[Wed Jul 11 01:05:29 2012] Detection parameters:
  Position = (311.8, 318.1) = 17 28 40.41 -46 53 50.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 5536.8 +/- 88.2
  Background counts = 15.6
  Rate = 0.3 +/- 0.004

[Wed Jul 11 01:05:29 2012] Off-axis axis estimate = 1.72'
[Wed Jul 11 01:59:28 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 01:59:28 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Wed Jul 11 01:59:28 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Wed Jul 11 01:59:28 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Wed Jul 11 02:15:58 2012] fullrun_mos2_xmm0551020101_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jul 11 02:15:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551020101_pi300-10000_cl_pass0_src1.csv
[Wed Jul 11 02:15:58 2012] fullrun_mos2_xmm0551020101_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jul 11 02:15:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551020101_pi300-10000_cl_pass0_src1.csv
[Wed Jul 11 02:15:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551020101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551020101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 02:15:58 2012] fullrun_mos2_xmm0551020101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jul 11 02:15:58 2012] fullrun_mos2_xmm0551020101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jul 11 02:15:58 2012] Fit fullrun_mos2_xmm0551020101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Jul 11 02:16:07 2012] Spatial fit model total counts = 5249.150000, observed total counts = 5009.000000
[Wed Jul 11 02:16:07 2012] Offset between fit and detection position for source 1 = 0.197589 pixels
[Wed Jul 11 02:16:07 2012] 5273.680000 total counts/ 1489.310000 bgd. counts: snr = 98.062066
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.197589 pixels
  Position = (311.6, 318.2) = 17 28 40.49 -46 53 50.3
  Extent = 5.2 (5.0-5.3)", rotation angle = 0
  Source counts = 3784.4 +/- 72.6
  Background counts = 1489.3
  Rate = 0.2 +/- 0.003
[Wed Jul 11 02:16:07 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 02:16:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 02:16:07 2012] Assessing source extent using major axis lower bound
[Wed Jul 11 02:16:07 2012] Source does appear to be extended
[Wed Jul 11 02:16:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 02:58:56 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jul 11 02:58:56 2012] Initial guess for spatial extent in simple fitting = 5.18"
[Wed Jul 11 02:58:56 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.051
[Wed Jul 11 02:58:56 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.18"
[Wed Jul 11 03:20:29 2012] fullrun_mos2_xmm0551020101_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jul 11 03:20:29 2012] fullrun_mos2_xmm0551020101_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jul 11 03:20:29 2012] Fit fullrun_mos2_xmm0551020101_pi300-10000_cl_pass1_src1 appears to have run properly
[Wed Jul 11 03:20:29 2012] fullrun_mos2_xmm0551020101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jul 11 03:20:29 2012] fullrun_mos2_xmm0551020101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jul 11 03:20:29 2012] Fit fullrun_mos2_xmm0551020101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Jul 11 03:20:37 2012] Spatial fit model total counts = 5118.200000, observed total counts = 5036.000000
[Wed Jul 11 03:20:37 2012] Offset between fit and detection position for source 1 = 0.019883 pixels
[Wed Jul 11 03:20:37 2012] 5157.770000 total counts/ 1431.150000 bgd. counts: snr = 98.508234
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.019883 pixels
  Position = (311.6, 318.2) = 17 28 40.50 -46 53 50.3
  Extent = 5.4" x 4.8", rotation angle = 2
  Source counts = 3726.6 +/- 71.8
  Background counts = 1431.2
  Rate = 0.2 +/- 0.003
[Wed Jul 11 03:20:37 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 03:20:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 03:20:37 2012] Assessing source extent using major
[Wed Jul 11 03:20:37 2012] Source does appear to be extended
[Wed Jul 11 03:20:37 2012] Computing asymmetry using major and minor axis, asym = 1.12
[Wed Jul 11 04:31:41 2012] Counts = 3726.620000, rescaling region sizes by 2.000000
[Wed Jul 11 04:31:41 2012] XMMSAS src. selection expression = ellipse(27059.872260, 27631.038922, 650.160687, 581.017860, 2.317834, X, Y)
[Wed Jul 11 04:31:41 2012] Writing source region out to fullrun_mos2_xmm0551020101_pi300-10000_pass1_cl_src1_src.reg
[Wed Jul 11 04:31:41 2012] Extracting stamp from image fullrun_mos2_xmm0551020101_pi300-10000_cl_sm2.00.img.gz, (274, 281) - (349, 356)
[Wed Jul 11 04:31:41 2012] XMMSAS bgd. selection expression = annulus(27059.872260, 27631.038922, 2167.202289, 4334.404577, X, Y) && !ellipse(28976.698800, 29392.201200, 397.656811, 397.656811, 0.000000, X, Y) && !ellipse(27806.843414, 26114.453400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30684.816200, 27024.371400, 446.636813, 446.636813, 0.000000, X, Y)
[Wed Jul 11 04:31:41 2012] Writing fullrun_mos2_xmm0551020101_pi300-10000_pass1_cl_src1.gif
[Wed Jul 11 04:31:42 2012] Mean detx,y = (82.55, 111.39) 
[Wed Jul 11 04:31:43 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 11 04:31:51 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 11 04:31:51 2012] Setting source spectrum file to fullrun_mos2_xmm0551020101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jul 11 04:31:51 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0551020101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Jul 11 04:47:13 2012] Updating aperture counts using extracted products
[Wed Jul 11 04:47:13 2012] Error reading totcts from fullrun_mos2_xmm0551020101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jul 11 04:47:13 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 11 04:47:13 2012] Using photon index=1.80, rate=0.172, arf fullrun_mos2_xmm0551020101_pi300-10000_pass1_cl_src1.arf
[Wed Jul 11 04:47:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 11 04:47:13 2012] Updating source flux to 1.9e-12
[Wed Jul 11 04:48:22 2012] Reading fit data from xmm0551020101/analysis//spectral/fullrun_mos2_xmm0551020101_pi300-10000_pass1_cl_src1_pl.csv
[Wed Jul 11 04:48:22 2012] Spectral fit parameter nH value = 3.81778e+21
[Wed Jul 11 04:48:22 2012] Spectral fit parameter PhoIndex value = 5.66114
[Wed Jul 11 04:48:22 2012] Failed to get F(0.3-8.0) from xmm0551020101/analysis//spectral/fullrun_mos2_xmm0551020101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Jul 11 04:48:22 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 11 04:48:22 2012] Using Nh = 3.8e+21, photon index=5.66, rate=0.172, arf fullrun_mos2_xmm0551020101_pi300-10000_pass1_cl_src1.arf
[Wed Jul 11 04:48:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 11 04:48:22 2012] Updating source flux to 1.1e-12