[Tue Jul  3 19:52:32 2012] Detection parameters:
  Position = (188.6, 206.0) = 13 15 4.36 -25 20 41.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 467.5 +/- 26.9
  Background counts = 26.4
  Rate = 0.02 +/- 0.0009

[Tue Jul  3 19:52:33 2012] Off-axis axis estimate = 10.41'
[Tue Jul  3 22:44:21 2012] Using EEF radius (= 11.63 ")to estimate initial spatial extent for simple fitting
[Tue Jul  3 22:44:21 2012] Initial guess for spatial extent in simple fitting = 11.63"
[Tue Jul  3 22:44:21 2012] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.042
[Tue Jul  3 22:44:21 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 11.63"
[Tue Jul  3 23:59:01 2012] fullrun_mos2_xmm0551040101_pi300-10000_cl_pass0_src6.ximg exists
[Tue Jul  3 23:59:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551040101_pi300-10000_cl_pass0_src6.csv
[Tue Jul  3 23:59:01 2012] fullrun_mos2_xmm0551040101_pi300-10000_cl_pass0_src6_1.ximg exists
[Tue Jul  3 23:59:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551040101_pi300-10000_cl_pass0_src6.csv
[Tue Jul  3 23:59:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551040101_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551040101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 23:59:01 2012] fullrun_mos2_xmm0551040101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Tue Jul  3 23:59:01 2012] fullrun_mos2_xmm0551040101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Tue Jul  3 23:59:01 2012] Fit fullrun_mos2_xmm0551040101_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Tue Jul  3 23:59:25 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 15.447666 pixels away
[Tue Jul  3 23:59:25 2012] Vigneting correction estimate = 1.000000
[Tue Jul  3 23:59:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  3 23:59:25 2012] Assessing source extent using major
[Tue Jul  3 23:59:25 2012] Source does appear to be extended
[Tue Jul  3 23:59:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul  4 02:38:11 2012] Using EEF radius (= 11.63 ")to estimate initial spatial extent for simple fitting
[Wed Jul  4 02:38:11 2012] Initial guess for spatial extent in simple fitting = 11.63"
[Wed Jul  4 02:38:11 2012] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.042
[Wed Jul  4 02:38:11 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 11.63"
[Wed Jul  4 03:50:50 2012] fullrun_mos2_xmm0551040101_pi300-10000_cl_pass1_src6.ximg exists
[Wed Jul  4 03:50:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551040101_pi300-10000_cl_pass1_src6.csv
[Wed Jul  4 03:50:50 2012] fullrun_mos2_xmm0551040101_pi300-10000_cl_pass1_src6_1.ximg exists
[Wed Jul  4 03:50:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551040101_pi300-10000_cl_pass1_src6.csv
[Wed Jul  4 03:50:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551040101_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551040101_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul  4 03:50:50 2012] fullrun_mos2_xmm0551040101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Wed Jul  4 03:50:50 2012] fullrun_mos2_xmm0551040101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Wed Jul  4 03:50:50 2012] Fit fullrun_mos2_xmm0551040101_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Wed Jul  4 03:51:08 2012] Spatial fit model total counts = 687.367000, observed total counts = 687.000000
[Wed Jul  4 03:51:08 2012] Offset between fit and detection position for source 4 = 0.103528 pixels
[Wed Jul  4 03:51:08 2012] 689.238000 total counts/ 372.441000 bgd. counts: snr = 16.415432
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.103528 pixels
  Position = (188.7, 206.1) = 13 15 4.33 -25 20 42.0
  Extent = 5.6 (4.9-6.3)", rotation angle = 0
  Source counts = 316.8 +/- 26.3
  Background counts = 372.4
  Rate = 0.006 +/- 0.0005
[Wed Jul  4 03:51:08 2012] Vigneting correction estimate = 1.000000
[Wed Jul  4 03:51:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul  4 03:51:08 2012] Assessing source extent using major axis lower bound
[Wed Jul  4 03:51:08 2012] Source does appear to be extended
[Wed Jul  4 03:51:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul  4 15:48:39 2012] XMMSAS src. selection expression = ellipse(16365.836060, 17877.949400, 335.093410, 335.093410, 0.000000, X, Y)
[Wed Jul  4 15:48:39 2012] Writing source region out to fullrun_mos2_xmm0551040101_pi300-10000_pass1_cl_src4_src.reg
[Wed Jul  4 15:48:39 2012] Extracting stamp from image fullrun_mos2_xmm0551040101_pi300-10000_cl_sm2.00.img.gz, (169, 187) - (208, 225)
[Wed Jul  4 15:48:39 2012] XMMSAS bgd. selection expression = annulus(16365.836060, 17877.949400, 558.489016, 1116.978032, X, Y)
[Wed Jul  4 15:48:39 2012] Writing fullrun_mos2_xmm0551040101_pi300-10000_pass1_cl_src4.gif
[Wed Jul  4 15:50:14 2012] Mean detx,y = (-10808.93, 1816.88) 
[Wed Jul  4 15:50:15 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul  4 15:50:22 2012] Binned source spectrum to 10 counts/bin
[Wed Jul  4 15:50:22 2012] Setting source spectrum file to fullrun_mos2_xmm0551040101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Jul  4 15:50:22 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0551040101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Wed Jul  4 16:54:15 2012] Updating aperture counts using extracted products
[Wed Jul  4 16:54:15 2012] Error reading totcts from fullrun_mos2_xmm0551040101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Jul  4 16:54:16 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul  4 16:54:16 2012] Using photon index=1.80, rate=0.00621, arf fullrun_mos2_xmm0551040101_pi300-10000_pass1_cl_src4.arf
[Wed Jul  4 16:54:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul  4 16:54:16 2012] Updating source flux to 1.3e-13