[Fri Jun  7 08:16:48 2013] Detection parameters:
  Position = (235.9, 350.9) = 17 13 59.48 -40 9 42.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 100.0 +/- 13.3
  Background counts = 30.2
  Rate = 0.006 +/- 0.0008

[Fri Jun  7 08:16:49 2013] Off-axis axis estimate = 5.92'
[Fri Jun  7 09:35:54 2013] Using EEF radius (= 9.39 ")to estimate initial spatial extent for simple fitting
[Fri Jun  7 09:35:54 2013] Initial guess for spatial extent in simple fitting = 9.39"
[Fri Jun  7 09:35:54 2013] source mask rpix=2.2, npix_max = 28, mask sum = 27, frac = 0.956
[Fri Jun  7 09:35:54 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 9.39"
[Fri Jun  7 09:48:10 2013] fullrun_mos2_xmm0551030101_pi300-10000_cl_pass0_src2.ximg exists
[Fri Jun  7 09:48:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551030101_pi300-10000_cl_pass0_src2.csv
[Fri Jun  7 09:48:10 2013] fullrun_mos2_xmm0551030101_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri Jun  7 09:48:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551030101_pi300-10000_cl_pass0_src2.csv
[Fri Jun  7 09:48:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551030101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551030101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 09:48:10 2013] fullrun_mos2_xmm0551030101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri Jun  7 09:48:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551030101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Fri Jun  7 09:48:10 2013] fullrun_mos2_xmm0551030101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Jun  7 09:48:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551030101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Fri Jun  7 09:48:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551030101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551030101_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 09:48:23 2013] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 10.758123 pixels away
[Fri Jun  7 09:48:23 2013] Vigneting correction estimate = 1.000000
[Fri Jun  7 09:48:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  7 09:48:23 2013] Assessing source extent using major
[Fri Jun  7 09:48:23 2013] Source does appear to be extended
[Fri Jun  7 09:48:23 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  7 10:59:02 2013] Using EEF radius (= 9.39 ")to estimate initial spatial extent for simple fitting
[Fri Jun  7 10:59:02 2013] Initial guess for spatial extent in simple fitting = 9.39"
[Fri Jun  7 10:59:02 2013] source mask rpix=2.2, npix_max = 28, mask sum = 27, frac = 0.956
[Fri Jun  7 10:59:02 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 9.39"
[Fri Jun  7 11:07:02 2013] fullrun_mos2_xmm0551030101_pi300-10000_cl_pass1_src2.ximg exists
[Fri Jun  7 11:07:02 2013] fullrun_mos2_xmm0551030101_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri Jun  7 11:07:02 2013] Fit fullrun_mos2_xmm0551030101_pi300-10000_cl_pass1_src2 appears to have run properly
[Fri Jun  7 11:07:03 2013] fullrun_mos2_xmm0551030101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri Jun  7 11:07:03 2013] fullrun_mos2_xmm0551030101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Jun  7 11:07:03 2013] Fit fullrun_mos2_xmm0551030101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Fri Jun  7 11:07:10 2013] Spatial fit model total counts = 369.208000, observed total counts = 368.000000
[Fri Jun  7 11:07:10 2013] Offset between fit and detection position for source 3 = 0.107917 pixels
[Fri Jun  7 11:07:10 2013] 369.967100 total counts/ 323.536000 bgd. counts: snr = 2.581355
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.107917 pixels
  Position = (236.0, 350.9) = 17 13 59.45 -40 9 42.9
  Extent = 4.3 (3.1-6.3)", rotation angle = 96 (75-122) degrees
  Source counts = 46.4 +/- 19.2
  Background counts = 323.5
  Rate = 0.002 +/- 0.0008
[Fri Jun  7 11:07:10 2013] Vigneting correction estimate = 1.000000
[Fri Jun  7 11:07:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  7 11:07:10 2013] Assessing source extent using major axis lower bound
[Fri Jun  7 11:07:10 2013] Source does appear to be extended
[Fri Jun  7 11:07:10 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.30
[Fri Jun  7 11:38:49 2013] XMMSAS src. selection expression = ellipse(20484.270898, 30481.288200, 260.132407, 140.797204, 95.711962, X, Y)
[Fri Jun  7 11:38:49 2013] Writing source region out to fullrun_mos2_xmm0551030101_pi300-10000_pass1_cl_src3_src.reg
[Fri Jun  7 11:38:49 2013] Extracting stamp from image fullrun_mos2_xmm0551030101_pi300-10000_cl_sm2.00.img.gz, (221, 336) - (251, 366)
[Fri Jun  7 11:38:49 2013] XMMSAS bgd. selection expression = annulus(20484.270898, 30481.288200, 433.554012, 867.108025, X, Y)
[Fri Jun  7 11:38:49 2013] Writing fullrun_mos2_xmm0551030101_pi300-10000_pass1_cl_src3.gif
[Fri Jun  7 11:39:03 2013] Mean detx,y = (5869.15, 3709.35) 
[Fri Jun  7 11:39:04 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  7 11:39:12 2013] Binned source spectrum to 10 counts/bin
[Fri Jun  7 11:39:12 2013] Setting source spectrum file to fullrun_mos2_xmm0551030101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Jun  7 11:39:12 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0551030101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Jun  7 11:40:40 2013] Not generating rmf since there are only 46 counts
[Fri Jun  7 11:40:40 2013] rmf not generated due to insufficient counts
[Fri Jun  7 11:41:48 2013] Updating aperture counts using extracted products
[Fri Jun  7 11:41:49 2013] Total counts from fullrun_mos2_xmm0551030101_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 66.00
[Fri Jun  7 11:41:49 2013] Total counts from fullrun_mos2_xmm0551030101_pi300-10000_pass1_cl_src3_bgd.pi.gz = 271.00
[Fri Jun  7 11:41:49 2013] Got source and background scale factors 113600.000000, 1533432.000000
[Fri Jun  7 11:41:49 2013] User source parameters:
  Position = (236.0, 350.9) = 17 13 59.45 -40 9 42.9
  Extent = 4.3 (3.1-6.3)", rotation angle = 96 (75-122) degrees
  Source aperture counts = 45.9 +/- 9.2
  Background aperture counts = 20.1
  Rate = 0.002 +/- 0.0004

[Fri Jun  7 11:41:49 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun  7 11:41:49 2013] Using photon index=1.80, rate=0.00189, arf fullrun_mos2_xmm0551030101_pi300-10000_pass1_cl_src3.arf
[Fri Jun  7 11:41:49 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  7 11:41:49 2013] Updating source flux to 8.8e-14
[Fri Jun  7 11:41:53 2013] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Jun  7 11:41:54 2013] xmm0551030101/analysis//spectral/fullrun_mos2_xmm0551030101_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete