[Wed Jul 11 01:04:53 2012] Detection parameters:
  Position = (311.8, 318.1) = 17 28 40.42 -46 53 49.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 21652.5 +/- 175.0
  Background counts = 50.8
  Rate = 1 +/- 0.01

[Wed Jul 11 01:04:54 2012] Off-axis axis estimate = 1.72'
[Wed Jul 11 01:06:40 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 01:06:40 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Wed Jul 11 01:06:40 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Wed Jul 11 01:06:40 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.29"
[Wed Jul 11 01:44:05 2012] fullrun_pn_xmm0551020101_pi300-10000_cl_pass0_src3.ximg exists
[Wed Jul 11 01:44:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551020101_pi300-10000_cl_pass0_src3.csv
[Wed Jul 11 01:44:05 2012] fullrun_pn_xmm0551020101_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Jul 11 01:44:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551020101_pi300-10000_cl_pass0_src3.csv
[Wed Jul 11 01:44:05 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551020101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551020101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 01:44:05 2012] fullrun_pn_xmm0551020101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Jul 11 01:44:05 2012] fullrun_pn_xmm0551020101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Jul 11 01:44:05 2012] Fit fullrun_pn_xmm0551020101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Jul 11 02:16:03 2012] Spatial fit model total counts = 19389.100000, observed total counts = 19234.000000
[Wed Jul 11 02:16:03 2012] Offset between fit and detection position for source 3 = 0.154285 pixels
[Wed Jul 11 02:16:03 2012] 19488.850000 total counts/ 4103.750000 bgd. counts: snr = 240.165088
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.154285 pixels
  Position = (311.6, 318.1) = 17 28 40.48 -46 53 50.4
  Extent = 6.0 (5.9-6.1)", rotation angle = 0
  Source counts = 15385.1 +/- 139.6
  Background counts = 4103.8
  Rate = 0.8 +/- 0.007
[Wed Jul 11 02:16:03 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 02:16:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 02:16:03 2012] Assessing source extent using major axis lower bound
[Wed Jul 11 02:16:03 2012] Source does appear to be extended
[Wed Jul 11 02:16:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 02:16:14 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jul 11 02:16:14 2012] Initial guess for spatial extent in simple fitting = 5.99"
[Wed Jul 11 02:16:14 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.136
[Wed Jul 11 02:16:14 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 5.99"
[Wed Jul 11 02:45:49 2012] fullrun_pn_xmm0551020101_pi300-10000_cl_pass1_src3.ximg exists
[Wed Jul 11 02:45:49 2012] fullrun_pn_xmm0551020101_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed Jul 11 02:45:49 2012] Fit fullrun_pn_xmm0551020101_pi300-10000_cl_pass1_src3 appears to have run properly
[Wed Jul 11 02:45:49 2012] fullrun_pn_xmm0551020101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed Jul 11 02:45:49 2012] fullrun_pn_xmm0551020101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Jul 11 02:45:49 2012] Fit fullrun_pn_xmm0551020101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Jul 11 03:20:33 2012] Spatial fit model total counts = 19401.900000, observed total counts = 19234.000000
[Wed Jul 11 03:20:33 2012] Offset between fit and detection position for source 3 = 0.000283 pixels
[Wed Jul 11 03:20:33 2012] 19502.100000 total counts/ 4112.500000 bgd. counts: snr = 239.979628
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.000283 pixels
  Position = (311.6, 318.1) = 17 28 40.48 -46 53 50.4
  Extent = 6.0 (5.9-6.1)", rotation angle = 0
  Source counts = 15389.6 +/- 139.6
  Background counts = 4112.5
  Rate = 0.8 +/- 0.007
[Wed Jul 11 03:20:33 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 03:20:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 03:20:33 2012] Assessing source extent using major axis lower bound
[Wed Jul 11 03:20:33 2012] Source does appear to be extended
[Wed Jul 11 03:20:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 03:20:44 2012] Counts = 15389.600000, rescaling region sizes by 3.000000
[Wed Jul 11 03:20:44 2012] XMMSAS src. selection expression = ellipse(27063.658600, 27630.185000, 1076.797831, 1076.797831, 0.000000, X, Y)
[Wed Jul 11 03:20:44 2012] Writing source region out to fullrun_pn_xmm0551020101_pi300-10000_pass1_cl_src3_src.reg
[Wed Jul 11 03:20:44 2012] Extracting stamp from image fullrun_pn_xmm0551020101_pi300-10000_cl_sm2.00.img.gz, (250, 256) - (374, 380)
[Wed Jul 11 03:20:44 2012] XMMSAS bgd. selection expression = annulus(27063.658600, 27630.185000, 5383.989155, 10767.978310, X, Y) && !ellipse(36390.635437, 18319.283401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28974.986400, 29402.080800, 418.641612, 418.641612, 0.000000, X, Y) && !ellipse(32688.027161, 37188.580597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20927.828445, 37955.456604, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22424.029053, 36256.447601, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28349.082703, 34939.712372, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27808.353480, 26159.341200, 428.152012, 296.470409, 16.786348, X, Y) && !ellipse(27815.241600, 19358.101800, 431.680012, 431.680012, 0.000000, X, Y) && !ellipse(27116.134000, 37376.224600, 374.222411, 266.701608, 310.658204, X, Y) && !ellipse(34961.733185, 35013.551392, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23640.759400, 18284.140600, 615.425618, 310.936009, 189.275231, X, Y) && !ellipse(37522.779755, 34445.693726, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23025.849854, 31190.643738, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22122.315080, 30927.459600, 407.766412, 407.766412, 0.000000, X, Y) && !ellipse(37921.411163, 29888.795258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35043.747040, 29675.291077, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20424.919434, 29100.235626, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25316.651611, 28020.082092, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30709.013458, 27030.701355, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22027.630200, 24480.174800, 377.157611, 377.157611, 0.000000, X, Y) && !ellipse(32496.695129, 24333.199554, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26960.093506, 18095.368851, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jul 11 03:20:44 2012] Writing fullrun_pn_xmm0551020101_pi300-10000_pass1_cl_src3.gif
[Wed Jul 11 03:23:04 2012] Mean detx,y = (73.41, -242.74) 
[Wed Jul 11 03:23:08 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 11 03:25:47 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 11 03:25:48 2012] Setting source spectrum file to fullrun_pn_xmm0551020101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Jul 11 03:25:48 2012] Setting bgd. spectrum file to fullrun_pn_xmm0551020101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed Jul 11 04:47:12 2012] Updating aperture counts using extracted products
[Wed Jul 11 04:47:12 2012] Error reading totcts from fullrun_pn_xmm0551020101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Jul 11 04:47:13 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 11 04:47:13 2012] Using photon index=1.80, rate=0.771, arf fullrun_pn_xmm0551020101_pi300-10000_pass1_cl_src3.arf
[Wed Jul 11 04:47:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 11 04:47:13 2012] Updating source flux to 1.8e-12