[Tue Jul 3 19:52:07 2012] Detection parameters: Position = (289.5, 287.3) = 13 14 31.98 -25 14 51.7 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 220.1 +/- 23.2 Background counts = 77.8 Rate = 0.005 +/- 0.0005 [Tue Jul 3 19:52:08 2012] Off-axis axis estimate = 1.04' [Tue Jul 3 21:18:13 2012] Using EEF radius (= 6.95 ")to estimate initial spatial extent for simple fitting [Tue Jul 3 21:18:13 2012] Initial guess for spatial extent in simple fitting = 6.95" [Tue Jul 3 21:18:13 2012] source mask rpix=1.6, npix_max = 17, mask sum = 17, frac = 0.967 [Tue Jul 3 21:18:13 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 6.95" [Tue Jul 3 22:44:20 2012] fullrun_mos1_xmm0551040101_pi300-10000_cl_pass0_src17.ximg exists [Tue Jul 3 22:44:20 2012] fullrun_mos1_xmm0551040101_pi300-10000_cl_pass0_src17_1.ximg exists [Tue Jul 3 22:44:20 2012] Fit fullrun_mos1_xmm0551040101_pi300-10000_cl_pass0_src17 appears to have run properly [Tue Jul 3 22:44:20 2012] fullrun_mos1_xmm0551040101_pi300-10000_cl_pass0_tfrozen_src17.ximg exists [Tue Jul 3 22:44:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551040101_pi300-10000_cl_pass0_tfrozen_src17.csv [Tue Jul 3 22:44:20 2012] fullrun_mos1_xmm0551040101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists [Tue Jul 3 22:44:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551040101_pi300-10000_cl_pass0_tfrozen_src17.csv [Tue Jul 3 22:44:20 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0551040101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0551040101_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Jul 3 23:59:18 2012] Warning, spatial fit 17 centroid is now closest to src. 14 [Tue Jul 3 23:59:18 2012] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 11.552626 pixels away [Tue Jul 3 23:59:18 2012] Vigneting correction estimate = 1.000000 [Tue Jul 3 23:59:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Jul 3 23:59:18 2012] Assessing source extent using major [Tue Jul 3 23:59:18 2012] Source does appear to be extended [Tue Jul 3 23:59:18 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Tue Jul 3 23:59:18 2012] Source is confused with source 39 [Wed Jul 4 01:12:25 2012] Using EEF radius (= 6.95 ")to estimate initial spatial extent for simple fitting [Wed Jul 4 01:12:25 2012] Initial guess for spatial extent in simple fitting = 6.95" [Wed Jul 4 01:12:25 2012] source mask rpix=1.6, npix_max = 17, mask sum = 17, frac = 0.967 [Wed Jul 4 01:12:25 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 6.95" [Wed Jul 4 02:38:10 2012] fullrun_mos1_xmm0551040101_pi300-10000_cl_pass1_src17.ximg exists [Wed Jul 4 02:38:10 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0551040101_pi300-10000_cl_pass1_src17.csv [Wed Jul 4 02:38:10 2012] fullrun_mos1_xmm0551040101_pi300-10000_cl_pass1_src17_1.ximg exists [Wed Jul 4 02:38:10 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0551040101_pi300-10000_cl_pass1_src17.csv [Wed Jul 4 02:38:10 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0551040101_pi300-10000_cl_pass1_src17_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0551040101_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Jul 4 02:38:11 2012] fullrun_mos1_xmm0551040101_pi300-10000_cl_pass1_tfrozen_src17.ximg exists [Wed Jul 4 02:38:11 2012] fullrun_mos1_xmm0551040101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists [Wed Jul 4 02:38:11 2012] Fit fullrun_mos1_xmm0551040101_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly [Wed Jul 4 03:51:03 2012] Spatial fit model total counts = 2036.110000, observed total counts = 1963.000000 [Wed Jul 4 03:51:03 2012] Offset between fit and detection position for source 15 = 6.285998 pixels [Wed Jul 4 03:51:03 2012] 2011.476000 total counts/ 1772.130000 bgd. counts: snr = 5.685627 Spatial fit parameters: Offset between fit and detection position for source 15 = 6.285998 pixels Position = (292.1, 281.6) = 13 14 31.13 -25 15 13.6 Extent = 13.9 (13.9-27.8)", rotation angle = 0 Source counts = 239.3 +/- 44.8 Background counts = 1772.1 Rate = 0.005 +/- 0.0009 [Wed Jul 4 03:51:03 2012] Spatial fit model total counts = 1772.390000, observed total counts = 1709.000000 [Wed Jul 4 