[Fri Jul 20 10:35:43 2012] Detection parameters:
  Position = (241.2, 333.9) = 18 56 22.64 1 17 13.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 542.5 +/- 39.5
  Background counts = 291.5
  Rate = 0.009 +/- 0.0006

[Fri Jul 20 10:35:48 2012] Off-axis axis estimate = 4.89'
[Fri Jul 20 22:33:21 2012] Using EEF radius (= 8.87 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 22:33:21 2012] Initial guess for spatial extent in simple fitting = 8.87"
[Fri Jul 20 22:33:21 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.969
[Fri Jul 20 22:33:21 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 8.87"
[Sat Jul 21 04:54:12 2012] fullrun_mos1_xmm0551060101_pi300-10000_cl_pass0_src16.ximg exists
[Sat Jul 21 04:54:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551060101_pi300-10000_cl_pass0_src16.csv
[Sat Jul 21 04:54:12 2012] fullrun_mos1_xmm0551060101_pi300-10000_cl_pass0_src16_1.ximg exists
[Sat Jul 21 04:54:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551060101_pi300-10000_cl_pass0_src16.csv
[Sat Jul 21 04:54:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551060101_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551060101_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 04:54:15 2012] fullrun_mos1_xmm0551060101_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Sat Jul 21 04:54:15 2012] fullrun_mos1_xmm0551060101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Sat Jul 21 04:54:15 2012] Fit fullrun_mos1_xmm0551060101_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Sat Jul 21 10:08:27 2012] Spatial fit model total counts = 5965.950000, observed total counts = 5969.000000
[Sat Jul 21 10:08:27 2012] Offset between fit and detection position for source 40 = 3.185420 pixels
[Sat Jul 21 10:08:27 2012] 5961.090000 total counts/ 5187.960000 bgd. counts: snr = 10.733818
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 3.185420 pixels
  Position = (242.1, 330.9) = 18 56 22.37 1 16 59.2
  Extent = 17.7 (10.8-35.5)", rotation angle = 0
  Source counts = 773.1 +/- 77.2
  Background counts = 5188.0
  Rate = 0.01 +/- 0.001
[Sat Jul 21 10:08:27 2012] Spatial fit model total counts = 6564.500000, observed total counts = 6563.000000
[Sat Jul 21 10:08:27 2012] Offset between fit and detection position for source 40 = 2.646829 pixels
[Sat Jul 21 10:08:27 2012] Warning, changing simple spatial fit ID from 16 to 27
[Sat Jul 21 10:08:27 2012] 6432.633000 total counts/ 5752.840000 bgd. counts: snr = 8.962631
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 2.646829 pixels
  Position = (242.5, 333.5) = 18 56 22.26 1 17 10.6
  Extent = 17.1 (17.1-34.3)", rotation angle = 0
  Source counts = 679.8 +/- 80.2
  Background counts = 5752.8
  Rate = 0.009 +/- 0.001
[Sat Jul 21 10:08:28 2012] Vigneting correction estimate = 1.000000
[Sat Jul 21 10:08:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 21 10:08:28 2012] Assessing source extent using major axis lower bound
[Sat Jul 21 10:08:28 2012] Source does appear to be extended
[Sat Jul 21 10:08:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 21 10:08:28 2012] Source is confused with source 44
[Sat Jul 21 18:26:29 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jul 21 18:26:29 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jul 21 18:26:29 2012] Initial guess for spatial extent in simple fitting = 17.14"
[Sat Jul 21 18:26:29 2012] source mask rpix=3.9, npix_max = 78, mask sum = 81, frac = 1.027
[Sat Jul 21 18:26:29 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 17.14"
[Sun Jul 22 02:05:28 2012] fullrun_mos1_xmm0551060101_pi300-10000_cl_pass1_src15.ximg exists
[Sun Jul 22 02:05:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551060101_pi300-10000_cl_pass1_src15.csv
[Sun Jul 22 02:05:28 2012] fullrun_mos1_xmm0551060101_pi300-10000_cl_pass1_src15_1.ximg exists
[Sun Jul 22 02:05:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551060101_pi300-10000_cl_pass1_src15.csv
[Sun Jul 22 02:05:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551060101_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551060101_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 02:05:31 2012] fullrun_mos1_xmm0551060101_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Sun Jul 22 02:05:31 2012] fullrun_mos1_xmm0551060101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Sun Jul 22 02:05:31 2012] Fit fullrun_mos1_xmm0551060101_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Sun Jul 22 10:13:28 2012] Warning, spatial fit 15 centroid is now closest to src. 47
[Sun Jul 22 10:13:28 2012] Vigneting correction estimate = 1.000000
[Sun Jul 22 10:13:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 22 10:13:28 2012] Assessing source extent using major axis lower bound
[Sun Jul 22 10:13:28 2012] Source does appear to be extended
[Sun Jul 22 10:13:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 22 20:25:12 2012] XMMSAS src. selection expression = ellipse(21046.824000, 28968.070000, 1028.346030, 1028.346030, 0.000000, X, Y)
[Sun Jul 22 20:25:12 2012] Writing source region out to fullrun_mos1_xmm0551060101_pi300-10000_pass1_cl_src40_src.reg
[Sun Jul 22 20:25:12 2012] Extracting stamp from image fullrun_mos1_xmm0551060101_pi300-10000_cl_sm2.00.img.gz, (183, 274) - (302, 393)
[Sun Jul 22 20:25:12 2012] XMMSAS bgd. selection expression = annulus(21046.824000, 28968.070000, 1713.910049, 3427.820099, X, Y) && !ellipse(23035.214142, 25053.662994, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26765.512000, 29316.035600, 2561.504074, 2561.504074, 0.000000, X, Y) && !ellipse(19439.583734, 27216.197800, 657.903219, 657.903219, 0.000000, X, Y) && !ellipse(20306.458664, 27572.858337, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20674.746000, 26445.892000, 1084.440031, 1084.440031, 0.000000, X, Y) && !ellipse(20479.099289, 26910.035583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21463.404000, 27476.180800, 1360.456039, 1360.456039, 0.000000, X, Y) && !ellipse(19946.282700, 27663.771851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24757.227720, 30072.164000, 817.368024, 817.368024, 0.000000, X, Y) && !ellipse(22002.951200, 25497.208600, 1004.000029, 1004.000029, 0.000000, X, Y) && !ellipse(23993.655823, 31145.856049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21462.434525, 28479.293304, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21547.611847, 24928.616425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21956.204926, 26401.993073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24629.448000, 29864.182000, 2526.656073, 2526.656073, 0.000000, X, Y) && !ellipse(22749.394928, 26453.556396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20526.401000, 30214.676000, 1409.104041, 1409.104041, 0.000000, X, Y) && !ellipse(19437.172000, 27094.574000, 1488.640043, 1488.640043, 0.000000, X, Y) && !ellipse(24593.498627, 31046.178284, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24944.721832, 31146.721588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22094.315567, 24784.881104, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22134.026840, 25878.437225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18347.322000, 30148.103200, 1603.912046, 1603.912046, 0.000000, X, Y) && !ellipse(18022.619720, 30547.600952, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21464.760000, 31111.952000, 1485.208043, 1485.208043, 0.000000, X, Y) && !ellipse(20055.367233, 28394.680176, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21872.155991, 31739.541840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22552.651947, 27519.306396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19182.785200, 26316.646000, 1002.392029, 1002.392029, 0.000000, X, Y) && !ellipse(19708.602800, 28779.729600, 1474.592042, 1474.592042, 0.000000, X, Y) && !ellipse(21079.218000, 24568.230000, 1327.104038, 1327.104038, 0.000000, X, Y) && !ellipse(18879.421570, 27936.228302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20201.886000, 31243.578000, 1552.264045, 311.425609, 7.739000, X, Y) && !ellipse(22824.550842, 31500.214844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18316.238000, 27228.125400, 1513.592044, 1513.592044, 0.000000, X, Y) && !ellipse(19020.909000, 28583.373600, 546.729616, 546.729616, 0.000000, X, Y) && !ellipse(20306.041824, 32316.686798, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22602.985992, 25164.879517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22533.908000, 32669.708000, 2970.416085, 2970.416085, 0.000000, X, Y) && !ellipse(24747.858600, 25000.452000, 1072.768031, 1072.768031, 0.000000, X, Y) && !ellipse(20946.044000, 30861.144000, 1118.400032, 1118.400032, 0.000000, X, Y) && !ellipse(19052.096000, 30522.376000, 2253.864065, 2253.864065, 0.000000, X, Y) && !ellipse(24576.032400, 29683.705800, 1291.832037, 1291.832037, 0.000000, X, Y) && !ellipse(24754.244040, 25777.578800, 1091.968031, 1091.968031, 0.000000, X, Y) && !ellipse(23309.628000, 25555.842000, 1240.200036, 1240.200036, 0.000000, X, Y) && !ellipse(18141.611496, 31772.360657, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19759.696533, 29327.083984, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24834.104956, 25692.170000, 1109.752032, 1109.752032, 0.000000, X, Y) && !ellipse(23975.558000, 30042.002000, 2583.664074, 2583.664074, 0.000000, X, Y) && !ellipse(22653.788000, 29816.067400, 1289.664037, 1289.664037, 0.000000, X, Y)
[Sun Jul 22 20:25:12 2012] Writing fullrun_mos1_xmm0551060101_pi300-10000_pass1_cl_src40.gif
[Sun Jul 22 20:48:50 2012] Mean detx,y = (-3122.71, 4093.20) 
[Sun Jul 22 20:48:51 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 22 20:49:06 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 22 20:49:06 2012] Setting source spectrum file to fullrun_mos1_xmm0551060101_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Sun Jul 22 20:49:06 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0551060101_pi300-10000_pass1_cl_src40_bgd.pi.gz
[Mon Jul 23 11:54:50 2012] Updating aperture counts using extracted products
[Mon Jul 23 11:54:50 2012] Error reading totcts from fullrun_mos1_xmm0551060101_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Mon Jul 23 11:54:53 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 23 11:54:53 2012] Using photon index=1.80, rate=0.00911, arf fullrun_mos1_xmm0551060101_pi300-10000_pass1_cl_src40.arf
[Mon Jul 23 11:54:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 23 11:54:53 2012] Updating source flux to 9.2e-14
[Mon Jul 23 11:55:13 2012] Flag c found in src. 40 procflags, skipping spectral fitting