[Sun Aug 19 23:13:42 2012] Detection parameters:
  Position = (154.9, 408.6) = 22 58 6.61 20 55 11.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 279.0 +/- 20.4
  Background counts = 21.2
  Rate = 0.005 +/- 0.0004

[Sun Aug 19 23:13:43 2012] Off-axis axis estimate = 13.12'
[Mon Aug 20 02:21:12 2012] Using EEF radius (= 12.99 ")to estimate initial spatial extent for simple fitting
[Mon Aug 20 02:21:12 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Aug 20 02:21:12 2012] Initial guess for spatial extent in simple fitting = 12.99"
[Mon Aug 20 02:21:12 2012] source mask rpix=3.0, npix_max = 48, mask sum = 47, frac = 0.967
[Mon Aug 20 02:21:12 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.99"
[Mon Aug 20 04:10:13 2012] fullrun_mos2_xmm0551020901_pi300-10000_cl_pass0_src1.ximg exists
[Mon Aug 20 04:10:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551020901_pi300-10000_cl_pass0_src1.csv
[Mon Aug 20 04:10:13 2012] fullrun_mos2_xmm0551020901_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Aug 20 04:10:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551020901_pi300-10000_cl_pass0_src1.csv
[Mon Aug 20 04:10:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551020901_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551020901_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 04:10:13 2012] fullrun_mos2_xmm0551020901_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Aug 20 04:10:13 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0551020901_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon Aug 20 04:10:13 2012] fullrun_mos2_xmm0551020901_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Aug 20 04:10:13 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0551020901_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon Aug 20 04:10:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551020901_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551020901_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 04:10:46 2012] Warning, spatial fit 1 centroid is now closest to src. 12
[Mon Aug 20 04:10:46 2012] Source 1 is offset by -4.309316 and 3.995860 pixels which is larger than
2 X fitted extent = 3.510699 x 3.510699, not incorporating fit results
[Mon Aug 20 04:10:46 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 04:10:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 04:10:46 2012] Assessing source extent using major
[Mon Aug 20 04:10:46 2012] Source does appear to be extended
[Mon Aug 20 04:10:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 20 04:10:46 2012] Source is confused with source 8
[Mon Aug 20 06:50:59 2012] Using EEF radius (= 12.99 ")to estimate initial spatial extent for simple fitting
[Mon Aug 20 06:50:59 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Aug 20 06:50:59 2012] Initial guess for spatial extent in simple fitting = 12.99"
[Mon Aug 20 06:50:59 2012] source mask rpix=3.0, npix_max = 48, mask sum = 47, frac = 0.967
[Mon Aug 20 06:50:59 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 12.99"
[Mon Aug 20 08:29:30 2012] fullrun_mos2_xmm0551020901_pi300-10000_cl_pass1_src1.ximg exists
[Mon Aug 20 08:29:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551020901_pi300-10000_cl_pass1_src1.csv
[Mon Aug 20 08:29:30 2012] fullrun_mos2_xmm0551020901_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Aug 20 08:29:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551020901_pi300-10000_cl_pass1_src1.csv
[Mon Aug 20 08:29:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551020901_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551020901_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 08:29:31 2012] fullrun_mos2_xmm0551020901_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Aug 20 08:29:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551020901_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon Aug 20 08:29:31 2012] fullrun_mos2_xmm0551020901_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Aug 20 08:29:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551020901_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon Aug 20 08:29:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551020901_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551020901_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 08:30:03 2012] Warning, spatial fit 1 centroid is now closest to src. 14
[Mon Aug 20 08:30:03 2012] Spatial fit model total counts = 994.801000, observed total counts = 966.000000
[Mon Aug 20 08:30:03 2012] Offset between fit and detection position for source 1 = 0.237529 pixels
[Mon Aug 20 08:30:03 2012] Warning, changing simple spatial fit ID from 1 to 15
[Mon Aug 20 08:30:03 2012] 941.598400 total counts/ 858.062000 bgd. counts: snr = 2.851783
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.237529 pixels
  Position = (154.9, 408.8) = 22 58 6.61 20 55 10.1
  Extent = 4.1 (3.0-5.7)", rotation angle = 0
  Source counts = 83.5 +/- 30.7
  Background counts = 858.1
  Rate = 0.002 +/- 0.0006
[Mon Aug 20 08:30:03 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 08:30:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 08:30:03 2012] Assessing source extent using major axis lower bound
[Mon Aug 20 08:30:03 2012] Source does appear to be extended
[Mon Aug 20 08:30:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 20 10:22:17 2012] XMMSAS src. selection expression = ellipse(13425.402000, 35516.260000, 247.093207, 247.093207, 0.000000, X, Y)
[Mon Aug 20 10:22:17 2012] Writing source region out to fullrun_mos2_xmm0551020901_pi300-10000_pass1_cl_src1_src.reg
[Mon Aug 20 10:22:17 2012] Extracting stamp from image fullrun_mos2_xmm0551020901_pi300-10000_cl_sm2.00.img.gz, (141, 395) - (169, 423)
[Mon Aug 20 10:22:17 2012] XMMSAS bgd. selection expression = annulus(13425.402000, 35516.260000, 411.822012, 823.644024, X, Y) && !ellipse(13055.270000, 35725.642000, 2095.104060, 2095.104060, 0.000000, X, Y) && !ellipse(12366.363892, 35545.274109, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13220.154000, 34977.102000, 612.728018, 612.728018, 0.000000, X, Y) && !ellipse(13471.997742, 34150.486328, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12580.668564, 34753.870941, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13022.376495, 34339.142090, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Aug 20 10:22:17 2012] Writing fullrun_mos2_xmm0551020901_pi300-10000_pass1_cl_src1.gif
[Mon Aug 20 10:22:23 2012] Mean detx,y = (-13833.30, -6376.53) 
[Mon Aug 20 10:22:25 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Aug 20 10:22:41 2012] Binned source spectrum to 10 counts/bin
[Mon Aug 20 10:22:41 2012] Setting source spectrum file to fullrun_mos2_xmm0551020901_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Aug 20 10:22:41 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0551020901_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Aug 20 10:37:42 2012] Not generating rmf since there are only 83 counts
[Mon Aug 20 10:37:42 2012] rmf not generated due to insufficient counts
[Mon Aug 20 11:07:14 2012] Updating aperture counts using extracted products
[Mon Aug 20 11:07:14 2012] Error reading totcts from fullrun_mos2_xmm0551020901_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Aug 20 11:07:16 2012] Calculating source flux in energy range 0.30-8.00
[Mon Aug 20 11:07:16 2012] Using photon index=1.80, rate=0.00152, arf fullrun_mos2_xmm0551020901_pi300-10000_pass1_cl_src1.arf
[Mon Aug 20 11:07:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Aug 20 11:07:16 2012] Updating source flux to 6.5e-14
[Mon Aug 20 11:09:09 2012] Flag b found in src. 1 procflags, skipping spectral fitting
[Mon Aug 20 11:09:09 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Mon Aug 20 11:09:09 2012] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Aug 20 11:09:48 2012] xmm0551020901/analysis//spectral/fullrun_mos2_xmm0551020901_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete