[Fri Jul 20 10:35:46 2012] Detection parameters:
  Position = (271.7, 346.1) = 18 56 13.78 1 18 2.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 129.1 +/- 28.4
  Background counts = 370.6
  Rate = 0.002 +/- 0.0005

[Fri Jul 20 10:35:48 2012] Off-axis axis estimate = 3.96'
[Fri Jul 20 22:33:21 2012] Using EEF radius (= 8.41 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 22:33:21 2012] Initial guess for spatial extent in simple fitting = 8.41"
[Fri Jul 20 22:33:21 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.056
[Fri Jul 20 22:33:21 2012] Giving source the simple spatial ID 104 for pass 0, mean size = 8.41"
[Sat Jul 21 10:08:27 2012] Source 88 is offset by 2.278759 and -6.352735 pixels which is larger than
2 X fitted extent = 2.899821 x 2.899821, not incorporating fit results
[Sat Jul 21 10:08:27 2012] Spatial fit model total counts = 4633.910000, observed total counts = 3656.000000
[Sat Jul 21 10:08:27 2012] Poor agreement between spatial fit and data for source 88
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jul 21 10:08:28 2012] Vigneting correction estimate = 1.000000
[Sat Jul 21 10:08:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 21 10:08:28 2012] Assessing source extent using major
[Sat Jul 21 10:08:28 2012] Source does appear to be extended
[Sat Jul 21 10:08:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 21 18:26:29 2012] Using EEF radius (= 8.41 ")to estimate initial spatial extent for simple fitting
[Sat Jul 21 18:26:29 2012] Initial guess for spatial extent in simple fitting = 8.41"
[Sat Jul 21 18:26:29 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.056
[Sat Jul 21 18:26:29 2012] Giving source the simple spatial ID 93 for pass 1, mean size = 8.41"
[Sun Jul 22 02:05:30 2012] fullrun_mos1_xmm0551060101_pi300-10000_cl_pass1_src93.ximg exists
[Sun Jul 22 02:05:30 2012] fullrun_mos1_xmm0551060101_pi300-10000_cl_pass1_src93_1.ximg exists
[Sun Jul 22 02:05:30 2012] Fit fullrun_mos1_xmm0551060101_pi300-10000_cl_pass1_src93 appears to have run properly
[Sun Jul 22 02:05:33 2012] fullrun_mos1_xmm0551060101_pi300-10000_cl_pass1_tfrozen_src93.ximg exists
[Sun Jul 22 02:05:33 2012] fullrun_mos1_xmm0551060101_pi300-10000_cl_pass1_tfrozen_src93_1.ximg exists
[Sun Jul 22 02:05:33 2012] Fit fullrun_mos1_xmm0551060101_pi300-10000_cl_pass1_tfrozen_src93 appears to have run properly
[Sun Jul 22 10:13:28 2012] Source 88 is offset by 2.292184 and -6.326299 pixels which is larger than
2 X fitted extent = 2.945154 x 2.945154, not incorporating fit results
[Sun Jul 22 10:13:28 2012] Spatial fit model total counts = 4606.370000, observed total counts = 3656.000000
[Sun Jul 22 10:13:28 2012] Poor agreement between spatial fit and data for source 88
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jul 22 10:13:28 2012] Spatial fit model total counts = 9096.730000, observed total counts = 8970.000000
[Sun Jul 22 10:13:28 2012] Offset between fit and detection position for source 88 = 4.416800 pixels
[Sun Jul 22 10:13:28 2012] Warning, changing simple spatial fit ID from 93 to 73
[Sun Jul 22 10:13:28 2012] 9010.810000 total counts/ 6452.030000 bgd. counts: snr = 31.855524
Spatial fit parameters:
  Offset between fit and detection position for source 88 = 4.416800 pixels
  Position = (276.1, 345.9) = 18 56 12.50 1 18 4.3
  Extent = 32.3 (32.3-64.6)", rotation angle = 0
  Source counts = 2558.8 +/- 94.9
  Background counts = 6452.0
  Rate = 0.03 +/- 0.001
[Sun Jul 22 10:13:28 2012] Vigneting correction estimate = 1.000000
[Sun Jul 22 10:13:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 22 10:13:28 2012] Assessing source extent using major axis lower bound
[Sun Jul 22 10:13:28 2012] Source does appear to be extended
[Sun Jul 22 10:13:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 22 10:13:28 2012] Source is confused with source 31
[Sun Jul 22 10:13:28 2012] Source is confused with source 20
[Sun Jul 22 10:13:28 2012] Source is confused with source 21
[Sun Jul 22 10:13:28 2012] Source is confused with source 22
[Sun Jul 22 10:13:28 2012] Source is confused with source 18
[Sun Jul 22 10:13:28 2012] Source is confused with source 17
[Sun Jul 22 10:13:28 2012] Source is confused with source 92
[Sun Jul 22 10:13:28 2012] Source is confused with source 91
[Sun Jul 22 20:25:17 2012] Counts = 2558.780000, rescaling region sizes by 2.000000
[Sun Jul 22 20:25:17 2012] XMMSAS src. selection expression = ellipse(23975.558000, 30042.002000, 3875.496112, 3875.496112, 0.000000, X, Y)
[Sun Jul 22 20:25:17 2012] Writing source region out to fullrun_mos1_xmm0551060101_pi300-10000_pass1_cl_src88_src.reg
[Sun Jul 22 20:25:17 2012] Extracting stamp from image fullrun_mos1_xmm0551060101_pi300-10000_cl_sm2.00.img.gz, (53, 123) - (499, 569)
[Sun Jul 22 20:25:17 2012] XMMSAS bgd. selection expression = annulus(23975.558000, 30042.002000, 12918.320372, 25836.640743, X, Y) && !ellipse(23035.214142, 25053.662994, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29162.904938, 29246.657837, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26765.512000, 29316.035600, 2561.504074, 2561.504074, 0.000000, X, Y) && !ellipse(26406.870361, 30164.854584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19439.583734, 27216.197800, 657.903219, 657.903219, 0.000000, X, Y) && !ellipse(24598.011200, 24641.197400, 534.633615, 534.633615, 0.000000, X, Y) && !ellipse(20306.458664, 27572.858337, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26460.689600, 22093.607200, 319.072809, 319.072809, 0.000000, X, Y) && !ellipse(20674.746000, 26445.892000, 1084.440031, 1084.440031, 0.000000, X, Y) && !ellipse(20479.099289, 26910.035583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21463.404000, 27476.180800, 1360.456039, 1360.456039, 0.000000, X, Y) && !ellipse(27350.061554, 30301.920471, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28604.524000, 28914.878000, 1338.712039, 1300.200037, 139.094000, X, Y) && !ellipse(19946.282700, 27663.771851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21046.824000, 28968.070000, 1371.128039, 1371.128039, 0.000000, X, Y) && !ellipse(26996.449800, 29180.151000, 1256.640036, 1256.640036, 0.000000, X, Y) && !ellipse(24757.227720, 30072.164000, 817.368024, 817.368024, 0.000000, X, Y) && !ellipse(12239.796800, 26028.041000, 360.472810, 360.472810, 0.000000, X, Y) && !ellipse(22002.951200, 25497.208600, 1004.000029, 1004.000029, 0.000000, X, Y) && !ellipse(27440.911700, 29424.801240, 1280.752037, 1280.752037, 0.000000, X, Y) && !ellipse(26696.306000, 29570.626000, 1313.752038, 1313.752038, 0.000000, X, Y) && !ellipse(23993.655823, 31145.856049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21462.434525, 28479.293304, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26425.139618, 30728.525269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21547.611847, 24928.616425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21956.204926, 26401.993073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26946.231598, 30559.933563, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24629.448000, 29864.182000, 2526.656073, 2526.656073, 0.000000, X, Y) && !ellipse(22749.394928, 26453.556396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20526.401000, 30214.676000, 1409.104041, 1409.104041, 0.000000, X, Y) && !ellipse(19437.172000, 27094.574000, 1488.640043, 1488.640043, 0.000000, X, Y) && !ellipse(24593.498627, 31046.178284, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29575.902710, 29863.806122, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27935.145050, 30298.516724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24944.721832, 31146.721588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28913.961426, 30051.330841, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15981.774368, 22840.738556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22094.315567, 24784.881104, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22134.026840, 25878.437225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30927.485199, 29441.077667, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18347.322000, 30148.103200, 1603.912046, 1603.912046, 0.000000, X, Y) && !ellipse(18022.619720, 30547.600952, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16244.399246, 17328.226013, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21464.760000, 31111.952000, 1485.208043, 1485.208043, 0.000000, X, Y) && !ellipse(29939.363800, 29381.539600, 1008.856029, 1008.856029, 0.000000, X, Y) && !ellipse(20055.367233, 28394.680176, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21872.155991, 31739.541840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22552.651947, 27519.306396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19182.785200, 26316.646000, 1002.392029, 1002.392029, 0.000000, X, Y) && !ellipse(30112.897800, 23732.900800, 582.218417, 582.218417, 0.000000, X, Y) && !ellipse(26597.326233, 28320.458832, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19708.602800, 