[Sat Dec 17 02:10:03 2011] Detection parameters:
  Position = (338.6, 154.4) = 10 44 9.69 -33 46 40.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 41.2 +/- 8.8
  Background counts = 6.0
  Rate = 0.003 +/- 0.0006

[Sat Dec 17 02:10:03 2011] Off-axis axis estimate = 10.84'
[Sat Dec 17 02:48:43 2011] Using EEF radius (= 11.85 ")to estimate initial spatial extent for simple fitting
[Sat Dec 17 02:48:43 2011] Initial guess for spatial extent in simple fitting = 11.85"
[Sat Dec 17 02:48:43 2011] source mask rpix=2.7, npix_max = 41, mask sum = 48, frac = 1.154
[Sat Dec 17 02:48:43 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 11.85"
[Sat Dec 17 03:11:58 2011] fullrun_mos2_xmm0551022601_pi300-10000_cl_pass0_src11.ximg exists
[Sat Dec 17 03:11:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551022601_pi300-10000_cl_pass0_src11.csv
[Sat Dec 17 03:11:58 2011] fullrun_mos2_xmm0551022601_pi300-10000_cl_pass0_src11_1.ximg exists
[Sat Dec 17 03:11:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551022601_pi300-10000_cl_pass0_src11.csv
[Sat Dec 17 03:11:58 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551022601_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551022601_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 17 03:11:58 2011] fullrun_mos2_xmm0551022601_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sat Dec 17 03:11:58 2011] fullrun_mos2_xmm0551022601_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sat Dec 17 03:11:58 2011] Fit fullrun_mos2_xmm0551022601_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Sat Dec 17 03:12:12 2011] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 14.250107 pixels away
[Sat Dec 17 03:12:12 2011] Vigneting correction estimate = 1.000000
[Sat Dec 17 03:12:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 17 03:12:12 2011] Assessing source extent using major
[Sat Dec 17 03:12:12 2011] Source does appear to be extended
[Sat Dec 17 03:12:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 17 03:49:16 2011] Using EEF radius (= 11.85 ")to estimate initial spatial extent for simple fitting
[Sat Dec 17 03:49:16 2011] Initial guess for spatial extent in simple fitting = 11.85"
[Sat Dec 17 03:49:16 2011] source mask rpix=2.7, npix_max = 41, mask sum = 48, frac = 1.154
[Sat Dec 17 03:49:16 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 11.85"
[Sat Dec 17 04:09:01 2011] fullrun_mos2_xmm0551022601_pi300-10000_cl_pass1_src11.ximg exists
[Sat Dec 17 04:09:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551022601_pi300-10000_cl_pass1_src11.csv
[Sat Dec 17 04:09:01 2011] fullrun_mos2_xmm0551022601_pi300-10000_cl_pass1_src11_1.ximg exists
[Sat Dec 17 04:09:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551022601_pi300-10000_cl_pass1_src11.csv
[Sat Dec 17 04:09:01 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551022601_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551022601_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 17 04:09:02 2011] fullrun_mos2_xmm0551022601_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sat Dec 17 04:09:02 2011] fullrun_mos2_xmm0551022601_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sat Dec 17 04:09:02 2011] Fit fullrun_mos2_xmm0551022601_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Sat Dec 17 04:09:09 2011] Spatial fit model total counts = 92.131800, observed total counts = 92.000000
[Sat Dec 17 04:09:09 2011] Offset between fit and detection position for source 13 = 0.203835 pixels
[Sat Dec 17 04:09:09 2011] 92.831900 total counts/ 65.260700 bgd. counts: snr = 3.412949
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.203835 pixels
  Position = (338.7, 154.6) = 10 44 9.67 -33 46 38.3
  Extent = 6.6 (4.5-10.2)", rotation angle = 0
  Source counts = 27.6 +/- 9.6
  Background counts = 65.3
  Rate = 0.002 +/- 0.0007
[Sat Dec 17 04:09:09 2011] Vigneting correction estimate = 1.000000
[Sat Dec 17 04:09:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 17 04:09:09 2011] Assessing source extent using major axis lower bound
[Sat Dec 17 04:09:09 2011] Source does appear to be extended
[Sat Dec 17 04:09:09 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 17 04:34:01 2011] XMMSAS src. selection expression = ellipse(29416.759800, 13397.886600, 396.708611, 396.708611, 0.000000, X, Y)
[Sat Dec 17 04:34:01 2011] Writing source region out to fullrun_mos2_xmm0551022601_pi300-10000_pass1_cl_src13_src.reg
[Sat Dec 17 04:34:01 2011] Extracting stamp from image fullrun_mos2_xmm0551022601_pi300-10000_cl_sm2.00.img.gz, (316, 132) - (361, 177)
[Sat Dec 17 04:34:01 2011] XMMSAS bgd. selection expression = annulus(29416.759800, 13397.886600, 661.181019, 1322.362038, X, Y)
[Sat Dec 17 04:34:01 2011] Writing fullrun_mos2_xmm0551022601_pi300-10000_pass1_cl_src13.gif
[Sat Dec 17 04:37:08 2011] Mean detx,y = (880.83, -14627.11) 
[Sat Dec 17 04:37:10 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 17 04:37:26 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 17 04:37:26 2011] Setting source spectrum file to fullrun_mos2_xmm0551022601_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sat Dec 17 04:37:26 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0551022601_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Sat Dec 17 04:38:27 2011] Not generating rmf since there are only 27 counts
[Sat Dec 17 04:38:27 2011] rmf not generated due to insufficient counts
[Sat Dec 17 04:38:51 2011] Updating aperture counts using extracted products
[Sat Dec 17 04:38:51 2011] Error reading totcts from fullrun_mos2_xmm0551022601_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sat Dec 17 04:38:51 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 17 04:38:51 2011] Using photon index=1.80, rate=0.00201, arf fullrun_mos2_xmm0551022601_pi300-10000_pass1_cl_src13.arf
[Sat Dec 17 04:38:51 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 17 04:38:51 2011] Updating source flux to 5.9e-14
[Sat Dec 17 04:38:53 2011] Source 13 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Dec 17 04:38:54 2011] xmm0551022601/analysis//spectral/fullrun_mos2_xmm0551022601_pi300-10000_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete