[Fri Jul 20 10:35:42 2012] Detection parameters:
  Position = (231.9, 358.5) = 18 56 25.32 1 19 2.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 202.2 +/- 25.5
  Background counts = 219.1
  Rate = 0.004 +/- 0.0005

[Fri Jul 20 10:35:48 2012] Off-axis axis estimate = 6.50'
[Fri Jul 20 22:33:21 2012] Using EEF radius (= 9.68 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 22:33:21 2012] Initial guess for spatial extent in simple fitting = 9.68"
[Fri Jul 20 22:33:21 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.010
[Fri Jul 20 22:33:21 2012] Giving source the simple spatial ID 65 for pass 0, mean size = 9.68"
[Sat Jul 21 04:54:14 2012] fullrun_mos1_xmm0551060101_pi300-10000_cl_pass0_src65.ximg exists
[Sat Jul 21 04:54:14 2012] fullrun_mos1_xmm0551060101_pi300-10000_cl_pass0_src65_1.ximg exists
[Sat Jul 21 04:54:14 2012] Fit fullrun_mos1_xmm0551060101_pi300-10000_cl_pass0_src65 appears to have run properly
[Sat Jul 21 04:54:17 2012] fullrun_mos1_xmm0551060101_pi300-10000_cl_pass0_tfrozen_src65.ximg exists
[Sat Jul 21 04:54:17 2012] fullrun_mos1_xmm0551060101_pi300-10000_cl_pass0_tfrozen_src65_1.ximg exists
[Sat Jul 21 04:54:17 2012] Fit fullrun_mos1_xmm0551060101_pi300-10000_cl_pass0_tfrozen_src65 appears to have run properly
[Sat Jul 21 10:08:27 2012] Spatial fit model total counts = 3456.180000, observed total counts = 3182.000000
[Sat Jul 21 10:08:27 2012] Offset between fit and detection position for source 19 = 1.378400 pixels
[Sat Jul 21 10:08:27 2012] Warning, changing simple spatial fit ID from 65 to 40
[Sat Jul 21 10:08:27 2012] 3544.838000 total counts/ 3393.670000 bgd. counts: snr = 2.594927
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 1.378400 pixels
  Position = (232.5, 359.7) = 18 56 25.14 1 19 4.6
  Extent = 19.4 (13.7-38.8)" x 3.9 (2.4-7.6)", rotation angle = 7
  Source counts = 151.2 +/- 59.5
  Background counts = 3393.7
  Rate = 0.002 +/- 0.0008
[Sat Jul 21 10:08:28 2012] Vigneting correction estimate = 1.000000
[Sat Jul 21 10:08:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 21 10:08:28 2012] Assessing source extent using major axis lower bound
[Sat Jul 21 10:08:28 2012] Source does appear to be extended
[Sat Jul 21 10:08:28 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.79
[Sat Jul 21 10:08:28 2012] Source is asymmetric
[Sat Jul 21 10:08:28 2012] Source is confused with source 27
[Sat Jul 21 18:26:29 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jul 21 18:26:29 2012] Initial guess for spatial extent in simple fitting = 11.65"
[Sat Jul 21 18:26:29 2012] source mask rpix=2.7, npix_max = 40, mask sum = 32, frac = 0.792
[Sat Jul 21 18:26:29 2012] Giving source the simple spatial ID 59 for pass 1, mean size = 11.65"
[Sun Jul 22 02:05:29 2012] fullrun_mos1_xmm0551060101_pi300-10000_cl_pass1_src59.ximg exists
[Sun Jul 22 02:05:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551060101_pi300-10000_cl_pass1_src59.csv
[Sun Jul 22 02:05:29 2012] fullrun_mos1_xmm0551060101_pi300-10000_cl_pass1_src59_1.ximg exists
[Sun Jul 22 02:05:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551060101_pi300-10000_cl_pass1_src59.csv
[Sun Jul 22 02:05:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551060101_pi300-10000_cl_pass1_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551060101_pi300-10000_cl_pass1_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 02:05:32 2012] fullrun_mos1_xmm0551060101_pi300-10000_cl_pass1_tfrozen_src59.ximg exists
[Sun Jul 22 02:05:32 2012] fullrun_mos1_xmm0551060101_pi300-10000_cl_pass1_tfrozen_src59_1.ximg exists
[Sun Jul 22 02:05:32 2012] Fit fullrun_mos1_xmm0551060101_pi300-10000_cl_pass1_tfrozen_src59 appears to have run properly
[Sun Jul 22 10:13:28 2012] Spatial fit model total counts = 3458.000000, observed total counts = 3182.000000
[Sun Jul 22 10:13:28 2012] Offset between fit and detection position for source 19 = 0.224427 pixels
[Sun Jul 22 10:13:28 2012] Warning, changing simple spatial fit ID from 59 to 34
[Sun Jul 22 10:13:28 2012] 3533.548000 total counts/ 3389.020000 bgd. counts: snr = 2.482647
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.224427 pixels
  Position = (232.8, 359.7) = 18 56 25.08 1 19 4.4
  Extent = 19.4 (13.8-38.8)" x 3.9 (2.4-7.8)", rotation angle = 8
  Source counts = 144.5 +/- 59.4
  Background counts = 3389.0
  Rate = 0.002 +/- 0.0008
[Sun Jul 22 10:13:28 2012] Vigneting correction estimate = 1.000000
[Sun Jul 22 10:13:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 22 10:13:28 2012] Assessing source extent using major axis lower bound
[Sun Jul 22 10:13:28 2012] Source does appear to be extended
[Sun Jul 22 10:13:28 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.77
