[Thu Jun 21 14:56:02 2012] Detection parameters:
  Position = (214.1, 235.0) = 13 47 30.35 -62 58 15.2
  Extent = 21.7" x 21.7", rotation angle = 0 degrees
  Source counts = 116.7 +/- 14.9
  Background counts = 291.6
  Rate = 0.004 +/- 0.0005

[Thu Jun 21 14:56:02 2012] Off-axis axis estimate = 7.65'
[Thu Jun 21 15:18:19 2012] Using EEF radius (= 10.26 ")to estimate initial spatial extent for simple fitting
[Thu Jun 21 15:18:19 2012] Initial guess for spatial extent in simple fitting = 10.26"
[Thu Jun 21 15:18:19 2012] source mask rpix=2.4, npix_max = 32, mask sum = 26, frac = 0.796
[Thu Jun 21 15:18:19 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 10.26"
[Thu Jun 21 15:32:30 2012] fullrun_mos1_xmm0551000201_pi300-10000_cl_pass0_src8.ximg exists
[Thu Jun 21 15:32:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551000201_pi300-10000_cl_pass0_src8.csv
[Thu Jun 21 15:32:30 2012] fullrun_mos1_xmm0551000201_pi300-10000_cl_pass0_src8_1.ximg exists
[Thu Jun 21 15:32:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551000201_pi300-10000_cl_pass0_src8.csv
[Thu Jun 21 15:32:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551000201_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551000201_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 15:32:30 2012] fullrun_mos1_xmm0551000201_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Thu Jun 21 15:32:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551000201_pi300-10000_cl_pass0_tfrozen_src8.csv
[Thu Jun 21 15:32:30 2012] fullrun_mos1_xmm0551000201_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Thu Jun 21 15:32:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551000201_pi300-10000_cl_pass0_tfrozen_src8.csv
[Thu Jun 21 15:32:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551000201_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551000201_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 15:57:48 2012] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 13.011622 pixels away
[Thu Jun 21 15:57:48 2012] Vigneting correction estimate = 1.000000
[Thu Jun 21 15:57:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 21 15:57:48 2012] Assessing source extent using major
[Thu Jun 21 15:57:48 2012] Source does appear to be extended
[Thu Jun 21 15:57:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 16:17:12 2012] Using EEF radius (= 10.26 ")to estimate initial spatial extent for simple fitting
[Thu Jun 21 16:17:12 2012] Initial guess for spatial extent in simple fitting = 10.26"
[Thu Jun 21 16:17:12 2012] source mask rpix=2.4, npix_max = 32, mask sum = 26, frac = 0.796
[Thu Jun 21 16:17:12 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 10.26"
[Thu Jun 21 16:31:38 2012] fullrun_mos1_xmm0551000201_pi300-10000_cl_pass1_src8.ximg exists
[Thu Jun 21 16:31:38 2012] fullrun_mos1_xmm0551000201_pi300-10000_cl_pass1_src8_1.ximg exists
[Thu Jun 21 16:31:38 2012] Fit fullrun_mos1_xmm0551000201_pi300-10000_cl_pass1_src8 appears to have run properly
[Thu Jun 21 16:31:38 2012] fullrun_mos1_xmm0551000201_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Thu Jun 21 16:31:38 2012] fullrun_mos1_xmm0551000201_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Thu Jun 21 16:31:38 2012] Fit fullrun_mos1_xmm0551000201_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Thu Jun 21 17:04:38 2012] Source 10 is offset by 4.806719 and 8.384830 pixels which is larger than
2 X fitted extent = 6.075448 x 3.439218, not incorporating fit results
[Thu Jun 21 17:04:38 2012] Vigneting correction estimate = 1.000000
[Thu Jun 21 17:04:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 21 17:04:38 2012] Assessing source extent using major
[Thu Jun 21 17:04:38 2012] Source does appear to be extended
[Thu Jun 21 17:04:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 17:33:00 2012] XMMSAS src. selection expression = ellipse(18575.302567, 20392.496216, 1305.000000, 1305.000000, 0.000000, X, Y)
[Thu Jun 21 17:33:00 2012] Writing source region out to fullrun_mos1_xmm0551000201_pi300-10000_pass1_cl_src10_src.reg
[Thu Jun 21 17:33:00 2012] Extracting stamp from image fullrun_mos1_xmm0551000201_pi300-10000_cl_sm2.00.img.gz, (139, 160) - (289, 310)
[Thu Jun 21 17:33:00 2012] XMMSAS bgd. selection expression = annulus(18575.302567, 20392.496216, 2175.000000, 4350.000000, X, Y) && !ellipse(13551.914124, 24564.577393, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 21 17:33:00 2012] Writing fullrun_mos1_xmm0551000201_pi300-10000_pass1_cl_src10.gif
[Thu Jun 21 17:36:08 2012] Mean detx,y = (-3275.25, 7674.24) 
[Thu Jun 21 17:36:10 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 21 17:37:26 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 21 17:37:27 2012] Setting source spectrum file to fullrun_mos1_xmm0551000201_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Thu Jun 21 17:37:27 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0551000201_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Thu Jun 21 18:00:24 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 21 18:00:24 2012] rmf not generated due to insufficient counts
[Thu Jun 21 18:33:13 2012] Updating aperture counts using extracted products
[Thu Jun 21 18:33:13 2012] Error reading totcts from fullrun_mos1_xmm0551000201_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Thu Jun 21 18:33:13 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 21 18:33:13 2012] Using photon index=1.80, rate=0.00353, arf fullrun_mos1_xmm0551000201_pi300-10000_pass1_cl_src10.arf
[Thu Jun 21 18:33:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 21 18:33:13 2012] Updating source flux to 4.6e-14
[Thu Jun 21 18:33:16 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting