[Tue Jul  3 19:51:43 2012] Detection parameters:
  Position = (299.0, 275.0) = 13 14 28.93 -25 15 42.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2803.0 +/- 72.4
  Background counts = 269.4
  Rate = 0.07 +/- 0.002

[Tue Jul  3 19:51:44 2012] Off-axis axis estimate = 1.70'
[Tue Jul  3 19:55:11 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Tue Jul  3 19:55:11 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Tue Jul  3 19:55:11 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.847
[Tue Jul  3 19:55:11 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Tue Jul  3 21:18:11 2012] fullrun_pn_xmm0551040101_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jul  3 21:18:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551040101_pi300-10000_cl_pass0_src1.csv
[Tue Jul  3 21:18:11 2012] fullrun_pn_xmm0551040101_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jul  3 21:18:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551040101_pi300-10000_cl_pass0_src1.csv
[Tue Jul  3 21:18:11 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551040101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551040101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 21:18:12 2012] fullrun_pn_xmm0551040101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jul  3 21:18:12 2012] fullrun_pn_xmm0551040101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jul  3 21:18:12 2012] Fit fullrun_pn_xmm0551040101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jul  3 23:59:12 2012] Spatial fit model total counts = 14700.900000, observed total counts = 13729.000000
[Tue Jul  3 23:59:12 2012] Offset between fit and detection position for source 1 = 0.803335 pixels
[Tue Jul  3 23:59:12 2012] 14575.439000 total counts/ 13584.200000 bgd. counts: snr = 8.504746
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.803335 pixels
  Position = (299.4, 275.7) = 13 14 28.81 -25 15 39.3
  Extent = 14.6 (14.5-29.1)", rotation angle = 0
  Source counts = 991.2 +/- 120.7
  Background counts = 13584.2
  Rate = 0.02 +/- 0.003
[Tue Jul  3 23:59:12 2012] Vigneting correction estimate = 1.000000
[Tue Jul  3 23:59:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  3 23:59:12 2012] Assessing source extent using major axis lower bound
[Tue Jul  3 23:59:12 2012] Source does appear to be extended
[Tue Jul  3 23:59:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul  3 23:59:12 2012] Source is confused with source 2
[Tue Jul  3 23:59:37 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jul  3 23:59:37 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jul  3 23:59:37 2012] Initial guess for spatial extent in simple fitting = 14.56"
[Tue Jul  3 23:59:37 2012] source mask rpix=3.3, npix_max = 59, mask sum = 56, frac = 0.946
[Tue Jul  3 23:59:37 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 14.56"
[Wed Jul  4 01:12:24 2012] fullrun_pn_xmm0551040101_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jul  4 01:12:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551040101_pi300-10000_cl_pass1_src1.csv
[Wed Jul  4 01:12:24 2012] fullrun_pn_xmm0551040101_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jul  4 01:12:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551040101_pi300-10000_cl_pass1_src1.csv
[Wed Jul  4 01:12:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551040101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551040101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul  4 01:12:25 2012] fullrun_pn_xmm0551040101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jul  4 01:12:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551040101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Wed Jul  4 01:12:25 2012] fullrun_pn_xmm0551040101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jul  4 01:12:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551040101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Wed Jul  4 01:12:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551040101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551040101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul  4 03:50:58 2012] Warning, spatial fit 1 centroid is now closest to src. 2
[Wed Jul  4 03:50:58 2012] Vigneting correction estimate = 1.000000
[Wed Jul  4 03:50:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul  4 03:50:58 2012] Assessing source extent using major axis lower bound
[Wed Jul  4 03:50:58 2012] Source does appear to be extended
[Wed Jul  4 03:50:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul  4 03:51:19 2012] XMMSAS src. selection expression = ellipse(25997.351800, 23936.630800, 873.462025, 873.462025, 0.000000, X, Y)
[Wed Jul  4 03:51:19 2012] Writing source region out to fullrun_pn_xmm0551040101_pi300-10000_pass1_cl_src1_src.reg
[Wed Jul  4 03:51:19 2012] Extracting stamp from image fullrun_pn_xmm0551040101_pi300-10000_cl_sm2.00.img.gz, (249, 225) - (350, 326)
[Wed Jul  4 03:51:19 2012] XMMSAS bgd. selection expression = annulus(25997.351800, 23936.630800, 1455.770042, 2911.540084, X, Y) && !ellipse(26676.111572, 23966.205475, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23505.972076, 22310.311493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27204.812866, 23234.221863, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28115.017975, 24632.376221, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27588.589386, 27403.499329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27685.527161, 25713.573181, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24900.564380, 25966.230200, 582.620017, 383.443211, 313.976134, X, Y) && !ellipse(25455.048000, 24717.632000, 1101.736032, 1101.736032, 0.000000, X, Y) && !ellipse(27967.026642, 25104.883820, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23466.146637, 23865.571899, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25375.718048, 22268.131042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28734.484100, 21483.734497, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27530.627441, 21283.816101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24551.238000, 20861.208000, 1332.584038, 1332.584038, 0.000000, X, Y) && !ellipse(25744.883942, 21604.140076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27827.499542, 20857.960022, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26913.744659, 21103.052414, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jul  4 03:51:19 2012] Writing fullrun_pn_xmm0551040101_pi300-10000_pass1_cl_src1.gif
[Wed Jul  4 03:51:38 2012] Mean detx,y = (-345.78, -345.20) 
[Wed Jul  4 03:51:41 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul  4 03:51:57 2012] Binned source spectrum to 10 counts/bin
[Wed Jul  4 03:51:57 2012] Setting source spectrum file to fullrun_pn_xmm0551040101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jul  4 03:51:57 2012] Setting bgd. spectrum file to fullrun_pn_xmm0551040101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Jul  4 16:54:12 2012] Updating aperture counts using extracted products
[Wed Jul  4 16:54:13 2012] Error reading totcts from fullrun_pn_xmm0551040101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jul  4 16:54:13 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul  4 16:54:13 2012] Using photon index=1.80, rate=0.0226, arf fullrun_pn_xmm0551040101_pi300-10000_pass1_cl_src1.arf
[Wed Jul  4 16:54:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul  4 16:54:13 2012] Updating source flux to 5.3e-14
[Wed Jul  4 16:58:21 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Wed Jul  4 17:00:09 2012] Reading fit data from xmm0551040101/analysis//spectral/fullrun_pn_xmm0551040101_pi300-10000_pass1_cl_src1_pl.csv
[Wed Jul  4 17:00:09 2012] Spectral fit parameter nH value = 1.11402e+21
[Wed Jul  4 17:00:09 2012] Spectral fit parameter PhoIndex value = 1.76046
[Wed Jul  4 17:00:09 2012] Failed to get F(0.3-8.0) from xmm0551040101/analysis//spectral/fullrun_pn_xmm0551040101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Jul  4 17:00:09 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul  4 17:00:09 2012] Using Nh = 1.1e+21, photon index=1.76, rate=0.0226, arf fullrun_pn_xmm0551040101_pi300-10000_pass1_cl_src1.arf
[Wed Jul  4 17:00:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul  4 17:00:09 2012] Updating source flux to 7e-14