03:51:03 2012] Offset between fit and detection position for source 15 = 4.078857 pixels [Wed Jul 4 03:51:03 2012] Warning, changing simple spatial fit ID from 17 to 25 [Wed Jul 4 03:51:03 2012] 1645.991000 total counts/ 1426.270000 bgd. counts: snr = 5.817959 Spatial fit parameters: Offset between fit and detection position for source 15 = 4.078857 pixels Position = (288.7, 279.4) = 13 14 32.23 -25 15 23.1 Extent = 9.8 (7.3-14.3)", rotation angle = 0 Source counts = 219.7 +/- 40.6 Background counts = 1426.3 Rate = 0.004 +/- 0.0008 [Wed Jul 4 03:51:03 2012] Vigneting correction estimate = 1.000000 [Wed Jul 4 03:51:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Jul 4 03:51:03 2012] Assessing source extent using major axis lower bound [Wed Jul 4 03:51:03 2012] Source does appear to be extended [Wed Jul 4 03:51:03 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Jul 4 06:54:35 2012] XMMSAS src. selection expression = ellipse(25067.626000, 24261.206000, 586.311017, 586.311017, 0.000000, X, Y) [Wed Jul 4 06:54:35 2012] Writing source region out to fullrun_mos1_xmm0551040101_pi300-10000_pass1_cl_src15_src.reg [Wed Jul 4 06:54:35 2012] Extracting stamp from image fullrun_mos1_xmm0551040101_pi300-10000_cl_sm2.00.img.gz, (255, 246) - (322, 313) [Wed Jul 4 06:54:35 2012] XMMSAS bgd. selection expression = annulus(25067.626000, 24261.206000, 977.185028, 1954.370056, X, Y) && !ellipse(26855.648200, 23816.144000, 2576.288074, 2576.288074, 0.000000, X, Y) && !ellipse(25924.610000, 23708.004000, 2357.104068, 2357.104068, 0.000000, X, Y) && !ellipse(27149.727600, 23651.441200, 1196.832034, 1196.832034, 0.000000, X, Y) && !ellipse(26909.816000, 24154.836000, 2137.040061, 2137.040061, 0.000000, X, Y) && !ellipse(27749.180000, 24626.732000, 1177.080034, 1177.080034, 0.000000, X, Y) && !ellipse(23497.584800, 22202.249200, 392.816011, 392.816011, 0.000000, X, Y) && !ellipse(27251.691240, 23378.188000, 905.424026, 905.424026, 0.000000, X, Y) && !ellipse(26934.155800, 22457.196000, 1303.488038, 1303.488038, 0.000000, X, Y) && !ellipse(27234.586000, 22656.904000, 2643.024076, 2643.024076, 0.000000, X, Y) && !ellipse(24829.339569, 21593.668640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24547.798000, 25537.340000, 1093.408031, 1093.408031, 354.339000, X, Y) && !ellipse(24985.986298, 22322.883057, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26202.478241, 22118.340927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26070.666000, 24638.304000, 1086.392031, 1086.392031, 0.000000, X, Y) && !ellipse(26681.892000, 24995.238000, 1068.520031, 1068.520031, 0.000000, X, Y) && !ellipse(24615.330933, 24758.750305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26685.669678, 25697.613800, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26994.547821, 21903.834473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27601.782227, 26085.747223, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28138.646000, 21301.742000, 1321.512038, 1321.512038, 0.000000, X, Y) [Wed Jul 4 06:54:35 2012] Writing fullrun_mos1_xmm0551040101_pi300-10000_pass1_cl_src15.gif [Wed Jul 4 07:19:44 2012] Mean detx,y = (-154.73, 78.66) [Wed Jul 4 07:19:45 2012] Setting backscal keywords in source and bgd. spectrum [Wed Jul 4 07:19:52 2012] Binned source spectrum to 10 counts/bin [Wed Jul 4 07:19:52 2012] Setting source spectrum file to fullrun_mos1_xmm0551040101_pi300-10000_pass1_cl_src15_src_b10.pi.gz [Wed Jul 4 07:19:52 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0551040101_pi300-10000_pass1_cl_src15_bgd.pi.gz [Wed Jul 4 16:54:15 2012] Updating aperture counts using extracted products [Wed Jul 4 16:54:15 2012] Error reading totcts from fullrun_mos1_xmm0551040101_pi300-10000_pass1_cl_src15_src_b10.pi.gz [Wed Jul 4 16:54:15 2012] Calculating source flux in energy range 0.30-8.00 [Wed Jul 4 16:54:15 2012] Using photon index=1.80, rate=0.00431, arf fullrun_mos1_xmm0551040101_pi300-10000_pass1_cl_src15.arf [Wed Jul 4 16:54:15 2012] Assuming count rate is from the 0.30-10.00 bandpass [Wed Jul 4 16:54:15 2012] Updating source flux to 4.2e-14 [Wed Jul 4 16:54:18 2012] Flag c found in src. 15 procflags, skipping spectral fitting