[Mon May 13 12:03:27 2013] Detection parameters:
  Position = (328.4, 439.6) = 19 41 47.18 50 40 21.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 36.0 +/- 9.0
  Background counts = 14.2
  Rate = 0.003 +/- 0.0007

[Mon May 13 12:03:28 2013] Off-axis axis estimate = 10.46'
[Mon May 13 12:05:33 2013] Using EEF radius (= 11.66 ")to estimate initial spatial extent for simple fitting
[Mon May 13 12:05:33 2013] Initial guess for spatial extent in simple fitting = 11.66"
[Mon May 13 12:05:33 2013] source mask rpix=2.7, npix_max = 40, mask sum = 49, frac = 1.211
[Mon May 13 12:05:33 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 11.66"
[Mon May 13 12:29:46 2013] fullrun_pn_xmm0551021701_pi300-10000_cl_pass0_src11.ximg exists
[Mon May 13 12:29:46 2013] fullrun_pn_xmm0551021701_pi300-10000_cl_pass0_src11_1.ximg exists
[Mon May 13 12:29:46 2013] Fit fullrun_pn_xmm0551021701_pi300-10000_cl_pass0_src11 appears to have run properly
[Mon May 13 12:29:46 2013] fullrun_pn_xmm0551021701_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Mon May 13 12:29:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551021701_pi300-10000_cl_pass0_tfrozen_src11.csv
[Mon May 13 12:29:46 2013] fullrun_pn_xmm0551021701_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Mon May 13 12:29:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551021701_pi300-10000_cl_pass0_tfrozen_src11.csv
[Mon May 13 12:29:46 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551021701_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551021701_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 12:59:41 2013] Spatial fit model total counts = 161.922000, observed total counts = 148.000000
[Mon May 13 12:59:41 2013] Offset between fit and detection position for source 11 = 1.606879 pixels
[Mon May 13 12:59:41 2013] 157.356000 total counts/ 100.607000 bgd. counts: snr = 5.657755
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 1.606879 pixels
  Position = (329.7, 440.6) = 19 41 46.58 50 40 24.4
  Extent = 16.5 (7.0-23.3)" x 7.0 (4.6-13.1)", rotation angle = 146
  Source counts = 56.7 +/- 12.5
  Background counts = 100.6
  Rate = 0.005 +/- 0.001
[Mon May 13 12:59:41 2013] Vigneting correction estimate = 1.000000
[Mon May 13 12:59:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 12:59:41 2013] Assessing source extent using major axis lower bound
[Mon May 13 12:59:41 2013] Source does appear to be extended
[Mon May 13 12:59:41 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.53
[Mon May 13 12:59:52 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 13 12:59:52 2013] Initial guess for spatial extent in simple fitting = 11.76"
[Mon May 13 12:59:52 2013] source mask rpix=2.7, npix_max = 41, mask sum = 47, frac = 1.146
[Mon May 13 12:59:52 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 11.76"
[Mon May 13 13:21:08 2013] fullrun_pn_xmm0551021701_pi300-10000_cl_pass1_src11.ximg exists
[Mon May 13 13:21:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551021701_pi300-10000_cl_pass1_src11.csv
[Mon May 13 13:21:08 2013] fullrun_pn_xmm0551021701_pi300-10000_cl_pass1_src11_1.ximg exists
[Mon May 13 13:21:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551021701_pi300-10000_cl_pass1_src11.csv
[Mon May 13 13:21:08 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551021701_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551021701_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 13:21:08 2013] fullrun_pn_xmm0551021701_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Mon May 13 13:21:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551021701_pi300-10000_cl_pass1_tfrozen_src11.csv
[Mon May 13 13:21:08 2013] fullrun_pn_xmm0551021701_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Mon May 13 13:21:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551021701_pi300-10000_cl_pass1_tfrozen_src11.csv
[Mon May 13 13:21:08 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551021701_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551021701_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 13:54:45 2013] Warning, spatial fit 11 centroid is now closest to src. 7
[Mon May 13 13:54:45 2013] Vigneting correction estimate = 1.000000
[Mon May 13 13:54:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 13:54:45 2013] Assessing source extent using major axis lower bound
[Mon May 13 13:54:45 2013] Source does appear to be extended
[Mon May 13 13:54:45 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.53
[Mon May 13 13:54:55 2013] XMMSAS src. selection expression = ellipse(28632.523000, 38279.662600, 988.380028, 422.386212, 146.274096, X, Y)
[Mon May 13 13:54:55 2013] Writing source region out to fullrun_pn_xmm0551021701_pi300-10000_pass1_cl_src11_src.reg
[Mon May 13 13:54:55 2013] Extracting stamp from image fullrun_pn_xmm0551021701_pi300-10000_cl_sm2.00.img.gz, (273, 384) - (386, 497)
[Mon May 13 13:54:55 2013] XMMSAS bgd. selection expression = annulus(28632.523000, 38279.662600, 1647.300047, 3294.600095, X, Y) && !ellipse(29562.154968, 35281.465088, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31615.717580, 39154.743200, 767.656022, 260.896008, 348.183751, X, Y)
[Mon May 13 13:54:55 2013] Writing fullrun_pn_xmm0551021701_pi300-10000_pass1_cl_src11.gif
[Mon May 13 13:59:35 2013] Mean detx,y = (-3484.17, -10939.91) 
[Mon May 13 13:59:37 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 13 14:00:12 2013] Binned source spectrum to 10 counts/bin
[Mon May 13 14:00:13 2013] Setting source spectrum file to fullrun_pn_xmm0551021701_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Mon May 13 14:00:13 2013] Setting bgd. spectrum file to fullrun_pn_xmm0551021701_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Mon May 13 14:11:33 2013] Not generating rmf since there are only 56 counts
[Mon May 13 14:11:33 2013] rmf not generated due to insufficient counts
[Mon May 13 14:23:04 2013] Updating aperture counts using extracted products
[Mon May 13 14:23:04 2013] Total counts from fullrun_pn_xmm0551021701_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 102.00
[Mon May 13 14:23:04 2013] Total counts from fullrun_pn_xmm0551021701_pi300-10000_pass1_cl_src11_bgd.pi.gz = 1433.00
[Mon May 13 14:23:04 2013] Got source and background scale factors 1022069.000000, 19811427.000000
[Mon May 13 14:23:04 2013] User source parameters:
  Position = (329.7, 440.6) = 19 41 46.58 50 40 24.4
  Extent = 16.5 (7.0-23.3)" x 7.0 (4.6-13.1)", rotation angle = 146
  Source aperture counts = 28.1 +/- 11.1
  Background aperture counts = 73.9
  Rate = 0.002 +/- 0.0009

[Mon May 13 14:23:06 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 13 14:23:06 2013] Using photon index=1.80, rate=0.00458, arf fullrun_pn_xmm0551021701_pi300-10000_pass1_cl_src11.arf
[Mon May 13 14:23:06 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 13 14:23:06 2013] Updating source flux to 4.1e-14
[Mon May 13 14:23:13 2013] Source 11 has fewer than 100.000000 counts, skipping spectral fitting
[Mon May 13 14:23:15 2013] xmm0551021701/analysis//spectral/fullrun_pn_xmm0551021701_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete