[Tue Jul  3 19:52:07 2012] Detection parameters:
  Position = (188.6, 205.8) = 13 15 4.35 -25 20 43.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 535.4 +/- 29.6
  Background counts = 36.9
  Rate = 0.02 +/- 0.0009

[Tue Jul  3 19:52:08 2012] Off-axis axis estimate = 10.42'
[Tue Jul  3 21:18:13 2012] Using EEF radius (= 11.64 ")to estimate initial spatial extent for simple fitting
[Tue Jul  3 21:18:13 2012] Initial guess for spatial extent in simple fitting = 11.64"
[Tue Jul  3 21:18:13 2012] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.041
[Tue Jul  3 21:18:13 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 11.64"
[Tue Jul  3 22:44:20 2012] fullrun_mos1_xmm0551040101_pi300-10000_cl_pass0_src9.ximg exists
[Tue Jul  3 22:44:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551040101_pi300-10000_cl_pass0_src9.csv
[Tue Jul  3 22:44:20 2012] fullrun_mos1_xmm0551040101_pi300-10000_cl_pass0_src9_1.ximg exists
[Tue Jul  3 22:44:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551040101_pi300-10000_cl_pass0_src9.csv
[Tue Jul  3 22:44:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551040101_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551040101_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 22:44:20 2012] fullrun_mos1_xmm0551040101_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Tue Jul  3 22:44:20 2012] fullrun_mos1_xmm0551040101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Tue Jul  3 22:44:20 2012] Fit fullrun_mos1_xmm0551040101_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Tue Jul  3 23:59:18 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 14.886401 pixels away
[Tue Jul  3 23:59:18 2012] Vigneting correction estimate = 1.000000
[Tue Jul  3 23:59:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  3 23:59:18 2012] Assessing source extent using major
[Tue Jul  3 23:59:18 2012] Source does appear to be extended
[Tue Jul  3 23:59:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul  4 01:12:25 2012] Using EEF radius (= 11.64 ")to estimate initial spatial extent for simple fitting
[Wed Jul  4 01:12:25 2012] Initial guess for spatial extent in simple fitting = 11.64"
[Wed Jul  4 01:12:25 2012] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.041
[Wed Jul  4 01:12:25 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 11.64"
[Wed Jul  4 02:38:10 2012] fullrun_mos1_xmm0551040101_pi300-10000_cl_pass1_src9.ximg exists
[Wed Jul  4 02:38:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551040101_pi300-10000_cl_pass1_src9.csv
[Wed Jul  4 02:38:10 2012] fullrun_mos1_xmm0551040101_pi300-10000_cl_pass1_src9_1.ximg exists
[Wed Jul  4 02:38:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551040101_pi300-10000_cl_pass1_src9.csv
[Wed Jul  4 02:38:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551040101_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551040101_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul  4 02:38:11 2012] fullrun_mos1_xmm0551040101_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Wed Jul  4 02:38:11 2012] fullrun_mos1_xmm0551040101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Wed Jul  4 02:38:11 2012] Fit fullrun_mos1_xmm0551040101_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Wed Jul  4 03:51:03 2012] Spatial fit model total counts = 832.686000, observed total counts = 822.000000
[Wed Jul  4 03:51:03 2012] Offset between fit and detection position for source 8 = 0.120514 pixels
[Wed Jul  4 03:51:03 2012] 836.682000 total counts/ 474.915000 bgd. counts: snr = 16.600494
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.120514 pixels
  Position = (188.6, 205.7) = 13 15 4.34 -25 20 43.7
  Extent = 5.2 (4.7-5.7)", rotation angle = 0
  Source counts = 361.8 +/- 28.9
  Background counts = 474.9
  Rate = 0.007 +/- 0.0006
[Wed Jul  4 03:51:03 2012] Vigneting correction estimate = 1.000000
[Wed Jul  4 03:51:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul  4 03:51:03 2012] Assessing source extent using major axis lower bound
[Wed Jul  4 03:51:03 2012] Source does appear to be extended
[Wed Jul  4 03:51:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul  4 06:54:34 2012] XMMSAS src. selection expression = ellipse(16362.878800, 17843.433800, 309.025809, 309.025809, 0.000000, X, Y)
[Wed Jul  4 06:54:34 2012] Writing source region out to fullrun_mos1_xmm0551040101_pi300-10000_pass1_cl_src8_src.reg
[Wed Jul  4 06:54:34 2012] Extracting stamp from image fullrun_mos1_xmm0551040101_pi300-10000_cl_sm2.00.img.gz, (171, 188) - (206, 223)
[Wed Jul  4 06:54:34 2012] XMMSAS bgd. selection expression = annulus(16362.878800, 17843.433800, 515.043015, 1030.086030, X, Y)
[Wed Jul  4 06:54:34 2012] Writing fullrun_mos1_xmm0551040101_pi300-10000_pass1_cl_src8.gif
[Wed Jul  4 07:16:40 2012] Mean detx,y = (2002.38, 10667.16) 
[Wed Jul  4 07:16:41 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul  4 07:16:46 2012] Binned source spectrum to 10 counts/bin
[Wed Jul  4 07:16:46 2012] Setting source spectrum file to fullrun_mos1_xmm0551040101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Wed Jul  4 07:16:46 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0551040101_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Wed Jul  4 16:54:15 2012] Updating aperture counts using extracted products
[Wed Jul  4 16:54:15 2012] Error reading totcts from fullrun_mos1_xmm0551040101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Wed Jul  4 16:54:15 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul  4 16:54:15 2012] Using photon index=1.80, rate=0.00709, arf fullrun_mos1_xmm0551040101_pi300-10000_pass1_cl_src8.arf
[Wed Jul  4 16:54:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul  4 16:54:15 2012] Updating source flux to 1.4e-13