[Sun Jul 22 10:13:28 2012] Source is asymmetric
[Sun Jul 22 20:25:15 2012] XMMSAS src. selection expression = ellipse(20201.886000, 31243.578000, 1164.198033, 233.569207, 7.739000, X, Y)
[Sun Jul 22 20:25:15 2012] Writing source region out to fullrun_mos1_xmm0551060101_pi300-10000_pass1_cl_src19_src.reg
[Sun Jul 22 20:25:15 2012] Extracting stamp from image fullrun_mos1_xmm0551060101_pi300-10000_cl_sm2.00.img.gz, (166, 293) - (300, 427)
[Sun Jul 22 20:25:15 2012] XMMSAS bgd. selection expression = annulus(20201.886000, 31243.578000, 1940.330056, 3880.660112, X, Y) && !ellipse(19439.583734, 27216.197800, 657.903219, 657.903219, 0.000000, X, Y) && !ellipse(20306.458664, 27572.858337, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20674.746000, 26445.892000, 1084.440031, 1084.440031, 0.000000, X, Y) && !ellipse(20479.099289, 26910.035583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21463.404000, 27476.180800, 1360.456039, 1360.456039, 0.000000, X, Y) && !ellipse(19946.282700, 27663.771851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21046.824000, 28968.070000, 1371.128039, 1371.128039, 0.000000, X, Y) && !ellipse(24757.227720, 30072.164000, 817.368024, 817.368024, 0.000000, X, Y) && !ellipse(23993.655823, 31145.856049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21462.434525, 28479.293304, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24629.448000, 29864.182000, 2526.656073, 2526.656073, 0.000000, X, Y) && !ellipse(20526.401000, 30214.676000, 1409.104041, 1409.104041, 0.000000, X, Y) && !ellipse(19437.172000, 27094.574000, 1488.640043, 1488.640043, 0.000000, X, Y) && !ellipse(24593.498627, 31046.178284, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24944.721832, 31146.721588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18347.322000, 30148.103200, 1603.912046, 1603.912046, 0.000000, X, Y) && !ellipse(18022.619720, 30547.600952, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21464.760000, 31111.952000, 1485.208043, 1485.208043, 0.000000, X, Y) && !ellipse(20055.367233, 28394.680176, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21872.155991, 31739.541840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22552.651947, 27519.306396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19708.602800, 28779.729600, 1474.592042, 1474.592042, 0.000000, X, Y) && !ellipse(18879.421570, 27936.228302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22824.550842, 31500.214844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18316.238000, 27228.125400, 1513.592044, 1513.592044, 0.000000, X, Y) && !ellipse(19020.909000, 28583.373600, 546.729616, 546.729616, 0.000000, X, Y) && !ellipse(20306.041824, 32316.686798, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16899.037200, 30522.456000, 717.472021, 717.472021, 0.000000, X, Y) && !ellipse(22533.908000, 32669.708000, 2970.416085, 2970.416085, 0.000000, X, Y) && !ellipse(20946.044000, 30861.144000, 1118.400032, 1118.400032, 0.000000, X, Y) && !ellipse(19052.096000, 30522.376000, 2253.864065, 2253.864065, 0.000000, X, Y) && !ellipse(24576.032400, 29683.705800, 1291.832037, 1291.832037, 0.000000, X, Y) && !ellipse(18141.611496, 31772.360657, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19759.696533, 29327.083984, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23975.558000, 30042.002000, 2583.664074, 2583.664074, 0.000000, X, Y) && !ellipse(22653.788000, 29816.067400, 1289.664037, 1289.664037, 0.000000, X, Y)
[Sun Jul 22 20:25:15 2012] Writing fullrun_mos1_xmm0551060101_pi300-10000_pass1_cl_src19.gif
[Sun Jul 22 21:26:03 2012] Mean detx,y = (-5169.16, 5417.04) 
[Sun Jul 22 21:26:04 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 22 21:26:26 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 22 21:26:26 2012] Setting source spectrum file to fullrun_mos1_xmm0551060101_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Sun Jul 22 21:26:26 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0551060101_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Mon Jul 23 11:54:51 2012] Updating aperture counts using extracted products
[Mon Jul 23 11:54:51 2012] Error reading totcts from fullrun_mos1_xmm0551060101_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Mon Jul 23 11:54:55 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 23 11:54:55 2012] Using photon index=1.80, rate=0.00194, arf fullrun_mos1_xmm0551060101_pi300-10000_pass1_cl_src19.arf
[Mon Jul 23 11:54:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 23 11:54:55 2012] Updating source flux to 3.1e-14
[Mon Jul 23 11:55:13 2012] Flag c found in src. 19 procflags, skipping spectral fitting