[Sun Jun  3 03:29:38 2012] Detection parameters:
  Position = (453.3, 268.8) = 11 30 55.63 31 13 33.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 102.8 +/- 15.6
  Background counts = 26.4
  Rate = 0.005 +/- 0.0007

[Sun Jun  3 03:29:38 2012] Off-axis axis estimate = 11.43'
[Sun Jun  3 03:31:57 2012] Using EEF radius (= 12.14 ")to estimate initial spatial extent for simple fitting
[Sun Jun  3 03:31:57 2012] Initial guess for spatial extent in simple fitting = 12.14"
[Sun Jun  3 03:31:57 2012] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.969
[Sun Jun  3 03:31:57 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 12.14"
[Sun Jun  3 05:16:18 2012] fullrun_pn_xmm0550960301_pi300-10000_cl_pass0_src27.ximg exists
[Sun Jun  3 05:16:18 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0550960301_pi300-10000_cl_pass0_src27.csv
[Sun Jun  3 05:16:18 2012] fullrun_pn_xmm0550960301_pi300-10000_cl_pass0_src27_1.ximg exists
[Sun Jun  3 05:16:18 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0550960301_pi300-10000_cl_pass0_src27.csv
[Sun Jun  3 05:16:18 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550960301_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550960301_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 05:16:19 2012] fullrun_pn_xmm0550960301_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Sun Jun  3 05:16:19 2012] fullrun_pn_xmm0550960301_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Sun Jun  3 05:16:19 2012] Fit fullrun_pn_xmm0550960301_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Sun Jun  3 06:19:14 2012] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 12.024030 pixels away
[Sun Jun  3 06:19:14 2012] Vigneting correction estimate = 1.000000
[Sun Jun  3 06:19:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  3 06:19:14 2012] Assessing source extent using major
[Sun Jun  3 06:19:14 2012] Source does appear to be extended
[Sun Jun  3 06:19:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  3 06:19:35 2012] Using EEF radius (= 12.14 ")to estimate initial spatial extent for simple fitting
[Sun Jun  3 06:19:35 2012] Initial guess for spatial extent in simple fitting = 12.14"
[Sun Jun  3 06:19:35 2012] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.969
[Sun Jun  3 06:19:35 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 12.14"
[Sun Jun  3 07:54:37 2012] fullrun_pn_xmm0550960301_pi300-10000_cl_pass1_src27.ximg exists
[Sun Jun  3 07:54:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550960301_pi300-10000_cl_pass1_src27.csv
[Sun Jun  3 07:54:37 2012] fullrun_pn_xmm0550960301_pi300-10000_cl_pass1_src27_1.ximg exists
[Sun Jun  3 07:54:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550960301_pi300-10000_cl_pass1_src27.csv
[Sun Jun  3 07:54:37 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550960301_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550960301_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 07:54:38 2012] fullrun_pn_xmm0550960301_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Sun Jun  3 07:54:38 2012] fullrun_pn_xmm0550960301_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Sun Jun  3 07:54:38 2012] Fit fullrun_pn_xmm0550960301_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Sun Jun  3 08:55:05 2012] Spatial fit model total counts = -79.893400, observed total counts = 312.000000
[Sun Jun  3 08:55:05 2012] Poor agreement between spatial fit and data for source 29
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun  3 08:55:05 2012] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 12.007930 pixels away
[Sun Jun  3 08:55:05 2012] Vigneting correction estimate = 1.000000
[Sun Jun  3 08:55:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  3 08:55:05 2012] Assessing source extent using major
[Sun Jun  3 08:55:05 2012] Source does appear to be extended
[Sun Jun  3 08:55:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  3 08:55:26 2012] XMMSAS src. selection expression = ellipse(39385.723541, 23337.138763, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun  3 08:55:26 2012] Writing source region out to fullrun_pn_xmm0550960301_pi300-10000_pass1_cl_src29_src.reg
[Sun Jun  3 08:55:26 2012] Extracting stamp from image fullrun_pn_xmm0550960301_pi300-10000_cl_sm2.00.img.gz, (416, 231) - (491, 306)
[Sun Jun  3 08:55:26 2012] XMMSAS bgd. selection expression = annulus(39385.723541, 23337.138763, 1087.500000, 2175.000000, X, Y) && !ellipse(35794.818744, 23972.883600, 1809.127252, 1155.628833, 87.787948, X, Y) && !ellipse(41197.000458, 22452.228119, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35918.859600, 25277.200000, 1702.168049, 233.135207, 103.682996, X, Y) && !ellipse(40988.272675, 23923.632080, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38230.476000, 19248.440000, 2000.640058, 2000.640058, 0.000000, X, Y) && !ellipse(36851.875092, 22680.236725, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37486.100525, 20897.719086, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  3 08:55:26 2012] Writing fullrun_pn_xmm0550960301_pi300-10000_pass1_cl_src29.gif
[Sun Jun  3 09:17:19 2012] Mean detx,y = (-11619.62, -7243.28) 
[Sun Jun  3 09:17:22 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  3 09:17:39 2012] Binned source spectrum to 10 counts/bin
[Sun Jun  3 09:17:39 2012] Setting source spectrum file to fullrun_pn_xmm0550960301_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Sun Jun  3 09:17:39 2012] Setting bgd. spectrum file to fullrun_pn_xmm0550960301_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Sun Jun  3 09:56:01 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun  3 09:56:01 2012] rmf not generated due to insufficient counts
[Sun Jun  3 11:16:58 2012] Updating aperture counts using extracted products
[Sun Jun  3 11:16:58 2012] Error reading totcts from fullrun_pn_xmm0550960301_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Sun Jun  3 11:16:59 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun  3 11:16:59 2012] Using photon index=1.80, rate=0.00469, arf fullrun_pn_xmm0550960301_pi300-10000_pass1_cl_src29.arf
[Sun Jun  3 11:16:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  3 11:16:59 2012] Updating source flux to 3e-14
[Sun Jun  3 11:18:12 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting