[Sun Jun 16 05:35:59 2013] Detection parameters:
  Position = (216.1, 347.7) = 13 13 5.84 -2 10 38.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2429.9 +/- 58.9
  Background counts = 11.4
  Rate = 0.4 +/- 0.009

[Sun Jun 16 05:36:00 2013] Off-axis axis estimate = 6.96'
[Sun Jun 16 05:48:30 2013] Using EEF radius (= 9.91 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 05:48:30 2013] Initial guess for spatial extent in simple fitting = 9.91"
[Sun Jun 16 05:48:30 2013] source mask rpix=2.3, npix_max = 30, mask sum = 29, frac = 0.940
[Sun Jun 16 05:48:30 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 9.91"
[Sun Jun 16 05:55:52 2013] fullrun_mos2_xmm0551022001_pi300-10000_cl_pass0_src1.ximg exists
[Sun Jun 16 05:55:52 2013] fullrun_mos2_xmm0551022001_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Jun 16 05:55:52 2013] Fit fullrun_mos2_xmm0551022001_pi300-10000_cl_pass0_src1 appears to have run properly
[Sun Jun 16 05:55:52 2013] fullrun_mos2_xmm0551022001_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Jun 16 05:55:52 2013] fullrun_mos2_xmm0551022001_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Jun 16 05:55:52 2013] Fit fullrun_mos2_xmm0551022001_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Jun 16 05:55:58 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 13.089068 pixels away
[Sun Jun 16 05:55:58 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 05:55:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 05:55:58 2013] Assessing source extent using major
[Sun Jun 16 05:55:58 2013] Source does appear to be extended
[Sun Jun 16 05:55:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 06:03:19 2013] Using EEF radius (= 9.91 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 06:03:19 2013] Initial guess for spatial extent in simple fitting = 9.91"
[Sun Jun 16 06:03:19 2013] source mask rpix=2.3, npix_max = 30, mask sum = 29, frac = 0.940
[Sun Jun 16 06:03:19 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 9.91"
[Sun Jun 16 06:12:08 2013] fullrun_mos2_xmm0551022001_pi300-10000_cl_pass1_src1.ximg exists
[Sun Jun 16 06:12:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551022001_pi300-10000_cl_pass1_src1.csv
[Sun Jun 16 06:12:08 2013] fullrun_mos2_xmm0551022001_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Jun 16 06:12:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551022001_pi300-10000_cl_pass1_src1.csv
[Sun Jun 16 06:12:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551022001_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551022001_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 06:12:08 2013] fullrun_mos2_xmm0551022001_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Jun 16 06:12:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551022001_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun Jun 16 06:12:08 2013] fullrun_mos2_xmm0551022001_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jun 16 06:12:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551022001_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun Jun 16 06:12:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551022001_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551022001_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 06:12:13 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 13.089068 pixels away
[Sun Jun 16 06:12:13 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 06:12:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 06:12:13 2013] Assessing source extent using major
[Sun Jun 16 06:12:13 2013] Source does appear to be extended
[Sun Jun 16 06:12:13 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 06:20:32 2013] Counts = 2429.901855, rescaling region sizes by 2.000000
[Sun Jun 16 06:20:32 2013] XMMSAS src. selection expression = ellipse(18748.099838, 30202.056854, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun Jun 16 06:20:32 2013] Writing source region out to fullrun_mos2_xmm0551022001_pi300-10000_pass1_cl_src1_src.reg
[Sun Jun 16 06:20:32 2013] Extracting stamp from image fullrun_mos2_xmm0551022001_pi300-10000_cl_sm2.00.img.gz, (141, 273) - (291, 423)
[Sun Jun 16 06:20:32 2013] XMMSAS bgd. selection expression = annulus(18748.099838, 30202.056854, 4350.000000, 8700.000000, X, Y) && !ellipse(19586.623000, 27901.615200, 355.927210, 183.703205, 353.985907, X, Y)
[Sun Jun 16 06:20:32 2013] Writing fullrun_mos2_xmm0551022001_pi300-10000_pass1_cl_src1.gif
[Sun Jun 16 06:20:36 2013] Mean detx,y = (-3981.81, -8165.99) 
[Sun Jun 16 06:20:39 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 16 06:24:41 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 16 06:24:41 2013] Setting source spectrum file to fullrun_mos2_xmm0551022001_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jun 16 06:24:41 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0551022001_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Jun 16 06:26:13 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 16 06:26:13 2013] rmf not generated due to insufficient counts
[Sun Jun 16 06:27:10 2013] Updating aperture counts using extracted products
[Sun Jun 16 06:27:10 2013] Total counts from fullrun_mos2_xmm0551022001_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 2578.00
[Sun Jun 16 06:27:10 2013] Total counts from fullrun_mos2_xmm0551022001_pi300-10000_pass1_cl_src1_bgd.pi.gz = 7739.00
[Sun Jun 16 06:27:10 2013] Got source and background scale factors 5060444.000000, 170914655.000000
[Sun Jun 16 06:27:10 2013] User source parameters:
  Position = (216.1, 347.7) = 13 13 5.84 -2 10 38.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 2348.9 +/- 51.8
  Background aperture counts = 229.1
  Rate = 0.3 +/- 0.006

[Sun Jun 16 06:27:10 2013] Updating counts from extracted products
[Sun Jun 16 06:27:10 2013] Set source signif. to 2348.86/15.14 = 155.17
[Sun Jun 16 06:27:11 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 06:27:11 2013] Using photon index=1.80, rate=0.262, arf fullrun_mos2_xmm0551022001_pi300-10000_pass1_cl_src1.arf
[Sun Jun 16 06:27:11 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 06:27:11 2013] Updating source flux to 4.2e-12
[Sun Jun 16 06:27:13 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 06:27:14 2013] xmm0551022001/analysis//spectral/fullrun_mos2_xmm0551022001_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete