[Sun Jun  3 03:29:38 2012] Detection parameters:
  Position = (446.2, 214.9) = 11 30 58.06 31 9 37.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 66.2 +/- 12.7
  Background counts = 22.2
  Rate = 0.003 +/- 0.0006

[Sun Jun  3 03:29:38 2012] Off-axis axis estimate = 12.31'
[Sun Jun  3 03:31:57 2012] Using EEF radius (= 12.58 ")to estimate initial spatial extent for simple fitting
[Sun Jun  3 03:31:57 2012] Initial guess for spatial extent in simple fitting = 12.58"
[Sun Jun  3 03:31:57 2012] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.064
[Sun Jun  3 03:31:57 2012] Giving source the simple spatial ID 34 for pass 0, mean size = 12.58"
[Sun Jun  3 05:16:18 2012] fullrun_pn_xmm0550960301_pi300-10000_cl_pass0_src34.ximg exists
[Sun Jun  3 05:16:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550960301_pi300-10000_cl_pass0_src34.csv
[Sun Jun  3 05:16:18 2012] fullrun_pn_xmm0550960301_pi300-10000_cl_pass0_src34_1.ximg exists
[Sun Jun  3 05:16:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550960301_pi300-10000_cl_pass0_src34.csv
[Sun Jun  3 05:16:18 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550960301_pi300-10000_cl_pass0_src34_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550960301_pi300-10000_cl_pass0_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 05:16:19 2012] fullrun_pn_xmm0550960301_pi300-10000_cl_pass0_tfrozen_src34.ximg exists
[Sun Jun  3 05:16:19 2012] fullrun_pn_xmm0550960301_pi300-10000_cl_pass0_tfrozen_src34_1.ximg exists
[Sun Jun  3 05:16:19 2012] Fit fullrun_pn_xmm0550960301_pi300-10000_cl_pass0_tfrozen_src34 appears to have run properly
[Sun Jun  3 06:19:14 2012] Spatial fit model total counts = 552.714000, observed total counts = 518.000000
[Sun Jun  3 06:19:14 2012] Offset between fit and detection position for source 36 = 2.523424 pixels
[Sun Jun  3 06:19:14 2012] Warning, changing simple spatial fit ID from 34 to 32
[Sun Jun  3 06:19:14 2012] 510.498500 total counts/ 487.440000 bgd. counts: snr = 1.044409
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 2.523424 pixels
  Position = (445.8, 212.4) = 11 30 58.21 31 9 27.1
  Extent = 7.1 (4.1-9.4)" x 5.3 (3.1-10.8)", rotation angle = 90 (90-90) degrees
  Source counts = 23.1 +/- 22.6
  Background counts = 487.4
  Rate = 0.001 +/- 0.001
  Deleting source due to low Poisson probability