[Mon Jul 23 17:34:15 2012] Detection parameters:
  Position = (302.5, 321.7) = 11 45 42.25 2 49 16.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 731.2 +/- 33.5
  Background counts = 41.3
  Rate = 0.03 +/- 0.001

[Mon Jul 23 17:34:16 2012] Off-axis axis estimate = 1.71'
[Mon Jul 23 18:10:02 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Mon Jul 23 18:10:02 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Mon Jul 23 18:10:02 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.057
[Mon Jul 23 18:10:02 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Mon Jul 23 18:19:52 2012] fullrun_mos2_xmm0551022701_pi300-10000_cl_pass0_src1.ximg exists
[Mon Jul 23 18:19:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551022701_pi300-10000_cl_pass0_src1.csv
[Mon Jul 23 18:19:52 2012] fullrun_mos2_xmm0551022701_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Jul 23 18:19:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551022701_pi300-10000_cl_pass0_src1.csv
[Mon Jul 23 18:19:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551022701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551022701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 18:19:52 2012] fullrun_mos2_xmm0551022701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Jul 23 18:19:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551022701_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon Jul 23 18:19:52 2012] fullrun_mos2_xmm0551022701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Jul 23 18:19:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551022701_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon Jul 23 18:19:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551022701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551022701_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 18:20:00 2012] Source 2 is offset by 7.163894 and 5.422744 pixels which is larger than
2 X fitted extent = 6.699081 x 6.699081, not incorporating fit results
[Mon Jul 23 18:20:00 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 18:20:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 18:20:00 2012] Assessing source extent using major
[Mon Jul 23 18:20:00 2012] Source does appear to be extended
[Mon Jul 23 18:20:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 18:54:49 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Mon Jul 23 18:54:49 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Mon Jul 23 18:54:49 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.057
[Mon Jul 23 18:54:49 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.29"
[Mon Jul 23 19:02:56 2012] fullrun_mos2_xmm0551022701_pi300-10000_cl_pass1_src1.ximg exists
[Mon Jul 23 19:02:56 2012] fullrun_mos2_xmm0551022701_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Jul 23 19:02:56 2012] Fit fullrun_mos2_xmm0551022701_pi300-10000_cl_pass1_src1 appears to have run properly
[Mon Jul 23 19:02:56 2012] fullrun_mos2_xmm0551022701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Jul 23 19:02:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551022701_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon Jul 23 19:02:56 2012] fullrun_mos2_xmm0551022701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Jul 23 19:02:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551022701_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon Jul 23 19:02:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551022701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551022701_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 19:03:03 2012] Spatial fit model total counts = 601.318000, observed total counts = 577.000000
[Mon Jul 23 19:03:03 2012] Offset between fit and detection position for source 2 = 0.154457 pixels
[Mon Jul 23 19:03:03 2012] 598.640000 total counts/ 206.094000 bgd. counts: snr = 27.343738
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.154457 pixels
  Position = (302.3, 321.7) = 11 45 42.29 2 49 16.3
  Extent = 5.8" x 4.6", rotation angle = 150
  Source counts = 392.5 +/- 24.5
  Background counts = 206.1
  Rate = 0.02 +/- 0.001
[Mon Jul 23 19:03:03 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 19:03:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 19:03:03 2012] Assessing source extent using major
[Mon Jul 23 19:03:03 2012] Source does appear to be extended
[Mon Jul 23 19:03:03 2012] Computing asymmetry using major and minor axis, asym = 1.26
[Mon Jul 23 20:14:17 2012] XMMSAS src. selection expression = ellipse(26253.254441, 27937.022226, 346.022095, 274.184195, 150.277473, X, Y)
[Mon Jul 23 20:14:17 2012] Writing source region out to fullrun_mos2_xmm0551022701_pi300-10000_pass1_cl_src2_src.reg
[Mon Jul 23 20:14:17 2012] Extracting stamp from image fullrun_mos2_xmm0551022701_pi300-10000_cl_sm2.00.img.gz, (282, 302) - (322, 342)
[Mon Jul 23 20:14:17 2012] XMMSAS bgd. selection expression = annulus(26253.254441, 27937.022226, 576.703491, 1153.406983, X, Y)
[Mon Jul 23 20:14:17 2012] Writing fullrun_mos2_xmm0551022701_pi300-10000_pass1_cl_src2.gif
[Mon Jul 23 20:14:19 2012] Mean detx,y = (85.00, 93.89) 
[Mon Jul 23 20:14:19 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 23 20:14:27 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 23 20:14:27 2012] Setting source spectrum file to fullrun_mos2_xmm0551022701_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon Jul 23 20:14:27 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0551022701_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Mon Jul 23 20:24:46 2012] Updating aperture counts using extracted products
[Mon Jul 23 20:24:46 2012] Error reading totcts from fullrun_mos2_xmm0551022701_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon Jul 23 20:24:46 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 23 20:24:46 2012] Using photon index=1.80, rate=0.0212, arf fullrun_mos2_xmm0551022701_pi300-10000_pass1_cl_src2.arf
[Mon Jul 23 20:24:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 23 20:24:46 2012] Updating source flux to 2.7e-13
[Mon Jul 23 20:25:11 2012] Flag b found in src. 2 procflags, skipping spectral fitting
[Mon Jul 23 20:25:44 2012] Reading fit data from xmm0551022701/analysis//spectral/fullrun_mos2_xmm0551022701_pi300-10000_pass1_cl_src2_pl.csv
[Mon Jul 23 20:25:44 2012] Spectral fit parameter nH value = 1.06519e+22
[Mon Jul 23 20:25:44 2012] Spectral fit parameter PhoIndex value = 9.9704
[Mon Jul 23 20:25:44 2012] Failed to get F(0.3-8.0) from xmm0551022701/analysis//spectral/fullrun_mos2_xmm0551022701_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Mon Jul 23 20:25:44 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 23 20:25:44 2012] Using Nh = 1.1e+22, photon index=9.97, rate=0.0212, arf fullrun_mos2_xmm0551022701_pi300-10000_pass1_cl_src2.arf
[Mon Jul 23 20:25:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 23 20:25:44 2012] Updating source flux to 1.5e-13