[Tue Jul  3 19:52:07 2012] Detection parameters:
  Position = (314.0, 260.7) = 13 14 24.11 -25 16 41.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 289.4 +/- 25.2
  Background counts = 78.7
  Rate = 0.006 +/- 0.0006

[Tue Jul  3 19:52:08 2012] Off-axis axis estimate = 2.96'
[Tue Jul  3 21:18:13 2012] Using EEF radius (= 7.91 ")to estimate initial spatial extent for simple fitting
[Tue Jul  3 21:18:13 2012] Initial guess for spatial extent in simple fitting = 7.91"
[Tue Jul  3 21:18:13 2012] source mask rpix=1.8, npix_max = 21, mask sum = 19, frac = 0.884
[Tue Jul  3 21:18:13 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 7.91"
[Tue Jul  3 22:44:20 2012] fullrun_mos1_xmm0551040101_pi300-10000_cl_pass0_src12.ximg exists
[Tue Jul  3 22:44:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551040101_pi300-10000_cl_pass0_src12.csv
[Tue Jul  3 22:44:20 2012] fullrun_mos1_xmm0551040101_pi300-10000_cl_pass0_src12_1.ximg exists
[Tue Jul  3 22:44:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551040101_pi300-10000_cl_pass0_src12.csv
[Tue Jul  3 22:44:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551040101_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551040101_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 22:44:20 2012] fullrun_mos1_xmm0551040101_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Tue Jul  3 22:44:20 2012] fullrun_mos1_xmm0551040101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Tue Jul  3 22:44:20 2012] Fit fullrun_mos1_xmm0551040101_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Tue Jul  3 23:59:18 2012] Warning, spatial fit 12 centroid is now closest to src. 11
[Tue Jul  3 23:59:18 2012] Spatial fit model total counts = 1671.730000, observed total counts = 1651.000000
[Tue Jul  3 23:59:18 2012] Offset between fit and detection position for source 18 = 3.775220 pixels
[Tue Jul  3 23:59:18 2012] Warning, changing simple spatial fit ID from 12 to 34
[Tue Jul  3 23:59:18 2012] 1697.324000 total counts/ 1498.050000 bgd. counts: snr = 5.148580
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 3.775220 pixels
  Position = (310.6, 259.1) = 13 14 25.20 -25 16 51.7
  Extent = 16.1 (15.7-16.3)", rotation angle = 0
  Source counts = 199.3 +/- 41.2
  Background counts = 1498.0
  Rate = 0.004 +/- 0.0008
[Tue Jul  3 23:59:18 2012] Vigneting correction estimate = 1.000000
[Tue Jul  3 23:59:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  3 23:59:18 2012] Assessing source extent using major axis lower bound
[Tue Jul  3 23:59:18 2012] Source does appear to be extended
[Tue Jul  3 23:59:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul  3 23:59:18 2012] Source is confused with source 11
[Tue Jul  3 23:59:18 2012] Source is confused with source 19
[Tue Jul  3 23:59:18 2012] Source is confused with source 46
[Tue Jul  3 23:59:18 2012] Source is confused with source 48
[Wed Jul  4 01:12:25 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jul  4 01:12:25 2012] Initial guess for spatial extent in simple fitting = 16.10"
[Wed Jul  4 01:12:25 2012] source mask rpix=3.7, npix_max = 70, mask sum = 61, frac = 0.864
[Wed Jul  4 01:12:25 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 16.10"
[Wed Jul  4 02:38:10 2012] fullrun_mos1_xmm0551040101_pi300-10000_cl_pass1_src12.ximg exists
[Wed Jul  4 02:38:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551040101_pi300-10000_cl_pass1_src12.csv
[Wed Jul  4 02:38:10 2012] fullrun_mos1_xmm0551040101_pi300-10000_cl_pass1_src12_1.ximg exists
[Wed Jul  4 02:38:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551040101_pi300-10000_cl_pass1_src12.csv
[Wed Jul  4 02:38:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551040101_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551040101_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul  4 02:38:11 2012] fullrun_mos1_xmm0551040101_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Wed Jul  4 02:38:11 2012] fullrun_mos1_xmm0551040101_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Wed Jul  4 02:38:11 2012] Fit fullrun_mos1_xmm0551040101_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Wed Jul  4 03:51:03 2012] Warning, spatial fit 12 centroid is now closest to src. 3
[Wed Jul  4 03:51:03 2012] Spatial fit model total counts = 1672.210000, observed total counts = 1651.000000