28779.729600, 1474.592042, 1474.592042, 0.000000, X, Y) && !ellipse(33979.388275, 34474.522034, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21079.218000, 24568.230000, 1327.104038, 1327.104038, 0.000000, X, Y) && !ellipse(18879.421570, 27936.228302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20201.886000, 31243.578000, 1552.264045, 311.425609, 7.739000, X, Y) && !ellipse(22824.550842, 31500.214844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18316.238000, 27228.125400, 1513.592044, 1513.592044, 0.000000, X, Y) && !ellipse(19020.909000, 28583.373600, 546.729616, 546.729616, 0.000000, X, Y) && !ellipse(20306.041824, 32316.686798, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34557.096000, 34966.850000, 1827.032053, 1827.032053, 0.000000, X, Y) && !ellipse(22602.985992, 25164.879517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16899.037200, 30522.456000, 717.472021, 717.472021, 0.000000, X, Y) && !ellipse(22533.908000, 32669.708000, 2970.416085, 2970.416085, 0.000000, X, Y) && !ellipse(24747.858600, 25000.452000, 1072.768031, 1072.768031, 0.000000, X, Y) && !ellipse(20946.044000, 30861.144000, 1118.400032, 1118.400032, 0.000000, X, Y) && !ellipse(25684.341309, 20776.418762, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24197.737305, 17698.637115, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19052.096000, 30522.376000, 2253.864065, 2253.864065, 0.000000, X, Y) && !ellipse(24576.032400, 29683.705800, 1291.832037, 1291.832037, 0.000000, X, Y) && !ellipse(24754.244040, 25777.578800, 1091.968031, 1091.968031, 0.000000, X, Y) && !ellipse(25285.206000, 18370.038400, 1042.048030, 1042.048030, 0.000000, X, Y) && !ellipse(23309.628000, 25555.842000, 1240.200036, 1240.200036, 0.000000, X, Y) && !ellipse(34904.711121, 34657.793396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30094.240000, 28156.513000, 1333.832038, 1333.832038, 0.000000, X, Y) && !ellipse(18472.567535, 18570.750519, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18141.611496, 31772.360657, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19759.696533, 29327.083984, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24122.160000, 17041.254000, 1499.560043, 1499.560043, 0.000000, X, Y) && !ellipse(25299.012000, 19795.824000, 1460.192042, 1460.192042, 0.000000, X, Y) && !ellipse(25846.940000, 19483.406200, 1460.192042, 1460.192042, 0.000000, X, Y) && !ellipse(25319.906000, 16321.746000, 1189.840034, 1189.840034, 0.000000, X, Y) && !ellipse(26398.957600, 28998.110000, 1173.000034, 1173.000034, 0.000000, X, Y) && !ellipse(24834.104956, 25692.170000, 1109.752032, 1109.752032, 0.000000, X, Y) && !ellipse(29475.861206, 28500.937103, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22653.788000, 29816.067400, 1289.664037, 1289.664037, 0.000000, X, Y) && !ellipse(35460.674000, 33538.900000, 1847.408053, 1847.408053, 0.000000, X, Y) && !ellipse(22269.322000, 23936.284000, 1320.240038, 1320.240038, 0.000000, X, Y) && !ellipse(33639.735687, 32639.140106, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33687.361603, 33548.097351, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jul 22 20:25:17 2012] Writing fullrun_mos1_xmm0551060101_pi300-10000_pass1_cl_src88.gif
[Sun Jul 22 21:51:30 2012] Mean detx,y = (-3968.46, 1443.56) 
[Sun Jul 22 21:51:34 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 22 22:02:36 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 22 22:02:37 2012] Setting source spectrum file to fullrun_mos1_xmm0551060101_pi300-10000_pass1_cl_src88_src_b10.pi.gz
[Sun Jul 22 22:02:37 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0551060101_pi300-10000_pass1_cl_src88_bgd.pi.gz
[Mon Jul 23 11:54:52 2012] Updating aperture counts using extracted products
[Mon Jul 23 11:54:52 2012] Error reading totcts from fullrun_mos1_xmm0551060101_pi300-10000_pass1_cl_src88_src_b10.pi.gz
[Mon Jul 23 11:54:56 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 23 11:54:56 2012] Using photon index=1.80, rate=0.0343, arf fullrun_mos1_xmm0551060101_pi300-10000_pass1_cl_src88.arf
[Mon Jul 23 11:54:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 23 11:54:56 2012] Updating source flux to 3.3e-13
[Mon Jul 23 11:55:13 2012] Flag b found in src. 88 procflags, skipping spectral fitting
[Mon Jul 23 11:55:13 2012] Flag p found in src. 88 procflags, skipping spectral fitting
[Mon Jul 23 11:55:13 2012] Flag c found in src. 88 procflags, skipping spectral fitting