[Sun Aug 19 23:13:43 2012] Detection parameters:
  Position = (429.5, 170.8) = 22 56 41.43 20 37 58.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 51.4 +/- 11.0
  Background counts = 12.8
  Rate = 0.0009 +/- 0.0002

[Sun Aug 19 23:13:43 2012] Off-axis axis estimate = 13.26'
[Mon Aug 20 02:21:12 2012] Using EEF radius (= 13.06 ")to estimate initial spatial extent for simple fitting
[Mon Aug 20 02:21:12 2012] Initial guess for spatial extent in simple fitting = 13.06"
[Mon Aug 20 02:21:12 2012] source mask rpix=3.0, npix_max = 49, mask sum = 44, frac = 0.897
[Mon Aug 20 02:21:12 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 13.06"
[Mon Aug 20 04:10:13 2012] fullrun_mos2_xmm0551020901_pi300-10000_cl_pass0_src29.ximg exists
[Mon Aug 20 04:10:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551020901_pi300-10000_cl_pass0_src29.csv
[Mon Aug 20 04:10:13 2012] fullrun_mos2_xmm0551020901_pi300-10000_cl_pass0_src29_1.ximg exists
[Mon Aug 20 04:10:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551020901_pi300-10000_cl_pass0_src29.csv
[Mon Aug 20 04:10:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551020901_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551020901_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 04:10:14 2012] fullrun_mos2_xmm0551020901_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Mon Aug 20 04:10:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551020901_pi300-10000_cl_pass0_tfrozen_src29.csv
[Mon Aug 20 04:10:14 2012] fullrun_mos2_xmm0551020901_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Mon Aug 20 04:10:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551020901_pi300-10000_cl_pass0_tfrozen_src29.csv
[Mon Aug 20 04:10:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551020901_pi300-10000_cl_pass0_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551020901_pi300-10000_cl_pass0_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 04:10:46 2012] Spatial fit model total counts = 276.908000, observed total counts = 229.000000
[Mon Aug 20 04:10:46 2012] Poor agreement between spatial fit and data for source 32
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Aug 20 04:10:46 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 04:10:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 04:10:46 2012] Assessing source extent using major
[Mon Aug 20 04:10:46 2012] Source does appear to be extended
[Mon Aug 20 04:10:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 20 06:50:59 2012] Using EEF radius (= 13.06 ")to estimate initial spatial extent for simple fitting
[Mon Aug 20 06:50:59 2012] Initial guess for spatial extent in simple fitting = 13.06"
[Mon Aug 20 06:50:59 2012] source mask rpix=3.0, npix_max = 49, mask sum = 44, frac = 0.897
[Mon Aug 20 06:50:59 2012] Giving source the simple spatial ID 28 for pass 1, mean size = 13.06"
[Mon Aug 20 08:29:31 2012] fullrun_mos2_xmm0551020901_pi300-10000_cl_pass1_src28.ximg exists
[Mon Aug 20 08:29:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551020901_pi300-10000_cl_pass1_src28.csv
[Mon Aug 20 08:29:31 2012] fullrun_mos2_xmm0551020901_pi300-10000_cl_pass1_src28_1.ximg exists
[Mon Aug 20 08:29:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551020901_pi300-10000_cl_pass1_src28.csv
[Mon Aug 20 08:29:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551020901_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551020901_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 08:29:31 2012] fullrun_mos2_xmm0551020901_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Mon Aug 20 08:29:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551020901_pi300-10000_cl_pass1_tfrozen_src28.csv
[Mon Aug 20 08:29:31 2012] fullrun_mos2_xmm0551020901_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Mon Aug 20 08:29:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551020901_pi300-10000_cl_pass1_tfrozen_src28.csv
[Mon Aug 20 08:29:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551020901_pi300-10000_cl_pass1_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551020901_pi300-10000_cl_pass1_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 08:30:03 2012] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 32 at 16.784002 pixels away
[Mon Aug 20 08:30:03 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 08:30:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 08:30:03 2012] Assessing source extent using major
[Mon Aug 20 08:30:03 2012] Source does appear to be extended
[Mon Aug 20 08:30:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 20 10:22:18 2012] XMMSAS src. selection expression = ellipse(37316.505219, 14811.826416, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Aug 20 10:22:18 2012] Writing source region out to fullrun_mos2_xmm0551020901_pi300-10000_pass1_cl_src32_src.reg
[Mon Aug 20 10:22:18 2012] Extracting stamp from image fullrun_mos2_xmm0551020901_pi300-10000_cl_sm2.00.img.gz, (392, 133) - (467, 208)
[Mon Aug 20 10:22:18 2012] XMMSAS bgd. selection expression = annulus(37316.505219, 14811.826416, 1087.500000, 2175.000000, X, Y)
[Mon Aug 20 10:22:18 2012] Writing fullrun_mos2_xmm0551020901_pi300-10000_pass1_cl_src32.gif
[Mon Aug 20 10:35:19 2012] Mean detx,y = (15637.73, 4895.10) 
[Mon Aug 20 10:35:22 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Aug 20 10:35:47 2012] Binned source spectrum to 10 counts/bin
[Mon Aug 20 10:35:47 2012] Setting source spectrum file to fullrun_mos2_xmm0551020901_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Mon Aug 20 10:35:47 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0551020901_pi300-10000_pass1_cl_src32_bgd.pi.gz
[Mon Aug 20 11:04:52 2012] Not generating rmf since there are only 51 counts
[Mon Aug 20 11:04:52 2012] rmf not generated due to insufficient counts
[Mon Aug 20 11:07:16 2012] Updating aperture counts using extracted products
[Mon Aug 20 11:07:16 2012] Error reading totcts from fullrun_mos2_xmm0551020901_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Mon Aug 20 11:07:18 2012] Calculating source flux in energy range 0.30-8.00
[Mon Aug 20 11:07:18 2012] Using photon index=1.80, rate=0.000934, arf fullrun_mos2_xmm0551020901_pi300-10000_pass1_cl_src32.arf
[Mon Aug 20 11:07:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Aug 20 11:07:18 2012] Updating source flux to 4.2e-14
[Mon Aug 20 11:09:09 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting