[Thu Jun 21 14:56:29 2012] Detection parameters:
  Position = (304.8, 275.3) = 13 46 32.48 -62 55 22.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 5472.9 +/- 89.5
  Background counts = 122.8
  Rate = 0.1 +/- 0.002

[Thu Jun 21 14:56:30 2012] Off-axis axis estimate = 1.74'
[Thu Jun 21 15:32:31 2012] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Thu Jun 21 15:32:31 2012] Initial guess for spatial extent in simple fitting = 7.30"
[Thu Jun 21 15:32:31 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.843
[Thu Jun 21 15:32:31 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.30"
[Thu Jun 21 15:57:40 2012] fullrun_mos2_xmm0551000201_pi300-10000_cl_pass0_src1.ximg exists
[Thu Jun 21 15:57:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551000201_pi300-10000_cl_pass0_src1.csv
[Thu Jun 21 15:57:40 2012] fullrun_mos2_xmm0551000201_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Jun 21 15:57:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551000201_pi300-10000_cl_pass0_src1.csv
[Thu Jun 21 15:57:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551000201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551000201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 15:57:40 2012] fullrun_mos2_xmm0551000201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Jun 21 15:57:40 2012] fullrun_mos2_xmm0551000201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jun 21 15:57:40 2012] Fit fullrun_mos2_xmm0551000201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Jun 21 15:57:52 2012] Spatial fit model total counts = 5066.050000, observed total counts = 4902.000000
[Thu Jun 21 15:57:52 2012] Offset between fit and detection position for source 1 = 0.216784 pixels
[Thu Jun 21 15:57:52 2012] 5044.110000 total counts/ 1768.370000 bgd. counts: snr = 77.897381
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.216784 pixels
  Position = (304.8, 275.5) = 13 46 32.48 -62 55 22.0
  Extent = 5.3 (5.1-5.5)", rotation angle = 0
  Source counts = 3275.7 +/- 71.0
  Background counts = 1768.4
  Rate = 0.07 +/- 0.001
[Thu Jun 21 15:57:52 2012] Vigneting correction estimate = 1.000000
[Thu Jun 21 15:57:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 21 15:57:52 2012] Assessing source extent using major axis lower bound
[Thu Jun 21 15:57:52 2012] Source does appear to be extended
[Thu Jun 21 15:57:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 16:31:39 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 21 16:31:39 2012] Initial guess for spatial extent in simple fitting = 5.29"
[Thu Jun 21 16:31:39 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.764
[Thu Jun 21 16:31:39 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.29"
[Thu Jun 21 17:04:31 2012] fullrun_mos2_xmm0551000201_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jun 21 17:04:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551000201_pi300-10000_cl_pass1_src1.csv
[Thu Jun 21 17:04:31 2012] fullrun_mos2_xmm0551000201_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jun 21 17:04:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551000201_pi300-10000_cl_pass1_src1.csv
[Thu Jun 21 17:04:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551000201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551000201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 17:04:31 2012] fullrun_mos2_xmm0551000201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jun 21 17:04:31 2012] fullrun_mos2_xmm0551000201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jun 21 17:04:31 2012] Fit fullrun_mos2_xmm0551000201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Jun 21 17:04:42 2012] Spatial fit model total counts = 5058.520000, observed total counts = 4907.000000
[Thu Jun 21 17:04:42 2012] Offset between fit and detection position for source 1 = 0.010351 pixels
[Thu Jun 21 17:04:42 2012] 5058.560000 total counts/ 1792.070000 bgd. counts: snr = 77.162066
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.010351 pixels
  Position = (304.8, 275.5) = 13 46 32.49 -62 55 22.0
  Extent = 5.3 (5.1-5.4)", rotation angle = 0
  Source counts = 3266.5 +/- 71.1
  Background counts = 1792.1
  Rate = 0.07 +/- 0.001
[Thu Jun 21 17:04:42 2012] Vigneting correction estimate = 1.000000
[Thu Jun 21 17:04:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 21 17:04:42 2012] Assessing source extent using major axis lower bound
[Thu Jun 21 17:04:42 2012] Source does appear to be extended
[Thu Jun 21 17:04:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 18:00:46 2012] Counts = 3266.490000, rescaling region sizes by 2.000000
[Thu Jun 21 18:00:46 2012] XMMSAS src. selection expression = ellipse(26465.109600, 23920.254400, 632.985618, 632.985618, 0.000000, X, Y)
[Thu Jun 21 18:00:46 2012] Writing source region out to fullrun_mos2_xmm0551000201_pi300-10000_pass1_cl_src1_src.reg
[Thu Jun 21 18:00:46 2012] Extracting stamp from image fullrun_mos2_xmm0551000201_pi300-10000_cl_sm2.00.img.gz, (268, 239) - (341, 312)
[Thu Jun 21 18:00:46 2012] XMMSAS bgd. selection expression = annulus(26465.109600, 23920.254400, 2109.952061, 4219.904121, X, Y) && !ellipse(29739.397600, 27554.945800, 351.378410, 351.378410, 0.000000, X, Y) && !ellipse(28919.337860, 19434.710327, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 21 18:00:46 2012] Writing fullrun_mos2_xmm0551000201_pi300-10000_pass1_cl_src1.gif
[Thu Jun 21 18:00:53 2012] Mean detx,y = (67.30, 102.42) 
[Thu Jun 21 18:00:56 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 21 18:01:16 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 21 18:01:16 2012] Setting source spectrum file to fullrun_mos2_xmm0551000201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jun 21 18:01:16 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0551000201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Jun 21 18:33:13 2012] Updating aperture counts using extracted products
[Thu Jun 21 18:33:13 2012] Error reading totcts from fullrun_mos2_xmm0551000201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jun 21 18:33:14 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 21 18:33:14 2012] Using photon index=1.80, rate=0.0681, arf fullrun_mos2_xmm0551000201_pi300-10000_pass1_cl_src1.arf
[Thu Jun 21 18:33:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 21 18:33:14 2012] Updating source flux to 7.6e-13
[Thu Jun 21 18:35:58 2012] Reading fit data from xmm0551000201/analysis//spectral/fullrun_mos2_xmm0551000201_pi300-10000_pass1_cl_src1_pl.csv
[Thu Jun 21 18:35:58 2012] Spectral fit parameter nH value = 2.42306e+21
[Thu Jun 21 18:35:58 2012] Spectral fit parameter PhoIndex value = 1.76196
[Thu Jun 21 18:35:58 2012] Failed to get F(0.3-8.0) from xmm0551000201/analysis//spectral/fullrun_mos2_xmm0551000201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Jun 21 18:35:58 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 21 18:35:58 2012] Using Nh = 2.4e+21, photon index=1.76, rate=0.0681, arf fullrun_mos2_xmm0551000201_pi300-10000_pass1_cl_src1.arf
[Thu Jun 21 18:35:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 21 18:35:58 2012] Updating source flux to 9.4e-13