[Thu May 16 01:04:51 2013] Detection parameters:
  Position = (265.8, 348.7) = 22 53 33.10 -14 13 11.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 132.3 +/- 14.7
  Background counts = 11.3
  Rate = 0.006 +/- 0.0007

[Thu May 16 01:04:52 2013] Off-axis axis estimate = 4.35'
[Thu May 16 02:22:48 2013] Using EEF radius (= 8.60 ")to estimate initial spatial extent for simple fitting
[Thu May 16 02:22:48 2013] Initial guess for spatial extent in simple fitting = 8.60"
[Thu May 16 02:22:48 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.018
[Thu May 16 02:22:48 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 8.60"
[Thu May 16 03:02:14 2013] fullrun_mos1_xmm0551020201_pi300-10000_cl_pass0_src6.ximg exists
[Thu May 16 03:02:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551020201_pi300-10000_cl_pass0_src6.csv
[Thu May 16 03:02:14 2013] fullrun_mos1_xmm0551020201_pi300-10000_cl_pass0_src6_1.ximg exists
[Thu May 16 03:02:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551020201_pi300-10000_cl_pass0_src6.csv
[Thu May 16 03:02:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551020201_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551020201_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 16 03:02:14 2013] fullrun_mos1_xmm0551020201_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Thu May 16 03:02:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551020201_pi300-10000_cl_pass0_tfrozen_src6.csv
[Thu May 16 03:02:14 2013] fullrun_mos1_xmm0551020201_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Thu May 16 03:02:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551020201_pi300-10000_cl_pass0_tfrozen_src6.csv
[Thu May 16 03:02:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551020201_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551020201_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 16 04:04:35 2013] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 10.439219 pixels away
[Thu May 16 04:04:35 2013] Vigneting correction estimate = 1.000000
[Thu May 16 04:04:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 16 04:04:35 2013] Assessing source extent using major
[Thu May 16 04:04:35 2013] Source does appear to be extended
[Thu May 16 04:04:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 16 05:13:17 2013] Using EEF radius (= 8.60 ")to estimate initial spatial extent for simple fitting
[Thu May 16 05:13:17 2013] Initial guess for spatial extent in simple fitting = 8.60"
[Thu May 16 05:13:17 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.018
[Thu May 16 05:13:17 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 8.60"
[Thu May 16 05:42:35 2013] fullrun_mos1_xmm0551020201_pi300-10000_cl_pass1_src6.ximg exists
[Thu May 16 05:42:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551020201_pi300-10000_cl_pass1_src6.csv
[Thu May 16 05:42:35 2013] fullrun_mos1_xmm0551020201_pi300-10000_cl_pass1_src6_1.ximg exists
[Thu May 16 05:42:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551020201_pi300-10000_cl_pass1_src6.csv
[Thu May 16 05:42:35 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551020201_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551020201_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 16 05:42:35 2013] fullrun_mos1_xmm0551020201_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Thu May 16 05:42:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551020201_pi300-10000_cl_pass1_tfrozen_src6.csv
[Thu May 16 05:42:35 2013] fullrun_mos1_xmm0551020201_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Thu May 16 05:42:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551020201_pi300-10000_cl_pass1_tfrozen_src6.csv
[Thu May 16 05:42:35 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551020201_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551020201_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 16 06:25:54 2013] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 10.873720 pixels away
[Thu May 16 06:25:54 2013] Vigneting correction estimate = 1.000000
[Thu May 16 06:25:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 16 06:25:54 2013] Assessing source extent using major
[Thu May 16 06:25:54 2013] Source does appear to be extended
[Thu May 16 06:25:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 16 07:22:19 2013] XMMSAS src. selection expression = ellipse(23073.592590, 30289.035614, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 16 07:22:19 2013] Writing source region out to fullrun_mos1_xmm0551020201_pi300-10000_pass1_cl_src4_src.reg
[Thu May 16 07:22:19 2013] Extracting stamp from image fullrun_mos1_xmm0551020201_pi300-10000_cl_sm2.00.img.gz, (228, 311) - (303, 386)
[Thu May 16 07:22:19 2013] XMMSAS bgd. selection expression = annulus(23073.592590, 30289.035614, 1087.500000, 2175.000000, X, Y) && !ellipse(24366.624400, 28966.134800, 393.300811, 393.300811, 0.000000, X, Y)
[Thu May 16 07:22:19 2013] Writing fullrun_mos1_xmm0551020201_pi300-10000_pass1_cl_src4.gif
[Thu May 16 07:23:33 2013] Mean detx,y = (1385.95, -5769.44) 
[Thu May 16 07:23:34 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 16 07:23:58 2013] Binned source spectrum to 10 counts/bin
[Thu May 16 07:23:58 2013] Setting source spectrum file to fullrun_mos1_xmm0551020201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Thu May 16 07:23:58 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0551020201_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Thu May 16 07:39:03 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May 16 07:39:03 2013] rmf not generated due to insufficient counts
[Thu May 16 08:00:39 2013] Updating aperture counts using extracted products
[Thu May 16 08:00:39 2013] Total counts from fullrun_mos1_xmm0551020201_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 167.00
[Thu May 16 08:00:39 2013] Total counts from fullrun_mos1_xmm0551020201_pi300-10000_pass1_cl_src4_bgd.pi.gz = 549.00
[Thu May 16 08:00:40 2013] Got source and background scale factors 1275352.000000, 9056748.000000
[Thu May 16 08:00:40 2013] User source parameters:
  Position = (265.8, 348.7) = 22 53 33.10 -14 13 11.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 89.7 +/- 14.0
  Background aperture counts = 77.3
  Rate = 0.003 +/- 0.0005

[Thu May 16 08:00:40 2013] Updating counts from extracted products
[Thu May 16 08:00:40 2013] Set source signif. to 89.69/8.79 = 10.20
[Thu May 16 08:00:42 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 16 08:00:42 2013] Using photon index=1.80, rate=0.00314, arf fullrun_mos1_xmm0551020201_pi300-10000_pass1_cl_src4.arf
[Thu May 16 08:00:42 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 16 08:00:42 2013] Updating source flux to 4.4e-14
[Thu May 16 08:00:51 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May 16 08:00:53 2013] xmm0551020201/analysis//spectral/fullrun_mos1_xmm0551020201_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete