[Tue Jul  3 19:51:43 2012] Detection parameters:
  Position = (313.3, 267.6) = 13 14 24.36 -25 16 11.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1915.2 +/- 59.0
  Background counts = 239.1
  Rate = 0.05 +/- 0.002

[Tue Jul  3 19:51:44 2012] Off-axis axis estimate = 2.48'
[Tue Jul  3 19:55:11 2012] Using EEF radius (= 7.67 ")to estimate initial spatial extent for simple fitting
[Tue Jul  3 19:55:11 2012] Initial guess for spatial extent in simple fitting = 7.67"
[Tue Jul  3 19:55:11 2012] source mask rpix=1.8, npix_max = 20, mask sum = 25, frac = 1.221
[Tue Jul  3 19:55:11 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 7.67"
[Tue Jul  3 21:18:11 2012] fullrun_pn_xmm0551040101_pi300-10000_cl_pass0_src4.ximg exists
[Tue Jul  3 21:18:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551040101_pi300-10000_cl_pass0_src4.csv
[Tue Jul  3 21:18:11 2012] fullrun_pn_xmm0551040101_pi300-10000_cl_pass0_src4_1.ximg exists
[Tue Jul  3 21:18:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551040101_pi300-10000_cl_pass0_src4.csv
[Tue Jul  3 21:18:11 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551040101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551040101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 21:18:12 2012] fullrun_pn_xmm0551040101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Tue Jul  3 21:18:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551040101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Tue Jul  3 21:18:12 2012] fullrun_pn_xmm0551040101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Tue Jul  3 21:18:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551040101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Tue Jul  3 21:18:12 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551040101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551040101_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 23:59:12 2012] Warning, spatial fit 4 centroid is now closest to src. 2
[Tue Jul  3 23:59:12 2012] Vigneting correction estimate = 1.000000
[Tue Jul  3 23:59:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  3 23:59:12 2012] Assessing source extent using major
[Tue Jul  3 23:59:12 2012] Source does appear to be extended
[Tue Jul  3 23:59:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul  3 23:59:37 2012] Using EEF radius (= 7.67 ")to estimate initial spatial extent for simple fitting
[Tue Jul  3 23:59:37 2012] Initial guess for spatial extent in simple fitting = 7.67"
[Tue Jul  3 23:59:37 2012] source mask rpix=1.8, npix_max = 20, mask sum = 25, frac = 1.221
[Tue Jul  3 23:59:37 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 7.67"
[Wed Jul  4 01:12:24 2012] fullrun_pn_xmm0551040101_pi300-10000_cl_pass1_src4.ximg exists
[Wed Jul  4 01:12:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551040101_pi300-10000_cl_pass1_src4.csv
[Wed Jul  4 01:12:24 2012] fullrun_pn_xmm0551040101_pi300-10000_cl_pass1_src4_1.ximg exists
[Wed Jul  4 01:12:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551040101_pi300-10000_cl_pass1_src4.csv
[Wed Jul  4 01:12:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551040101_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551040101_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul  4 01:12:25 2012] fullrun_pn_xmm0551040101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Wed Jul  4 01:12:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551040101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Wed Jul  4 01:12:25 2012] fullrun_pn_xmm0551040101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Wed Jul  4 01:12:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551040101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Wed Jul  4 01:12:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551040101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551040101_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul  4 03:50:58 2012] Source 4 is offset by 3.949366 and -2.773933 pixels which is larger than
2 X fitted extent = 0.881402 x 0.881402, not incorporating fit results
[Wed Jul  4 03:50:58 2012] Vigneting correction estimate = 1.000000
[Wed Jul  4 03:50:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul  4 03:50:58 2012] Assessing source extent using major
[Wed Jul  4 03:50:58 2012] Source does appear to be extended
[Wed Jul  4 03:50:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul  4 03:51:19 2012] Counts = 1915.197510, rescaling region sizes by 2.000000
[Wed Jul  4 03:51:19 2012] XMMSAS src. selection expression = ellipse(27204.812866, 23234.221863, 1305.000000, 1305.000000, 0.000000, X, Y)
[Wed Jul  4 03:51:19 2012] Writing source region out to fullrun_pn_xmm0551040101_pi300-10000_pass1_cl_src4_src.reg