[Wed Jul  4 03:51:03 2012] Offset between fit and detection position for source 18 = 0.607344 pixels
[Wed Jul  4 03:51:03 2012] Warning, changing simple spatial fit ID from 12 to 33
[Wed Jul  4 03:51:03 2012] 1646.557000 total counts/ 1452.940000 bgd. counts: snr = 5.079485
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.607344 pixels
  Position = (310.1, 258.7) = 13 14 25.35 -25 16 53.3
  Extent = 16.3 (16.2-16.3)", rotation angle = 0
  Source counts = 193.6 +/- 40.6
  Background counts = 1452.9
  Rate = 0.004 +/- 0.0008
[Wed Jul  4 03:51:03 2012] Vigneting correction estimate = 1.000000
[Wed Jul  4 03:51:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul  4 03:51:03 2012] Assessing source extent using major axis lower bound
[Wed Jul  4 03:51:03 2012] Source does appear to be extended
[Wed Jul  4 03:51:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul  4 06:54:34 2012] XMMSAS src. selection expression = ellipse(26934.155800, 22457.196000, 977.616028, 977.616028, 0.000000, X, Y)
[Wed Jul  4 06:54:34 2012] Writing source region out to fullrun_mos1_xmm0551040101_pi300-10000_pass1_cl_src18_src.reg
[Wed Jul  4 06:54:34 2012] Extracting stamp from image fullrun_mos1_xmm0551040101_pi300-10000_cl_sm2.00.img.gz, (254, 203) - (366, 315)
[Wed Jul  4 06:54:34 2012] XMMSAS bgd. selection expression = annulus(26934.155800, 22457.196000, 1629.360047, 3258.720094, X, Y) && !ellipse(26855.648200, 23816.144000, 2576.288074, 2576.288074, 0.000000, X, Y) && !ellipse(25924.610000, 23708.004000, 2357.104068, 2357.104068, 0.000000, X, Y) && !ellipse(27149.727600, 23651.441200, 1196.832034, 1196.832034, 0.000000, X, Y) && !ellipse(26909.816000, 24154.836000, 2137.040061, 2137.040061, 0.000000, X, Y) && !ellipse(27749.180000, 24626.732000, 1177.080034, 1177.080034, 0.000000, X, Y) && !ellipse(23497.584800, 22202.249200, 392.816011, 392.816011, 0.000000, X, Y) && !ellipse(23168.694000, 18374.473400, 1584.192046, 1584.192046, 0.000000, X, Y) && !ellipse(27251.691240, 23378.188000, 905.424026, 905.424026, 0.000000, X, Y) && !ellipse(27234.586000, 22656.904000, 2643.024076, 2643.024076, 0.000000, X, Y) && !ellipse(24829.339569, 21593.668640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25067.626000, 24261.206000, 781.748022, 781.748022, 0.000000, X, Y) && !ellipse(24547.798000, 25537.340000, 1093.408031, 1093.408031, 354.339000, X, Y) && !ellipse(30809.097443, 24760.797333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24985.986298, 22322.883057, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26202.478241, 22118.340927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26070.666000, 24638.304000, 1086.392031, 1086.392031, 0.000000, X, Y) && !ellipse(26681.892000, 24995.238000, 1068.520031, 1068.520031, 0.000000, X, Y) && !ellipse(24615.330933, 24758.750305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26685.669678, 25697.613800, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26994.547821, 21903.834473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27601.782227, 26085.747223, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28138.646000, 21301.742000, 1321.512038, 1321.512038, 0.000000, X, Y)
[Wed Jul  4 06:54:34 2012] Writing fullrun_mos1_xmm0551040101_pi300-10000_pass1_cl_src18.gif
[Wed Jul  4 07:17:49 2012] Mean detx,y = (1956.73, -924.38) 
[Wed Jul  4 07:17:50 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul  4 07:18:04 2012] Binned source spectrum to 10 counts/bin
[Wed Jul  4 07:18:04 2012] Setting source spectrum file to fullrun_mos1_xmm0551040101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Wed Jul  4 07:18:04 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0551040101_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Wed Jul  4 16:54:15 2012] Updating aperture counts using extracted products
[Wed Jul  4 16:54:15 2012] Error reading totcts from fullrun_mos1_xmm0551040101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Wed Jul  4 16:54:15 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul  4 16:54:15 2012] Using photon index=1.80, rate=0.0038, arf fullrun_mos1_xmm0551040101_pi300-10000_pass1_cl_src18.arf
[Wed Jul  4 16:54:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul  4 16:54:15 2012] Updating source flux to 3.6e-14
[Wed Jul  4 16:54:18 2012] Flag c found in src. 18 procflags, skipping spectral fitting