[Sat Jun 16 19:03:01 2012] Detection parameters:
  Position = (316.9, 311.9) = 18 45 8.56 -63 57 42.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 326.0 +/- 22.3
  Background counts = 16.1
  Rate = 0.02 +/- 0.001

[Sat Jun 16 19:03:01 2012] Off-axis axis estimate = 1.65'
[Sat Jun 16 19:39:14 2012] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Sat Jun 16 19:39:14 2012] Initial guess for spatial extent in simple fitting = 7.26"
[Sat Jun 16 19:39:14 2012] source mask rpix=1.7, npix_max = 18, mask sum = 15, frac = 0.798
[Sat Jun 16 19:39:14 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.26"
[Sat Jun 16 20:00:57 2012] fullrun_mos2_xmm0551022901_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jun 16 20:00:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551022901_pi300-10000_cl_pass0_src1.csv
[Sat Jun 16 20:00:57 2012] fullrun_mos2_xmm0551022901_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jun 16 20:00:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551022901_pi300-10000_cl_pass0_src1.csv
[Sat Jun 16 20:00:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551022901_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551022901_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 20:00:57 2012] fullrun_mos2_xmm0551022901_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jun 16 20:00:57 2012] fullrun_mos2_xmm0551022901_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jun 16 20:00:57 2012] Fit fullrun_mos2_xmm0551022901_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Jun 16 20:01:05 2012] Spatial fit model total counts = 481.083000, observed total counts = 454.000000
[Sat Jun 16 20:01:05 2012] Offset between fit and detection position for source 6 = 0.174635 pixels
[Sat Jun 16 20:01:05 2012] 480.600000 total counts/ 279.952000 bgd. counts: snr = 11.992039
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.174635 pixels
  Position = (316.7, 311.8) = 18 45 8.64 -63 57 42.2
  Extent = 4.3 (3.8-5.0)", rotation angle = 0
  Source counts = 200.6 +/- 21.9
  Background counts = 280.0
  Rate = 0.01 +/- 0.001
[Sat Jun 16 20:01:05 2012] Vigneting correction estimate = 1.000000
[Sat Jun 16 20:01:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 16 20:01:05 2012] Assessing source extent using major axis lower bound
[Sat Jun 16 20:01:05 2012] Source does appear to be extended
[Sat Jun 16 20:01:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 16 20:35:19 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 16 20:35:19 2012] Initial guess for spatial extent in simple fitting = 4.29"
[Sat Jun 16 20:35:19 2012] source mask rpix=1.0, npix_max = 8, mask sum = 8, frac = 0.905
[Sat Jun 16 20:35:19 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 4.29"
[Sat Jun 16 20:53:48 2012] fullrun_mos2_xmm0551022901_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jun 16 20:53:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551022901_pi300-10000_cl_pass1_src1.csv
[Sat Jun 16 20:53:48 2012] fullrun_mos2_xmm0551022901_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jun 16 20:53:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551022901_pi300-10000_cl_pass1_src1.csv
[Sat Jun 16 20:53:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551022901_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551022901_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 20:53:48 2012] fullrun_mos2_xmm0551022901_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jun 16 20:53:48 2012] fullrun_mos2_xmm0551022901_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jun 16 20:53:48 2012] Fit fullrun_mos2_xmm0551022901_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Jun 16 20:53:58 2012] Spatial fit model total counts = 467.305000, observed total counts = 452.000000
[Sat Jun 16 20:53:58 2012] Offset between fit and detection position for source 6 = 0.017963 pixels
[Sat Jun 16 20:53:58 2012] 472.419000 total counts/ 269.473000 bgd. counts: snr = 12.362971
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.017963 pixels
  Position = (316.7, 311.8) = 18 45 8.64 -63 57 42.3
  Extent = 4.3 (3.8-5.0)", rotation angle = 0
  Source counts = 202.9 +/- 21.7
  Background counts = 269.5
  Rate = 0.01 +/- 0.001
[Sat Jun 16 20:53:58 2012] Vigneting correction estimate = 1.000000
[Sat Jun 16 20:53:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 16 20:53:58 2012] Assessing source extent using major axis lower bound
[Sat Jun 16 20:53:58 2012] Source does appear to be extended
[Sat Jun 16 20:53:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 16 21:21:34 2012] XMMSAS src. selection expression = ellipse(27507.565400, 27075.251000, 260.625607, 260.625607, 0.000000, X, Y)
[Sat Jun 16 21:21:34 2012] Writing source region out to fullrun_mos2_xmm0551022901_pi300-10000_pass1_cl_src6_src.reg
[Sat Jun 16 21:21:34 2012] Extracting stamp from image fullrun_mos2_xmm0551022901_pi300-10000_cl_sm2.00.img.gz, (302, 297) - (332, 327)
[Sat Jun 16 21:21:34 2012] XMMSAS bgd. selection expression = annulus(27507.565400, 27075.251000, 434.376012, 868.752025, X, Y)
[Sat Jun 16 21:21:34 2012] Writing fullrun_mos2_xmm0551022901_pi300-10000_pass1_cl_src6.gif
[Sat Jun 16 21:21:37 2012] Mean detx,y = (132.75, 38.14) 
[Sat Jun 16 21:21:37 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 16 21:21:44 2012] Binned source spectrum to 10 counts/bin
[Sat Jun 16 21:21:44 2012] Setting source spectrum file to fullrun_mos2_xmm0551022901_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sat Jun 16 21:21:44 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0551022901_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Sat Jun 16 21:33:51 2012] Updating aperture counts using extracted products
[Sat Jun 16 21:33:51 2012] Error reading totcts from fullrun_mos2_xmm0551022901_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sat Jun 16 21:33:51 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 16 21:33:51 2012] Using photon index=1.80, rate=0.0101, arf fullrun_mos2_xmm0551022901_pi300-10000_pass1_cl_src6.arf
[Sat Jun 16 21:33:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 16 21:33:51 2012] Updating source flux to 1.5e-13
[Sat Jun 16 21:34:26 2012] Reading fit data from xmm0551022901/analysis//spectral/fullrun_mos2_xmm0551022901_pi300-10000_pass1_cl_src6_pl.csv
[Sat Jun 16 21:34:26 2012] Spectral fit parameter nH value = 2.72846e+21
[Sat Jun 16 21:34:26 2012] Spectral fit parameter PhoIndex value = 5.13437
[Sat Jun 16 21:34:26 2012] Failed to get F(0.3-8.0) from xmm0551022901/analysis//spectral/fullrun_mos2_xmm0551022901_pi300-10000_pass1_cl_src6_pl.csv, possibly due to different flux energy range selected
[Sat Jun 16 21:34:26 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 16 21:34:26 2012] Using Nh = 2.7e+21, photon index=5.13, rate=0.0101, arf fullrun_mos2_xmm0551022901_pi300-10000_pass1_cl_src6.arf
[Sat Jun 16 21:34:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 16 21:34:26 2012] Updating source flux to 9.3e-14