[Wed Jul  4 03:51:19 2012] Extracting stamp from image fullrun_pn_xmm0551040101_pi300-10000_cl_sm2.00.img.gz, (238, 193) - (388, 343)
[Wed Jul  4 03:51:19 2012] XMMSAS bgd. selection expression = annulus(27204.812866, 23234.221863, 4350.000000, 8700.000000, X, Y) && !ellipse(25997.351800, 23936.630800, 1164.616034, 1164.616034, 0.000000, X, Y) && !ellipse(26676.111572, 23966.205475, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23505.972076, 22310.311493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30106.680237, 16235.255325, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31837.007965, 25257.810852, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28115.017975, 24632.376221, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34647.578640, 32167.019800, 426.302412, 426.302412, 0.000000, X, Y) && !ellipse(20735.022873, 31965.110474, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32925.724284, 30619.653800, 444.172013, 444.172013, 0.000000, X, Y) && !ellipse(22257.734200, 29622.758000, 620.772818, 443.280813, 126.623848, X, Y) && !ellipse(26611.676666, 29031.425232, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27588.589386, 27403.499329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32211.908722, 27341.355713, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27685.527161, 25713.573181, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24900.564380, 25966.230200, 582.620017, 383.443211, 313.976134, X, Y) && !ellipse(25455.048000, 24717.632000, 1101.736032, 1101.736032, 0.000000, X, Y) && !ellipse(27967.026642, 25104.883820, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30825.266571, 24738.096832, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23466.146637, 23865.571899, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20688.273117, 23979.517792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18017.200806, 22781.366791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33554.774750, 22419.836761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25375.718048, 22268.131042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28734.484100, 21483.734497, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27530.627441, 21283.816101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24551.238000, 20861.208000, 1332.584038, 1332.584038, 0.000000, X, Y) && !ellipse(25744.883942, 21604.140076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27827.499542, 20857.960022, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26913.744659, 21103.052414, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25677.093000, 20275.081800, 583.408017, 583.408017, 0.000000, X, Y) && !ellipse(25037.525726, 19583.657471, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23838.169342, 18398.070068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20723.314194, 18300.726074, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23015.242000, 18343.889000, 776.064822, 776.064822, 0.000000, X, Y) && !ellipse(18684.971207, 17748.125534, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20669.925537, 17355.704239, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23359.852000, 17646.584000, 1627.272047, 1627.272047, 0.000000, X, Y) && !ellipse(20244.008392, 17162.898666, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31668.453430, 14658.839645, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35775.664000, 14565.688000, 2011.296058, 2011.296058, 0.000000, X, Y)
[Wed Jul  4 03:51:19 2012] Writing fullrun_pn_xmm0551040101_pi300-10000_pass1_cl_src4.gif
[Wed Jul  4 03:56:45 2012] Mean detx,y = (-1023.28, -1231.00) 
[Wed Jul  4 03:56:50 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul  4 03:58:37 2012] Binned source spectrum to 10 counts/bin
[Wed Jul  4 03:58:38 2012] Setting source spectrum file to fullrun_pn_xmm0551040101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Jul  4 03:58:38 2012] Setting bgd. spectrum file to fullrun_pn_xmm0551040101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Wed Jul  4 06:15:03 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jul  4 06:15:03 2012] rmf not generated due to insufficient counts
[Wed Jul  4 16:54:13 2012] Updating aperture counts using extracted products
[Wed Jul  4 16:54:13 2012] Error reading totcts from fullrun_pn_xmm0551040101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Jul  4 16:54:13 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul  4 16:54:13 2012] Using photon index=1.80, rate=0.0529, arf fullrun_pn_xmm0551040101_pi300-10000_pass1_cl_src4.arf
[Wed Jul  4 16:54:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul  4 16:54:13 2012] Updating source flux to 1.5e-13
[Wed Jul  4 16:58:21 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting