[Mon May 13 12:04:09 2013] Detection parameters:
  Position = (206.9, 190.7) = 19 42 42.49 50 22 18.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 38.6 +/- 8.5
  Background counts = 4.5
  Rate = 0.003 +/- 0.0006

[Mon May 13 12:04:10 2013] Off-axis axis estimate = 10.25'
[Mon May 13 12:42:35 2013] Using EEF radius (= 11.55 ")to estimate initial spatial extent for simple fitting
[Mon May 13 12:42:35 2013] Initial guess for spatial extent in simple fitting = 11.55"
[Mon May 13 12:42:35 2013] source mask rpix=2.7, npix_max = 39, mask sum = 36, frac = 0.903
[Mon May 13 12:42:35 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 11.55"
[Mon May 13 12:59:37 2013] fullrun_mos2_xmm0551021701_pi300-10000_cl_pass0_src11.ximg exists
[Mon May 13 12:59:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551021701_pi300-10000_cl_pass0_src11.csv
[Mon May 13 12:59:37 2013] fullrun_mos2_xmm0551021701_pi300-10000_cl_pass0_src11_1.ximg exists
[Mon May 13 12:59:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551021701_pi300-10000_cl_pass0_src11.csv
[Mon May 13 12:59:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551021701_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551021701_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 12:59:37 2013] fullrun_mos2_xmm0551021701_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Mon May 13 12:59:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551021701_pi300-10000_cl_pass0_tfrozen_src11.csv
[Mon May 13 12:59:37 2013] fullrun_mos2_xmm0551021701_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Mon May 13 12:59:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551021701_pi300-10000_cl_pass0_tfrozen_src11.csv
[Mon May 13 12:59:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551021701_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551021701_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 12:59:45 2013] Spatial fit model total counts = 215.585000, observed total counts = 245.000000
[Mon May 13 12:59:45 2013] Poor agreement between spatial fit and data for source 8
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 13 12:59:45 2013] Vigneting correction estimate = 1.000000
[Mon May 13 12:59:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 12:59:45 2013] Assessing source extent using major
[Mon May 13 12:59:45 2013] Source does appear to be extended
[Mon May 13 12:59:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 12:59:45 2013] Source is confused with source 1
[Mon May 13 13:34:45 2013] Using EEF radius (= 11.55 ")to estimate initial spatial extent for simple fitting
[Mon May 13 13:34:45 2013] Initial guess for spatial extent in simple fitting = 11.55"
[Mon May 13 13:34:45 2013] source mask rpix=2.7, npix_max = 39, mask sum = 36, frac = 0.903
[Mon May 13 13:34:45 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 11.55"
[Mon May 13 13:54:41 2013] fullrun_mos2_xmm0551021701_pi300-10000_cl_pass1_src11.ximg exists
[Mon May 13 13:54:41 2013] fullrun_mos2_xmm0551021701_pi300-10000_cl_pass1_src11_1.ximg exists
[Mon May 13 13:54:41 2013] Fit fullrun_mos2_xmm0551021701_pi300-10000_cl_pass1_src11 appears to have run properly
[Mon May 13 13:54:41 2013] fullrun_mos2_xmm0551021701_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Mon May 13 13:54:41 2013] fullrun_mos2_xmm0551021701_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Mon May 13 13:54:41 2013] Fit fullrun_mos2_xmm0551021701_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Mon May 13 13:54:49 2013] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 12.821394 pixels away
[Mon May 13 13:54:49 2013] Vigneting correction estimate = 1.000000
[Mon May 13 13:54:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 13:54:49 2013] Assessing source extent using major
[Mon May 13 13:54:49 2013] Source does appear to be extended
[Mon May 13 13:54:49 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 14:18:21 2013] XMMSAS src. selection expression = ellipse(17950.900742, 16540.134995, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 13 14:18:21 2013] Writing source region out to fullrun_mos2_xmm0551021701_pi300-10000_pass1_cl_src8_src.reg
[Mon May 13 14:18:21 2013] Extracting stamp from image fullrun_mos2_xmm0551021701_pi300-10000_cl_sm2.00.img.gz, (169, 153) - (244, 228)
[Mon May 13 14:18:21 2013] XMMSAS bgd. selection expression = annulus(17950.900742, 16540.134995, 1087.500000, 2175.000000, X, Y) && !ellipse(17858.635818, 15959.910202, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 13 14:18:21 2013] Writing fullrun_mos2_xmm0551021701_pi300-10000_pass1_cl_src8.gif
[Mon May 13 14:21:03 2013] Mean detx,y = (4682.86, -13745.75) 
[Mon May 13 14:21:04 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 13 14:21:13 2013] Binned source spectrum to 10 counts/bin
[Mon May 13 14:21:13 2013] Setting source spectrum file to fullrun_mos2_xmm0551021701_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Mon May 13 14:21:13 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0551021701_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Mon May 13 14:22:29 2013] Not generating rmf since there are only 38 counts
[Mon May 13 14:22:29 2013] rmf not generated due to insufficient counts
[Mon May 13 14:23:09 2013] Updating aperture counts using extracted products
[Mon May 13 14:23:09 2013] Total counts from fullrun_mos2_xmm0551021701_pi300-10000_pass1_cl_src8_src_b10.pi.gz = 212.00
[Mon May 13 14:23:09 2013] Total counts from fullrun_mos2_xmm0551021701_pi300-10000_pass1_cl_src8_bgd.pi.gz = 224.00
[Mon May 13 14:23:09 2013] Got source and background scale factors 1347200.000000, 10157260.000000
[Mon May 13 14:23:09 2013] User source parameters:
  Position = (206.9, 190.7) = 19 42 42.49 50 22 18.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 182.3 +/- 15.6
  Background aperture counts = 29.7
  Rate = 0.01 +/- 0.001

[Mon May 13 14:23:09 2013] Updating counts from extracted products
[Mon May 13 14:23:09 2013] Set source signif. to 182.29/5.45 = 33.44
[Mon May 13 14:23:10 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 13 14:23:10 2013] Using photon index=1.80, rate=0.0137, arf fullrun_mos2_xmm0551021701_pi300-10000_pass1_cl_src8.arf
[Mon May 13 14:23:10 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 13 14:23:10 2013] Updating source flux to 4e-13
[Mon May 13 14:23:12 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 13 14:23:13 2013] xmm0551021701/analysis//spectral/fullrun_mos2_xmm0551021701_pi300-10000_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete