[Wed Jul 11 01:05:29 2012] Detection parameters:
  Position = (397.0, 310.1) = 17 28 4.24 -46 54 24.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 94.2 +/- 12.7
  Background counts = 13.2
  Rate = 0.006 +/- 0.0008

[Wed Jul 11 01:05:29 2012] Off-axis axis estimate = 7.20'
[Wed Jul 11 01:59:28 2012] Using EEF radius (= 10.03 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 01:59:28 2012] Initial guess for spatial extent in simple fitting = 10.03"
[Wed Jul 11 01:59:28 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.144
[Wed Jul 11 01:59:28 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 10.03"
[Wed Jul 11 02:15:58 2012] fullrun_mos2_xmm0551020101_pi300-10000_cl_pass0_src7.ximg exists
[Wed Jul 11 02:15:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551020101_pi300-10000_cl_pass0_src7.csv
[Wed Jul 11 02:15:58 2012] fullrun_mos2_xmm0551020101_pi300-10000_cl_pass0_src7_1.ximg exists
[Wed Jul 11 02:15:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551020101_pi300-10000_cl_pass0_src7.csv
[Wed Jul 11 02:15:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551020101_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551020101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 02:15:58 2012] fullrun_mos2_xmm0551020101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Wed Jul 11 02:15:58 2012] fullrun_mos2_xmm0551020101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Wed Jul 11 02:15:58 2012] Fit fullrun_mos2_xmm0551020101_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Wed Jul 11 02:16:07 2012] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 13.567877 pixels away
[Wed Jul 11 02:16:07 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 02:16:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 02:16:07 2012] Assessing source extent using major
[Wed Jul 11 02:16:07 2012] Source does appear to be extended
[Wed Jul 11 02:16:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 02:58:56 2012] Using EEF radius (= 10.03 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 02:58:56 2012] Initial guess for spatial extent in simple fitting = 10.03"
[Wed Jul 11 02:58:56 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.144
[Wed Jul 11 02:58:56 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 10.03"
[Wed Jul 11 03:20:29 2012] fullrun_mos2_xmm0551020101_pi300-10000_cl_pass1_src7.ximg exists
[Wed Jul 11 03:20:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551020101_pi300-10000_cl_pass1_src7.csv
[Wed Jul 11 03:20:29 2012] fullrun_mos2_xmm0551020101_pi300-10000_cl_pass1_src7_1.ximg exists
[Wed Jul 11 03:20:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551020101_pi300-10000_cl_pass1_src7.csv
[Wed Jul 11 03:20:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551020101_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551020101_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 03:20:29 2012] fullrun_mos2_xmm0551020101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Wed Jul 11 03:20:29 2012] fullrun_mos2_xmm0551020101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Wed Jul 11 03:20:29 2012] Fit fullrun_mos2_xmm0551020101_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Wed Jul 11 03:20:37 2012] Spatial fit model total counts = 206.000000, observed total counts = 206.000000
[Wed Jul 11 03:20:37 2012] Offset between fit and detection position for source 10 = 0.095922 pixels
[Wed Jul 11 03:20:37 2012] 206.582400 total counts/ 143.444000 bgd. counts: snr = 5.271721
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.095922 pixels
  Position = (396.9, 310.2) = 17 28 4.28 -46 54 24.6
  Extent = 4.8 (3.8-6.4)", rotation angle = 0
  Source counts = 63.1 +/- 14.4
  Background counts = 143.4
  Rate = 0.003 +/- 0.0007
[Wed Jul 11 03:20:37 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 03:20:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 03:20:37 2012] Assessing source extent using major axis lower bound
[Wed Jul 11 03:20:37 2012] Source does appear to be extended
[Wed Jul 11 03:20:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 04:31:41 2012] XMMSAS src. selection expression = ellipse(34481.946020, 26936.493600, 290.760008, 290.760008, 0.000000, X, Y)
[Wed Jul 11 04:31:41 2012] Writing source region out to fullrun_mos2_xmm0551020101_pi300-10000_pass1_cl_src10_src.reg
[Wed Jul 11 04:31:41 2012] Extracting stamp from image fullrun_mos2_xmm0551020101_pi300-10000_cl_sm2.00.img.gz, (380, 293) - (414, 327)
[Wed Jul 11 04:31:41 2012] XMMSAS bgd. selection expression = annulus(34481.946020, 26936.493600, 484.600014, 969.200028, X, Y)
[Wed Jul 11 04:31:41 2012] Writing fullrun_mos2_xmm0551020101_pi300-10000_pass1_cl_src10.gif
[Wed Jul 11 04:33:46 2012] Mean detx,y = (-7349.92, -432.71) 
[Wed Jul 11 04:33:47 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 11 04:33:55 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 11 04:33:55 2012] Setting source spectrum file to fullrun_mos2_xmm0551020101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Wed Jul 11 04:33:55 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0551020101_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Wed Jul 11 04:45:59 2012] Not generating rmf since there are only 63 counts
[Wed Jul 11 04:45:59 2012] rmf not generated due to insufficient counts
[Wed Jul 11 04:47:13 2012] Updating aperture counts using extracted products
[Wed Jul 11 04:47:13 2012] Error reading totcts from fullrun_mos2_xmm0551020101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Wed Jul 11 04:47:13 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 11 04:47:13 2012] Using photon index=1.80, rate=0.00292, arf fullrun_mos2_xmm0551020101_pi300-10000_pass1_cl_src10.arf
[Wed Jul 11 04:47:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 11 04:47:13 2012] Updating source flux to 5.2e-14
[Wed Jul 11 04:47:46 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting