[Thu May 24 16:01:17 2012] Detection parameters:
  Position = (312.4, 279.1) = 17 2 36.50 47 5 0.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 120.9 +/- 17.1
  Background counts = 50.0
  Rate = 0.01 +/- 0.002

[Thu May 24 16:01:17 2012] Off-axis axis estimate = 1.73'
[Thu May 24 16:02:54 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Thu May 24 16:02:54 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Thu May 24 16:02:54 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.055
[Thu May 24 16:02:54 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.29"
[Thu May 24 16:10:41 2012] fullrun_pn_xmm0551021301_pi300-10000_cl_pass0_src3.ximg exists
[Thu May 24 16:10:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551021301_pi300-10000_cl_pass0_src3.csv
[Thu May 24 16:10:41 2012] fullrun_pn_xmm0551021301_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu May 24 16:10:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551021301_pi300-10000_cl_pass0_src3.csv
[Thu May 24 16:10:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551021301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551021301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 16:10:41 2012] fullrun_pn_xmm0551021301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu May 24 16:10:41 2012] fullrun_pn_xmm0551021301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu May 24 16:10:41 2012] Fit fullrun_pn_xmm0551021301_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Thu May 24 16:23:29 2012] Source 4 is offset by 4.904933 and 4.902948 pixels which is larger than
2 X fitted extent = 0.924818 x 0.924818, not incorporating fit results
[Thu May 24 16:23:29 2012] Vigneting correction estimate = 1.000000
[Thu May 24 16:23:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 16:23:29 2012] Assessing source extent using major
[Thu May 24 16:23:29 2012] Source does appear to be extended
[Thu May 24 16:23:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 16:23:35 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Thu May 24 16:23:35 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Thu May 24 16:23:35 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.055
[Thu May 24 16:23:35 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 7.29"
[Thu May 24 16:29:36 2012] fullrun_pn_xmm0551021301_pi300-10000_cl_pass1_src3.ximg exists
[Thu May 24 16:29:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551021301_pi300-10000_cl_pass1_src3.csv
[Thu May 24 16:29:36 2012] fullrun_pn_xmm0551021301_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu May 24 16:29:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551021301_pi300-10000_cl_pass1_src3.csv
[Thu May 24 16:29:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551021301_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551021301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 16:29:36 2012] fullrun_pn_xmm0551021301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu May 24 16:29:36 2012] fullrun_pn_xmm0551021301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu May 24 16:29:36 2012] Fit fullrun_pn_xmm0551021301_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Thu May 24 16:41:40 2012] Spatial fit model total counts = 216.162000, observed total counts = 216.000000
[Thu May 24 16:41:40 2012] Offset between fit and detection position for source 4 = 0.829870 pixels
[Thu May 24 16:41:40 2012] 213.633900 total counts/ 164.121000 bgd. counts: snr = 3.864882
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.829870 pixels
  Position = (312.4, 279.9) = 17 2 36.53 47 5 4.4
  Extent = 7.4 (4.6-10.6)", rotation angle = 0
  Source counts = 49.5 +/- 14.6
  Background counts = 164.1
  Rate = 0.01 +/- 0.004
[Thu May 24 16:41:40 2012] Vigneting correction estimate = 1.000000
[Thu May 24 16:41:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 16:41:40 2012] Assessing source extent using major axis lower bound
[Thu May 24 16:41:40 2012] Source does appear to be extended
[Thu May 24 16:41:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 16:41:46 2012] XMMSAS src. selection expression = ellipse(27126.513200, 24305.599300, 445.506613, 445.506613, 0.000000, X, Y)
[Thu May 24 16:41:46 2012] Writing source region out to fullrun_pn_xmm0551021301_pi300-10000_pass1_cl_src4_src.reg
[Thu May 24 16:41:46 2012] Extracting stamp from image fullrun_pn_xmm0551021301_pi300-10000_cl_sm2.00.img.gz, (287, 254) - (338, 306)
[Thu May 24 16:41:46 2012] XMMSAS bgd. selection expression = annulus(27126.513200, 24305.599300, 742.511021, 1485.022043, X, Y)
[Thu May 24 16:41:46 2012] Writing fullrun_pn_xmm0551021301_pi300-10000_pass1_cl_src4.gif
[Thu May 24 16:44:15 2012] Mean detx,y = (89.82, -199.85) 
[Thu May 24 16:44:17 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 24 16:44:38 2012] Binned source spectrum to 10 counts/bin
[Thu May 24 16:44:39 2012] Setting source spectrum file to fullrun_pn_xmm0551021301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Thu May 24 16:44:39 2012] Setting bgd. spectrum file to fullrun_pn_xmm0551021301_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Thu May 24 16:49:11 2012] Not generating rmf since there are only 49 counts
[Thu May 24 16:49:11 2012] rmf not generated due to insufficient counts
[Thu May 24 17:03:45 2012] Updating aperture counts using extracted products
[Thu May 24 17:03:45 2012] Error reading totcts from fullrun_pn_xmm0551021301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Thu May 24 17:03:45 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 24 17:03:45 2012] Using photon index=1.80, rate=0.0126, arf fullrun_pn_xmm0551021301_pi300-10000_pass1_cl_src4.arf
[Thu May 24 17:03:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 24 17:03:46 2012] Updating source flux to 4.5e-14
[Thu May 24 17:04:29 2012] Flag b found in src. 4 procflags, skipping spectral fitting
[Thu May 24 17:04:29 2012] Source 4 has fewer than 100.000000 counts, skipping spectral fitting