[Sun Jun  3 03:29:37 2012] Detection parameters:
  Position = (353.8, 215.9) = 11 31 29.39 31 9 43.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2240.7 +/- 54.5
  Background counts = 24.4
  Rate = 0.2 +/- 0.005

[Sun Jun  3 03:29:38 2012] Off-axis axis estimate = 7.20'
[Sun Jun  3 03:31:57 2012] Using EEF radius (= 10.03 ")to estimate initial spatial extent for simple fitting
[Sun Jun  3 03:31:57 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun  3 03:31:57 2012] Initial guess for spatial extent in simple fitting = 10.03"
[Sun Jun  3 03:31:57 2012] source mask rpix=2.3, npix_max = 31, mask sum = 32, frac = 1.016
[Sun Jun  3 03:31:57 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.03"
[Sun Jun  3 05:16:18 2012] fullrun_pn_xmm0550960301_pi300-10000_cl_pass0_src1.ximg exists
[Sun Jun  3 05:16:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550960301_pi300-10000_cl_pass0_src1.csv
[Sun Jun  3 05:16:18 2012] fullrun_pn_xmm0550960301_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Jun  3 05:16:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550960301_pi300-10000_cl_pass0_src1.csv
[Sun Jun  3 05:16:18 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550960301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550960301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 05:16:19 2012] fullrun_pn_xmm0550960301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Jun  3 05:16:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550960301_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Jun  3 05:16:19 2012] fullrun_pn_xmm0550960301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Jun  3 05:16:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550960301_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Jun  3 05:16:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550960301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550960301_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 06:19:14 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 14.419075 pixels away
[Sun Jun  3 06:19:14 2012] Vigneting correction estimate = 1.000000
[Sun Jun  3 06:19:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  3 06:19:14 2012] Assessing source extent using major
[Sun Jun  3 06:19:14 2012] Source does appear to be extended
[Sun Jun  3 06:19:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  3 06:19:35 2012] Using EEF radius (= 10.03 ")to estimate initial spatial extent for simple fitting
[Sun Jun  3 06:19:35 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun  3 06:19:35 2012] Initial guess for spatial extent in simple fitting = 10.03"
[Sun Jun  3 06:19:35 2012] source mask rpix=2.3, npix_max = 31, mask sum = 32, frac = 1.016
[Sun Jun  3 06:19:35 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 10.03"
[Sun Jun  3 07:54:37 2012] fullrun_pn_xmm0550960301_pi300-10000_cl_pass1_src1.ximg exists
[Sun Jun  3 07:54:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550960301_pi300-10000_cl_pass1_src1.csv
[Sun Jun  3 07:54:37 2012] fullrun_pn_xmm0550960301_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Jun  3 07:54:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550960301_pi300-10000_cl_pass1_src1.csv
[Sun Jun  3 07:54:37 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550960301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550960301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 07:54:38 2012] fullrun_pn_xmm0550960301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Jun  3 07:54:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550960301_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun Jun  3 07:54:38 2012] fullrun_pn_xmm0550960301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jun  3 07:54:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550960301_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun Jun  3 07:54:38 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550960301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550960301_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 08:55:05 2012] Spatial fit model total counts = 2678.380000, observed total counts = 2321.000000
[Sun Jun  3 08:55:05 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun  3 08:55:05 2012] Vigneting correction estimate = 1.000000
[Sun Jun  3 08:55:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  3 08:55:05 2012] Assessing source extent using major
[Sun Jun  3 08:55:05 2012] Source does appear to be extended
[Sun Jun  3 08:55:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  3 08:55:26 2012] Counts = 2240.732178, rescaling region sizes by 2.000000
[Sun Jun  3 08:55:26 2012] XMMSAS src. selection expression = ellipse(30728.270386, 18736.387177, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun Jun  3 08:55:26 2012] Writing source region out to fullrun_pn_xmm0550960301_pi300-10000_pass1_cl_src1_src.reg
[Sun Jun  3 08:55:26 2012] Extracting stamp from image fullrun_pn_xmm0550960301_pi300-10000_cl_sm2.00.img.gz, (279, 141) - (429, 291)
[Sun Jun  3 08:55:26 2012] XMMSAS bgd. selection expression = annulus(30728.270386, 18736.387177, 4350.000000, 8700.000000, X, Y) && !ellipse(35794.818744, 23972.883600, 1809.127252, 1155.628833, 87.787948, X, Y) && !ellipse(32665.464722, 10590.045082, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31387.265000, 22286.787400, 430.837612, 430.837612, 0.000000, X, Y) && !ellipse(28395.947820, 22097.662400, 528.696015, 437.520013, 122.266672, X, Y) && !ellipse(24271.902893, 21027.717285, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22060.667053, 10013.149033, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34065.506805, 26668.348267, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35918.859600, 25277.200000, 1702.168049, 233.135207, 103.682996, X, Y) && !ellipse(25764.600189, 25712.397003, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25742.270400, 23861.577600, 473.456791, 473.456791, 0.000000, X, Y) && !ellipse(39385.723541, 23337.138763, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24939.130341, 21886.668381, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22525.639679, 21632.137360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38230.476000, 19248.440000, 2000.640058, 2000.640058, 0.000000, X, Y) && !ellipse(37588.972290, 19456.700607, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38953.232480, 18234.199200, 2040.400059, 430.024812, 60.995000, X, Y) && !ellipse(39691.492000, 16905.588000, 504.555215, 504.555215, 0.000000, X, Y) && !ellipse(37909.726379, 16571.897110, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39986.086731, 16408.730957, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28086.868200, 25990.604200, 379.774411, 379.774411, 0.000000, X, Y) && !ellipse(26771.399000, 25248.982200, 485.858414, 485.858414, 0.000000, X, Y) && !ellipse(30035.650238, 24902.913086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36851.875092, 22680.236725, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35180.749207, 21789.239426, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37486.100525, 20897.719086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30786.357117, 17413.702026, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21832.576141, 16520.872757, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26096.375305, 16159.338745, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28688.767551, 15084.039125, 440.230418, 375.013872, 115.292801, X, Y) && !ellipse(32068.579620, 14974.774857, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  3 08:55:26 2012] Writing fullrun_pn_xmm0550960301_pi300-10000_pass1_cl_src1.gif
[Sun Jun  3 08:55:41 2012] Mean detx,y = (-1727.79, -7138.25) 
[Sun Jun  3 08:55:45 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  3 08:58:24 2012] Binned source spectrum to 10 counts/bin
[Sun Jun  3 08:58:24 2012] Setting source spectrum file to fullrun_pn_xmm0550960301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jun  3 08:58:24 2012] Setting bgd. spectrum file to fullrun_pn_xmm0550960301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Jun  3 09:36:47 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun  3 09:36:47 2012] rmf not generated due to insufficient counts
[Sun Jun  3 11:16:57 2012] Updating aperture counts using extracted products
[Sun Jun  3 11:16:57 2012] Error reading totcts from fullrun_pn_xmm0550960301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jun  3 11:16:58 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun  3 11:16:58 2012] Using photon index=1.80, rate=0.199, arf fullrun_pn_xmm0550960301_pi300-10000_pass1_cl_src1.arf
[Sun Jun  3 11:16:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  3 11:16:59 2012] Updating source flux to 8.4e-13
[Sun Jun  3 11:18:12 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun  3 11:19:16 2012] xmm0550960301/analysis//spectral/fullrun_pn_xmm0550960301_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete