[Fri Jul 20 10:35:43 2012] Detection parameters:
  Position = (305.5, 340.9) = 18 56 3.99 1 17 48.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 415.4 +/- 36.2
  Background counts = 378.3
  Rate = 0.008 +/- 0.0007

[Fri Jul 20 10:35:48 2012] Off-axis axis estimate = 3.12'
[Fri Jul 20 22:33:21 2012] Using EEF radius (= 7.99 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 22:33:21 2012] Initial guess for spatial extent in simple fitting = 7.99"
[Fri Jul 20 22:33:21 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.916
[Fri Jul 20 22:33:21 2012] Giving source the simple spatial ID 24 for pass 0, mean size = 7.99"
[Sat Jul 21 04:54:13 2012] fullrun_mos1_xmm0551060101_pi300-10000_cl_pass0_src24.ximg exists
[Sat Jul 21 04:54:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551060101_pi300-10000_cl_pass0_src24.csv
[Sat Jul 21 04:54:13 2012] fullrun_mos1_xmm0551060101_pi300-10000_cl_pass0_src24_1.ximg exists
[Sat Jul 21 04:54:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551060101_pi300-10000_cl_pass0_src24.csv
[Sat Jul 21 04:54:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551060101_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551060101_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 04:54:15 2012] fullrun_mos1_xmm0551060101_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Sat Jul 21 04:54:15 2012] fullrun_mos1_xmm0551060101_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Sat Jul 21 04:54:15 2012] Fit fullrun_mos1_xmm0551060101_pi300-10000_cl_pass0_tfrozen_src24 appears to have run properly
[Sat Jul 21 10:08:27 2012] Spatial fit model total counts = 5517.030000, observed total counts = 5503.000000
[Sat Jul 21 10:08:27 2012] Offset between fit and detection position for source 34 = 0.853308 pixels
[Sat Jul 21 10:08:27 2012] Warning, changing simple spatial fit ID from 24 to 5
[Sat Jul 21 10:08:27 2012] 5157.903000 total counts/ 4442.860000 bgd. counts: snr = 10.727557
Spatial fit parameters:
  Offset between fit and detection position for source 34 = 0.853308 pixels
  Position = (306.2, 340.4) = 18 56 3.78 1 17 40.8
  Extent = 16.4 (16.4-32.8)", rotation angle = 0
  Source counts = 715.0 +/- 71.8
  Background counts = 4442.9
  Rate = 0.01 +/- 0.001
[Sat Jul 21 10:08:28 2012] Vigneting correction estimate = 1.000000
[Sat Jul 21 10:08:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 21 10:08:28 2012] Assessing source extent using major axis lower bound
[Sat Jul 21 10:08:28 2012] Source does appear to be extended
[Sat Jul 21 10:08:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 21 10:08:28 2012] Source is confused with source 4
[Sat Jul 21 18:26:29 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jul 21 18:26:29 2012] Initial guess for spatial extent in simple fitting = 16.42"
[Sat Jul 21 18:26:29 2012] source mask rpix=3.8, npix_max = 73, mask sum = 67, frac = 0.916
[Sat Jul 21 18:26:29 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 16.42"
[Sun Jul 22 02:05:28 2012] fullrun_mos1_xmm0551060101_pi300-10000_cl_pass1_src21.ximg exists
[Sun Jul 22 02:05:28 2012] fullrun_mos1_xmm0551060101_pi300-10000_cl_pass1_src21_1.ximg exists
[Sun Jul 22 02:05:28 2012] Fit fullrun_mos1_xmm0551060101_pi300-10000_cl_pass1_src21 appears to have run properly
[Sun Jul 22 02:05:31 2012] fullrun_mos1_xmm0551060101_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Sun Jul 22 02:05:31 2012] fullrun_mos1_xmm0551060101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Sun Jul 22 02:05:31 2012] Fit fullrun_mos1_xmm0551060101_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Sun Jul 22 10:13:28 2012] Spatial fit model total counts = 5493.190000, observed total counts = 5503.000000
[Sun Jul 22 10:13:28 2012] Offset between fit and detection position for source 34 = 1.208402 pixels
[Sun Jul 22 10:13:28 2012] Warning, changing simple spatial fit ID from 21 to 4
[Sun Jul 22 10:13:28 2012] 4364.926000 total counts/ 3496.390000 bgd. counts: snr = 14.688515
Spatial fit parameters:
  Offset between fit and detection position for source 34 = 1.208402 pixels
  Position = (307.4, 340.4) = 18 56 3.43 1 17 40.8
  Extent = 16.4 (16.4-32.8)", rotation angle = 0
  Source counts = 868.5 +/- 66.1
  Background counts = 3496.4
  Rate = 0.01 +/- 0.0009
[Sun Jul 22 10:13:28 2012] Vigneting correction estimate = 1.000000
[Sun Jul 22 10:13:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 22 10:13:28 2012] Assessing source extent using major axis lower bound
