[Wed May 15 01:12:51 2013] Detection parameters: Position = (175.5, 238.1) = 8 53 18.01 28 13 49.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 210.9 +/- 20.3 Background counts = 27.7 Rate = 0.02 +/- 0.002 [Wed May 15 01:12:51 2013] Off-axis axis estimate = 9.93' [Wed May 15 01:15:45 2013] Using EEF radius (= 11.39 ")to estimate initial spatial extent for simple fitting [Wed May 15 01:15:45 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Wed May 15 01:15:45 2013] Initial guess for spatial extent in simple fitting = 11.39" [Wed May 15 01:15:45 2013] source mask rpix=2.6, npix_max = 38, mask sum = 23, frac = 0.591 [Wed May 15 01:15:45 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 11.39" [Wed May 15 01:38:36 2013] fullrun_pn_xmm0551020801_pi300-10000_cl_pass0_src1.ximg exists [Wed May 15 01:38:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551020801_pi300-10000_cl_pass0_src1.csv [Wed May 15 01:38:36 2013] fullrun_pn_xmm0551020801_pi300-10000_cl_pass0_src1_1.ximg exists [Wed May 15 01:38:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551020801_pi300-10000_cl_pass0_src1.csv [Wed May 15 01:38:36 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0551020801_pi300-10000_cl_pass0_src1_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0551020801_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 15 01:38:36 2013] fullrun_pn_xmm0551020801_pi300-10000_cl_pass0_tfrozen_src1.ximg exists [Wed May 15 01:38:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551020801_pi300-10000_cl_pass0_tfrozen_src1.csv [Wed May 15 01:38:36 2013] fullrun_pn_xmm0551020801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists [Wed May 15 01:38:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551020801_pi300-10000_cl_pass0_tfrozen_src1.csv [Wed May 15 01:38:36 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0551020801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0551020801_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 15 02:11:24 2013] Spatial fit model total counts = 734.186000, observed total counts = 585.000000 [Wed May 15 02:11:24 2013] Poor agreement between spatial fit and data for source 1 It may help to tweak spatial fit manually Not incorporating fit results [Wed May 15 02:11:24 2013] Vigneting correction estimate = 1.000000 [Wed May 15 02:11:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 15 02:11:24 2013] Assessing source extent using major [Wed May 15 02:11:24 2013] Source does appear to be extended [Wed May 15 02:11:24 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 15 02:11:38 2013] Using EEF radius (= 11.39 ")to estimate initial spatial extent for simple fitting [Wed May 15 02:11:38 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Wed May 15 02:11:38 2013] Initial guess for spatial extent in simple fitting = 11.39" [Wed May 15 02:11:38 2013] source mask rpix=2.6, npix_max = 38, mask sum = 23, frac = 0.591 [Wed May 15 02:11:38 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 11.39" [Wed May 15 02:36:51 2013] fullrun_pn_xmm0551020801_pi300-10000_cl_pass1_src1.ximg exists [Wed May 15 02:36:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551020801_pi300-10000_cl_pass1_src1.csv [Wed May 15 02:36:51 2013] fullrun_pn_xmm0551020801_pi300-10000_cl_pass1_src1_1.ximg exists [Wed May 15 02:36:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551020801_pi300-10000_cl_pass1_src1.csv [Wed May 15 02:36:51 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0551020801_pi300-10000_cl_pass1_src1_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0551020801_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 15 02:36:51 2013] fullrun_pn_xmm0551020801_pi300-10000_cl_pass1_tfrozen_src1.ximg exists [Wed May 15 02:36:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551020801_pi300-10000_cl_pass1_tfrozen_src1.csv [Wed May 15 02:36:51 2013] fullrun_pn_xmm0551020801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists [Wed May 15 02:36:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551020801_pi300-10000_cl_pass1_tfrozen_src1.csv [Wed May 15 02:36:51 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0551020801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0551020801_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 15 03:13:10 2013] Spatial fit model total counts = 734.330000, observed total counts = 585.000000 [Wed May 15 03:13:10 2013] Poor agreement between spatial fit and data for source 1 It may help to tweak spatial fit manually Not incorporating fit results [Wed May 15 03:13:10 2013] Vigneting correction estimate = 1.000000 [Wed May 15 03:13:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 15 03:13:10 2013] Assessing source extent using major [Wed May 15 03:13:10 2013] Source does appear to be extended [Wed May 15 03:13:10 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 15 03:13:26 2013] XMMSAS src. selection expression = ellipse(15220.000000, 20667.140411, 652.500000, 652.500000, 0.000000, X, Y) [Wed May 15 03:13:26 2013] Writing source region out to fullrun_pn_xmm0551020801_pi300-10000_pass1_cl_src1_src.reg [Wed May 15 03:13:26 2013] Extracting stamp from image fullrun_pn_xmm0551020801_pi300-10000_cl_sm2.00.img.gz, (138, 201) - (213, 276) [Wed May 15 03:13:26 2013] XMMSAS bgd. selection expression = annulus(15220.000000, 20667.140411, 1087.500000, 2175.000000, X, Y) [Wed May 15 03:13:26 2013] Writing fullrun_pn_xmm0551020801_pi300-10000_pass1_cl_src1.gif [Wed May 15 03:13:38 2013] Mean detx,y = (-12823.19, 2889.40) [Wed May 15 03:13:44 2013] Setting backscal keywords in source and bgd. spectrum [Wed May 15 03:14:39 2013] Binned source spectrum to 10 counts/bin [Wed May 15 03:14:40 2013] Setting source spectrum file to fullrun_pn_xmm0551020801_pi300-10000_pass1_cl_src1_src_b10.pi.gz [Wed May 15 03:14:40 2013] Setting bgd. spectrum file to fullrun_pn_xmm0551020801_pi300-10000_pass1_cl_src1_bgd.pi.gz [Wed May 15 03:28:17 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Wed May 15 03:28:17 2013] rmf not generated due to insufficient counts [Wed May 15 03:57:12 2013] Updating aperture counts using extracted products [Wed May 15 03:57:12 2013] Total counts from fullrun_pn_xmm0551020801_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 321.00 [Wed May 15 03:57:12 2013] Total counts from fullrun_pn_xmm0551020801_pi300-10000_pass1_cl_src1_bgd.pi.gz = 1372.00 [Wed May 15 03:57:12 2013] Got source and background scale factors 1091384.000000, 10684487.000000 [Wed May 15 03:57:12 2013] User source parameters: Position = (175.5, 238.1) = 8 53 18.01 28 13 49.3 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 180.9 +/- 18.9 Background aperture counts = 140.1 Rate = 0.02 +/- 0.002 [Wed May 15 03:57:12 2013] Updating counts from extracted products [Wed May 15 03:57:12 2013] Set source signif. to 180.85/11.84 = 15.28 [Wed May 15 03:57:15 2013] Calculating source flux in energy range 0.30-8.00 [Wed May 15 03:57:15 2013] Using photon index=1.80, rate=0.0157, arf fullrun_pn_xmm0551020801_pi300-10000_pass1_cl_src1.arf [Wed May 15 03:57:15 2013] Assuming count rate is from the 0.30-10.00 bandpass [Wed May 15 03:57:15 2013] Updating source flux to 2e-13 [Wed May 15 03:57:28 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Wed May 15 03:57:30 2013] xmm0551020801/analysis//spectral/fullrun_pn_xmm0551020801_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete