[Tue Mar  6 10:12:31 2012] Detection parameters:
  Position = (270.0, 189.2) = 12 49 15.39 -68 35 8.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 19.7 +/- 6.2
  Background counts = 3.8
  Rate = 0.002 +/- 0.0006

[Tue Mar  6 10:12:31 2012] Off-axis axis estimate = 8.18'
[Tue Mar  6 10:32:03 2012] Using EEF radius (= 10.52 ")to estimate initial spatial extent for simple fitting
[Tue Mar  6 10:32:03 2012] Initial guess for spatial extent in simple fitting = 10.52"
[Tue Mar  6 10:32:03 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.057
[Tue Mar  6 10:32:03 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 10.52"
[Tue Mar  6 10:52:46 2012] fullrun_mos1_xmm0551022801_pi300-10000_cl_pass0_src10.ximg exists
[Tue Mar  6 10:52:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551022801_pi300-10000_cl_pass0_src10.csv
[Tue Mar  6 10:52:46 2012] fullrun_mos1_xmm0551022801_pi300-10000_cl_pass0_src10_1.ximg exists
[Tue Mar  6 10:52:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551022801_pi300-10000_cl_pass0_src10.csv
[Tue Mar  6 10:52:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551022801_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551022801_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar  6 10:52:46 2012] fullrun_mos1_xmm0551022801_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Tue Mar  6 10:52:46 2012] fullrun_mos1_xmm0551022801_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Tue Mar  6 10:52:46 2012] Fit fullrun_mos1_xmm0551022801_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Tue Mar  6 11:03:26 2012] Spatial fit model total counts = 74.827800, observed total counts = 72.000000
[Tue Mar  6 11:03:26 2012] Offset between fit and detection position for source 10 = 6.367308 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 6.367308 pixels
  Position = (266.1, 194.3) = 12 49 18.42 -68 34 45.1
  Extent = 16.8 (14.2-19.1)", rotation angle = 0
  Source counts = 71.7 +/- 8.5
  Background counts = 0.0
  Rate = 0.007 +/- 0.0009
 Deleting source due to low signal-to-noise ratio