[Sun Jul 22 10:13:28 2012] Source does appear to be extended
[Sun Jul 22 10:13:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 22 20:25:13 2012] XMMSAS src. selection expression = ellipse(26696.306000, 29570.626000, 985.314028, 985.314028, 0.000000, X, Y)
[Sun Jul 22 20:25:13 2012] Writing source region out to fullrun_mos1_xmm0551060101_pi300-10000_pass1_cl_src34_src.reg
[Sun Jul 22 20:25:13 2012] Extracting stamp from image fullrun_mos1_xmm0551060101_pi300-10000_cl_sm2.00.img.gz, (251, 284) - (364, 397)
[Sun Jul 22 20:25:13 2012] XMMSAS bgd. selection expression = annulus(26696.306000, 29570.626000, 1642.190047, 3284.380095, X, Y) && !ellipse(29162.904938, 29246.657837, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26765.512000, 29316.035600, 2561.504074, 2561.504074, 0.000000, X, Y) && !ellipse(26406.870361, 30164.854584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27350.061554, 30301.920471, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28604.524000, 28914.878000, 1338.712039, 1300.200037, 139.094000, X, Y) && !ellipse(26996.449800, 29180.151000, 1256.640036, 1256.640036, 0.000000, X, Y) && !ellipse(24757.227720, 30072.164000, 817.368024, 817.368024, 0.000000, X, Y) && !ellipse(27440.911700, 29424.801240, 1280.752037, 1280.752037, 0.000000, X, Y) && !ellipse(23993.655823, 31145.856049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26425.139618, 30728.525269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26946.231598, 30559.933563, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24629.448000, 29864.182000, 2526.656073, 2526.656073, 0.000000, X, Y) && !ellipse(22749.394928, 26453.556396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24593.498627, 31046.178284, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29575.902710, 29863.806122, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27935.145050, 30298.516724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24944.721832, 31146.721588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28913.961426, 30051.330841, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29939.363800, 29381.539600, 1008.856029, 1008.856029, 0.000000, X, Y) && !ellipse(22552.651947, 27519.306396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26597.326233, 28320.458832, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22824.550842, 31500.214844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22533.908000, 32669.708000, 2970.416085, 2970.416085, 0.000000, X, Y) && !ellipse(24576.032400, 29683.705800, 1291.832037, 1291.832037, 0.000000, X, Y) && !ellipse(24754.244040, 25777.578800, 1091.968031, 1091.968031, 0.000000, X, Y) && !ellipse(23309.628000, 25555.842000, 1240.200036, 1240.200036, 0.000000, X, Y) && !ellipse(30094.240000, 28156.513000, 1333.832038, 1333.832038, 0.000000, X, Y) && !ellipse(26398.957600, 28998.110000, 1173.000034, 1173.000034, 0.000000, X, Y) && !ellipse(24834.104956, 25692.170000, 1109.752032, 1109.752032, 0.000000, X, Y) && !ellipse(29475.861206, 28500.937103, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23975.558000, 30042.002000, 2583.664074, 2583.664074, 0.000000, X, Y) && !ellipse(22653.788000, 29816.067400, 1289.664037, 1289.664037, 0.000000, X, Y)
[Sun Jul 22 20:25:13 2012] Writing fullrun_mos1_xmm0551060101_pi300-10000_pass1_cl_src34.gif
[Sun Jul 22 20:51:02 2012] Mean detx,y = (-5095.41, -1257.87) 
[Sun Jul 22 20:51:03 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 22 20:51:23 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 22 20:51:23 2012] Setting source spectrum file to fullrun_mos1_xmm0551060101_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Sun Jul 22 20:51:23 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0551060101_pi300-10000_pass1_cl_src34_bgd.pi.gz
[Mon Jul 23 11:54:50 2012] Updating aperture counts using extracted products
[Mon Jul 23 11:54:50 2012] Error reading totcts from fullrun_mos1_xmm0551060101_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Mon Jul 23 11:54:53 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 23 11:54:53 2012] Using photon index=1.80, rate=0.0116, arf fullrun_mos1_xmm0551060101_pi300-10000_pass1_cl_src34.arf
[Mon Jul 23 11:54:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 23 11:54:53 2012] Updating source flux to 1.3e-13
[Mon Jul 23 11:55:13 2012] Flag c found in src. 34 procflags, skipping spectral fitting