[Mon May 13 12:03:27 2013] Detection parameters:
  Position = (207.8, 190.6) = 19 42 42.07 50 22 15.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 90.1 +/- 12.9
  Background counts = 10.7
  Rate = 0.007 +/- 0.001

[Mon May 13 12:03:28 2013] Off-axis axis estimate = 10.21'
[Mon May 13 12:05:33 2013] Using EEF radius (= 11.53 ")to estimate initial spatial extent for simple fitting
[Mon May 13 12:05:33 2013] Initial guess for spatial extent in simple fitting = 11.53"
[Mon May 13 12:05:33 2013] source mask rpix=2.7, npix_max = 39, mask sum = 42, frac = 1.057
[Mon May 13 12:05:33 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 11.53"
[Mon May 13 12:29:46 2013] fullrun_pn_xmm0551021701_pi300-10000_cl_pass0_src6.ximg exists
[Mon May 13 12:29:46 2013] fullrun_pn_xmm0551021701_pi300-10000_cl_pass0_src6_1.ximg exists
[Mon May 13 12:29:46 2013] Fit fullrun_pn_xmm0551021701_pi300-10000_cl_pass0_src6 appears to have run properly
[Mon May 13 12:29:46 2013] fullrun_pn_xmm0551021701_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Mon May 13 12:29:46 2013] fullrun_pn_xmm0551021701_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Mon May 13 12:29:46 2013] Fit fullrun_pn_xmm0551021701_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Mon May 13 12:59:41 2013] Source 6 is offset by -8.488925 and -4.675174 pixels which is larger than
2 X fitted extent = 1.352363 x 1.352363, not incorporating fit results
[Mon May 13 12:59:41 2013] Warning, spatial fit 6 centroid is now closest to src. 3
[Mon May 13 12:59:41 2013] Vigneting correction estimate = 1.000000
[Mon May 13 12:59:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 12:59:41 2013] Assessing source extent using major
[Mon May 13 12:59:41 2013] Source does appear to be extended
[Mon May 13 12:59:41 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 12:59:41 2013] Source is confused with source 3
[Mon May 13 12:59:52 2013] Using EEF radius (= 11.53 ")to estimate initial spatial extent for simple fitting
[Mon May 13 12:59:52 2013] Initial guess for spatial extent in simple fitting = 11.53"
[Mon May 13 12:59:52 2013] source mask rpix=2.7, npix_max = 39, mask sum = 42, frac = 1.057
[Mon May 13 12:59:52 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 11.53"
[Mon May 13 13:21:08 2013] fullrun_pn_xmm0551021701_pi300-10000_cl_pass1_src6.ximg exists
[Mon May 13 13:21:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551021701_pi300-10000_cl_pass1_src6.csv
[Mon May 13 13:21:08 2013] fullrun_pn_xmm0551021701_pi300-10000_cl_pass1_src6_1.ximg exists
[Mon May 13 13:21:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551021701_pi300-10000_cl_pass1_src6.csv
[Mon May 13 13:21:08 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551021701_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551021701_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 13:21:08 2013] fullrun_pn_xmm0551021701_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Mon May 13 13:21:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551021701_pi300-10000_cl_pass1_tfrozen_src6.csv
[Mon May 13 13:21:08 2013] fullrun_pn_xmm0551021701_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Mon May 13 13:21:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551021701_pi300-10000_cl_pass1_tfrozen_src6.csv
[Mon May 13 13:21:08 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551021701_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551021701_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 13:54:45 2013] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 11.299253 pixels away
[Mon May 13 13:54:45 2013] Vigneting correction estimate = 1.000000
[Mon May 13 13:54:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 13:54:45 2013] Assessing source extent using major
[Mon May 13 13:54:45 2013] Source does appear to be extended
[Mon May 13 13:54:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 13:54:55 2013] XMMSAS src. selection expression = ellipse(18032.707504, 16537.503860, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 13 13:54:55 2013] Writing source region out to fullrun_pn_xmm0551021701_pi300-10000_pass1_cl_src6_src.reg
[Mon May 13 13:54:55 2013] Extracting stamp from image fullrun_pn_xmm0551021701_pi300-10000_cl_sm2.00.img.gz, (170, 153) - (245, 228)
[Mon May 13 13:54:55 2013] XMMSAS bgd. selection expression = annulus(18032.707504, 16537.503860, 1087.500000, 2175.000000, X, Y) && !ellipse(17895.880000, 15922.216600, 571.516816, 298.928009, 45.107500, X, Y)
[Mon May 13 13:54:55 2013] Writing fullrun_pn_xmm0551021701_pi300-10000_pass1_cl_src6.gif
[Mon May 13 13:57:09 2013] Mean detx,y = (-4620.65, 13508.15) 
[Mon May 13 13:57:10 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 13 13:57:25 2013] Binned source spectrum to 10 counts/bin
[Mon May 13 13:57:25 2013] Setting source spectrum file to fullrun_pn_xmm0551021701_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Mon May 13 13:57:25 2013] Setting bgd. spectrum file to fullrun_pn_xmm0551021701_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Mon May 13 14:10:53 2013] Not generating rmf since there are only 90 counts
[Mon May 13 14:10:53 2013] rmf not generated due to insufficient counts
[Mon May 13 14:23:03 2013] Updating aperture counts using extracted products
[Mon May 13 14:23:03 2013] Total counts from fullrun_pn_xmm0551021701_pi300-10000_pass1_cl_src6_src_b10.pi.gz = 434.00
[Mon May 13 14:23:03 2013] Total counts from fullrun_pn_xmm0551021701_pi300-10000_pass1_cl_src6_bgd.pi.gz = 519.00
[Mon May 13 14:23:03 2013] Got source and background scale factors 1340800.000000, 6338886.000000
[Mon May 13 14:23:03 2013] User source parameters:
  Position = (207.8, 190.6) = 19 42 42.07 50 22 15.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 324.2 +/- 21.9
  Background aperture counts = 109.8
  Rate = 0.03 +/- 0.002

[Mon May 13 14:23:03 2013] Updating counts from extracted products
[Mon May 13 14:23:03 2013] Set source signif. to 324.22/10.48 = 30.94
[Mon May 13 14:23:06 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 13 14:23:06 2013] Using photon index=1.80, rate=0.0262, arf fullrun_pn_xmm0551021701_pi300-10000_pass1_cl_src6.arf
[Mon May 13 14:23:06 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 13 14:23:06 2013] Updating source flux to 2.5e-13
[Mon May 13 14:23:13 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 13 14:23:15 2013] xmm0551021701/analysis//spectral/fullrun_pn_xmm0551021701_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete