[Thu Jun 21 14:56:29 2012] Detection parameters:
  Position = (292.8, 363.7) = 13 46 40.08 -62 48 55.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 75.4 +/- 17.5
  Background counts = 111.9
  Rate = 0.002 +/- 0.0004

[Thu Jun 21 14:56:30 2012] Off-axis axis estimate = 4.75'
[Thu Jun 21 15:32:31 2012] Using EEF radius (= 8.80 ")to estimate initial spatial extent for simple fitting
[Thu Jun 21 15:32:31 2012] Initial guess for spatial extent in simple fitting = 8.80"
[Thu Jun 21 15:32:31 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.981
[Thu Jun 21 15:32:31 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 8.80"
[Thu Jun 21 15:57:40 2012] fullrun_mos2_xmm0551000201_pi300-10000_cl_pass0_src15.ximg exists
[Thu Jun 21 15:57:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551000201_pi300-10000_cl_pass0_src15.csv
[Thu Jun 21 15:57:40 2012] fullrun_mos2_xmm0551000201_pi300-10000_cl_pass0_src15_1.ximg exists
[Thu Jun 21 15:57:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551000201_pi300-10000_cl_pass0_src15.csv
[Thu Jun 21 15:57:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551000201_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551000201_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 15:57:40 2012] fullrun_mos2_xmm0551000201_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Thu Jun 21 15:57:40 2012] fullrun_mos2_xmm0551000201_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Thu Jun 21 15:57:40 2012] Fit fullrun_mos2_xmm0551000201_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Thu Jun 21 15:57:52 2012] Warning, spatial fit 15 centroid is now closest to src. 9
[Thu Jun 21 15:57:52 2012] Vigneting correction estimate = 1.000000
[Thu Jun 21 15:57:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 21 15:57:52 2012] Assessing source extent using major
[Thu Jun 21 15:57:52 2012] Source does appear to be extended
[Thu Jun 21 15:57:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 15:57:52 2012] Source is confused with source 8
[Thu Jun 21 16:31:39 2012] Using EEF radius (= 8.80 ")to estimate initial spatial extent for simple fitting
[Thu Jun 21 16:31:39 2012] Initial guess for spatial extent in simple fitting = 8.80"
[Thu Jun 21 16:31:39 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.981
[Thu Jun 21 16:31:39 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 8.80"
[Thu Jun 21 17:04:31 2012] fullrun_mos2_xmm0551000201_pi300-10000_cl_pass1_src13.ximg exists
[Thu Jun 21 17:04:31 2012] fullrun_mos2_xmm0551000201_pi300-10000_cl_pass1_src13_1.ximg exists
[Thu Jun 21 17:04:31 2012] Fit fullrun_mos2_xmm0551000201_pi300-10000_cl_pass1_src13 appears to have run properly
[Thu Jun 21 17:04:31 2012] fullrun_mos2_xmm0551000201_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Thu Jun 21 17:04:31 2012] fullrun_mos2_xmm0551000201_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Thu Jun 21 17:04:31 2012] Fit fullrun_mos2_xmm0551000201_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Thu Jun 21 17:04:42 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 26.861565 pixels away
[Thu Jun 21 17:04:42 2012] Warning, spatial fit 13 centroid is now closest to src. 8
[Thu Jun 21 17:04:42 2012] Vigneting correction estimate = 1.000000
[Thu Jun 21 17:04:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 21 17:04:42 2012] Assessing source extent using major
[Thu Jun 21 17:04:42 2012] Source does appear to be extended
[Thu Jun 21 17:04:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 18:00:46 2012] XMMSAS src. selection expression = ellipse(25425.252930, 31595.501190, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 21 18:00:46 2012] Writing source region out to fullrun_mos2_xmm0551000201_pi300-10000_pass1_cl_src7_src.reg
[Thu Jun 21 18:00:46 2012] Extracting stamp from image fullrun_mos2_xmm0551000201_pi300-10000_cl_sm2.00.img.gz, (255, 326) - (330, 401)
[Thu Jun 21 18:00:46 2012] XMMSAS bgd. selection expression = annulus(25425.252930, 31595.501190, 1087.500000, 2175.000000, X, Y) && !ellipse(25810.230000, 31169.092000, 1408.648041, 1408.648041, 0.000000, X, Y) && !ellipse(25763.527000, 31338.234200, 2817.296081, 568.350416, 19.727000, X, Y)
[Thu Jun 21 18:00:46 2012] Writing fullrun_mos2_xmm0551000201_pi300-10000_pass1_cl_src7.gif
[Thu Jun 21 18:08:51 2012] Mean detx,y = (5074.33, -5727.74) 
[Thu Jun 21 18:08:54 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 21 18:09:45 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 21 18:09:46 2012] Setting source spectrum file to fullrun_mos2_xmm0551000201_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Thu Jun 21 18:09:46 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0551000201_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Thu Jun 21 18:31:27 2012] Not generating rmf since there are only 75 counts
[Thu Jun 21 18:31:27 2012] rmf not generated due to insufficient counts
[Thu Jun 21 18:33:14 2012] Updating aperture counts using extracted products
[Thu Jun 21 18:33:14 2012] Error reading totcts from fullrun_mos2_xmm0551000201_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Thu Jun 21 18:33:14 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 21 18:33:14 2012] Using photon index=1.80, rate=0.00193, arf fullrun_mos2_xmm0551000201_pi300-10000_pass1_cl_src7.arf
[Thu Jun 21 18:33:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 21 18:33:15 2012] Updating source flux to 2.8e-14
[Thu Jun 21 18:34:30 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting