000_cl_pass1_src91_1.ximg exists
[Sun Jul 22 02:05:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551060101_pi300-10000_cl_pass1_src91.csv
[Sun Jul 22 02:05:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551060101_pi300-10000_cl_pass1_src91_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551060101_pi300-10000_cl_pass1_src91.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 02:05:33 2012] fullrun_mos1_xmm0551060101_pi300-10000_cl_pass1_tfrozen_src91.ximg exists
[Sun Jul 22 02:05:33 2012] fullrun_mos1_xmm0551060101_pi300-10000_cl_pass1_tfrozen_src91_1.ximg exists
[Sun Jul 22 02:05:33 2012] Fit fullrun_mos1_xmm0551060101_pi300-10000_cl_pass1_tfrozen_src91 appears to have run properly
[Sun Jul 22 10:13:28 2012] Warning: source 52 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 97 at 51.915570 pixels away
[Sun Jul 22 10:13:28 2012] Warning, spatial fit 91 centroid is now closest to src. 2
[Sun Jul 22 10:13:28 2012] Vigneting correction estimate = 1.000000
[Sun Jul 22 10:13:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 22 10:13:28 2012] Assessing source extent using major
[Sun Jul 22 10:13:28 2012] Source does appear to be extended
[Sun Jul 22 10:13:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 22 20:25:16 2012] XMMSAS src. selection expression = ellipse(29475.861206, 28500.937103, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jul 22 20:25:16 2012] Writing source region out to fullrun_mos1_xmm0551060101_pi300-10000_pass1_cl_src97_src.reg
[Sun Jul 22 20:25:16 2012] Extracting stamp from image fullrun_mos1_xmm0551060101_pi300-10000_cl_sm2.00.img.gz, (302, 291) - (377, 366)
[Sun Jul 22 20:25:17 2012] XMMSAS bgd. selection expression = annulus(29475.861206, 28500.937103, 1087.500000, 2175.000000, X, Y) && !ellipse(29162.904938, 29246.657837, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26765.512000, 29316.035600, 2561.504074, 2561.504074, 0.000000, X, Y) && !ellipse(27350.061554, 30301.920471, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28604.524000, 28914.878000, 1338.712039, 1300.200037, 139.094000, X, Y) && !ellipse(26996.449800, 29180.151000, 1256.640036, 1256.640036, 0.000000, X, Y) && !ellipse(27440.911700, 29424.801240, 1280.752037, 1280.752037, 0.000000, X, Y) && !ellipse(26696.306000, 29570.626000, 1313.752038, 1313.752038, 0.000000, X, Y) && !ellipse(26946.231598, 30559.933563, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29575.902710, 29863.806122, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27935.145050, 30298.516724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28913.961426, 30051.330841, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30927.485199, 29441.077667, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29939.363800, 29381.539600, 1008.856029, 1008.856029, 0.000000, X, Y) && !ellipse(26597.326233, 28320.458832, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30094.240000, 28156.513000, 1333.832038, 1333.832038, 0.000000, X, Y) && !ellipse(26398.957600, 28998.110000, 1173.000034, 1173.000034, 0.000000, X, Y)
[Sun Jul 22 20:25:17 2012] Writing fullrun_mos1_xmm0551060101_pi300-10000_pass1_cl_src97.gif
[Sun Jul 22 21:50:54 2012] Mean detx,y = (-4795.72, -4159.24) 
[Sun Jul 22 21:50:55 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 22 21:51:07 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 22 21:51:07 2012] Setting source spectrum file to fullrun_mos1_xmm0551060101_pi300-10000_pass1_cl_src97_src_b10.pi.gz
[Sun Jul 22 21:51:07 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0551060101_pi300-10000_pass1_cl_src97_bgd.pi.gz
[Mon Jul 23 01:23:28 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jul 23 01:23:28 2012] rmf not generated due to insufficient counts
[Mon Jul 23 11:54:52 2012] Updating aperture counts using extracted products
[Mon Jul 23 11:54:52 2012] Error reading totcts from fullrun_mos1_xmm0551060101_pi300-10000_pass1_cl_src97_src_b10.pi.gz
[Mon Jul 23 11:54:56 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 23 11:54:56 2012] Using photon index=1.80, rate=0.00225, arf fullrun_mos1_xmm0551060101_pi300-10000_pass1_cl_src97.arf
[Mon Jul 23 11:54:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 23 11:54:56 2012] Updating source flux to 2.9e-14
[Mon Jul 23 11:55:13 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting