[Tue May 21 00:12:04 2013] Detection parameters:
  Position = (202.8, 323.0) = 18 2 57.78 26 21 53.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 153.8 +/- 15.7
  Background counts = 14.7
  Rate = 0.03 +/- 0.003

[Tue May 21 00:12:04 2013] Off-axis axis estimate = 7.16'
[Tue May 21 00:14:10 2013] Using EEF radius (= 10.01 ")to estimate initial spatial extent for simple fitting
[Tue May 21 00:14:10 2013] Initial guess for spatial extent in simple fitting = 10.01"
[Tue May 21 00:14:10 2013] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.956
[Tue May 21 00:14:10 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 10.01"
[Tue May 21 00:34:35 2013] fullrun_pn_xmm0551021901_pi300-10000_cl_pass0_src4.ximg exists
[Tue May 21 00:34:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551021901_pi300-10000_cl_pass0_src4.csv
[Tue May 21 00:34:35 2013] fullrun_pn_xmm0551021901_pi300-10000_cl_pass0_src4_1.ximg exists
[Tue May 21 00:34:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551021901_pi300-10000_cl_pass0_src4.csv
[Tue May 21 00:34:35 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551021901_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551021901_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 00:34:35 2013] fullrun_pn_xmm0551021901_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Tue May 21 00:34:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551021901_pi300-10000_cl_pass0_tfrozen_src4.csv
[Tue May 21 00:34:35 2013] fullrun_pn_xmm0551021901_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Tue May 21 00:34:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551021901_pi300-10000_cl_pass0_tfrozen_src4.csv
[Tue May 21 00:34:35 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551021901_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551021901_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 00:59:56 2013] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 10.290988 pixels away
[Tue May 21 00:59:56 2013] Vigneting correction estimate = 1.000000
[Tue May 21 00:59:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 00:59:56 2013] Assessing source extent using major
[Tue May 21 00:59:56 2013] Source does appear to be extended
[Tue May 21 00:59:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 01:00:10 2013] Using EEF radius (= 10.01 ")to estimate initial spatial extent for simple fitting
[Tue May 21 01:00:10 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May 21 01:00:10 2013] Initial guess for spatial extent in simple fitting = 10.01"
[Tue May 21 01:00:10 2013] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.956
[Tue May 21 01:00:10 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 10.01"
[Tue May 21 01:24:33 2013] fullrun_pn_xmm0551021901_pi300-10000_cl_pass1_src3.ximg exists
[Tue May 21 01:24:33 2013] fullrun_pn_xmm0551021901_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue May 21 01:24:33 2013] Fit fullrun_pn_xmm0551021901_pi300-10000_cl_pass1_src3 appears to have run properly
[Tue May 21 01:24:33 2013] fullrun_pn_xmm0551021901_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue May 21 01:24:33 2013] fullrun_pn_xmm0551021901_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue May 21 01:24:33 2013] Fit fullrun_pn_xmm0551021901_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Tue May 21 01:50:31 2013] Spatial fit model total counts = 308.976000, observed total counts = 289.000000
[Tue May 21 01:50:31 2013] Offset between fit and detection position for source 4 = 0.175945 pixels
[Tue May 21 01:50:31 2013] 312.819000 total counts/ 203.591000 bgd. counts: snr = 7.655167
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.175945 pixels
  Position = (202.6, 322.9) = 18 2 57.83 26 21 52.6
  Extent = 5.5 (4.7-6.8)", rotation angle = 0
  Source counts = 109.2 +/- 17.7
  Background counts = 203.6
  Rate = 0.01 +/- 0.002
[Tue May 21 01:50:31 2013] Vigneting correction estimate = 1.000000
[Tue May 21 01:50:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 01:50:31 2013] Assessing source extent using major axis lower bound
[Tue May 21 01:50:31 2013] Source does appear to be extended
[Tue May 21 01:50:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 01:50:45 2013] XMMSAS src. selection expression = ellipse(17579.524880, 28045.324200, 327.701409, 327.701409, 0.000000, X, Y)
[Tue May 21 01:50:45 2013] Writing source region out to fullrun_pn_xmm0551021901_pi300-10000_pass1_cl_src4_src.reg
[Tue May 21 01:50:45 2013] Extracting stamp from image fullrun_pn_xmm0551021901_pi300-10000_cl_sm2.00.img.gz, (184, 304) - (221, 342)
[Tue May 21 01:50:45 2013] XMMSAS bgd. selection expression = annulus(17579.524880, 28045.324200, 546.169016, 1092.338031, X, Y)
[Tue May 21 01:50:45 2013] Writing fullrun_pn_xmm0551021901_pi300-10000_pass1_cl_src4.gif
[Tue May 21 01:52:41 2013] Mean detx,y = (7252.41, 3705.73) 
[Tue May 21 01:52:46 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 21 01:53:08 2013] Binned source spectrum to 10 counts/bin
[Tue May 21 01:53:09 2013] Setting source spectrum file to fullrun_pn_xmm0551021901_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Tue May 21 01:53:09 2013] Setting bgd. spectrum file to fullrun_pn_xmm0551021901_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Tue May 21 02:33:03 2013] Updating aperture counts using extracted products
[Tue May 21 02:33:03 2013] Total counts from fullrun_pn_xmm0551021901_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 138.00
[Tue May 21 02:33:03 2013] Total counts from fullrun_pn_xmm0551021901_pi300-10000_pass1_cl_src4_bgd.pi.gz = 182.00
[Tue May 21 02:33:03 2013] Got source and background scale factors 336000.000000, 2468333.000000
[Tue May 21 02:33:03 2013] User source parameters:
  Position = (202.6, 322.9) = 18 2 57.83 26 21 52.6
  Extent = 5.5 (4.7-6.8)", rotation angle = 0
  Source aperture counts = 113.2 +/- 12.8
  Background aperture counts = 24.8
  Rate = 0.01 +/- 0.002

[Tue May 21 02:33:06 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 21 02:33:06 2013] Using photon index=1.80, rate=0.014, arf fullrun_pn_xmm0551021901_pi300-10000_pass1_cl_src4.arf
[Tue May 21 02:33:06 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 21 02:33:06 2013] Updating source flux to 9.2e-14
[Tue May 21 02:33:18 2013] xmm0551021901/analysis//spectral/fullrun_pn_xmm0551021901_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete