[Sun Jun  3 03:30:27 2012] Detection parameters:
  Position = (301.0, 186.2) = 11 31 47.27 31 7 32.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 39.1 +/- 9.0
  Background counts = 12.9
  Rate = 0.003 +/- 0.0007

[Sun Jun  3 03:30:27 2012] Off-axis axis estimate = 8.14'
[Sun Jun  3 05:49:37 2012] Using EEF radius (= 10.50 ")to estimate initial spatial extent for simple fitting
[Sun Jun  3 05:49:37 2012] Initial guess for spatial extent in simple fitting = 10.50"
[Sun Jun  3 05:49:37 2012] source mask rpix=2.4, npix_max = 33, mask sum = 29, frac = 0.854
[Sun Jun  3 05:49:37 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 10.50"
[Sun Jun  3 06:19:01 2012] fullrun_mos2_xmm0550960301_pi300-10000_cl_pass0_src17.ximg exists
[Sun Jun  3 06:19:01 2012] fullrun_mos2_xmm0550960301_pi300-10000_cl_pass0_src17_1.ximg exists
[Sun Jun  3 06:19:01 2012] Fit fullrun_mos2_xmm0550960301_pi300-10000_cl_pass0_src17 appears to have run properly
[Sun Jun  3 06:19:02 2012] fullrun_mos2_xmm0550960301_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Sun Jun  3 06:19:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550960301_pi300-10000_cl_pass0_tfrozen_src17.csv
[Sun Jun  3 06:19:02 2012] fullrun_mos2_xmm0550960301_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Sun Jun  3 06:19:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550960301_pi300-10000_cl_pass0_tfrozen_src17.csv
[Sun Jun  3 06:19:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550960301_pi300-10000_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550960301_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 06:19:23 2012] Spatial fit model total counts = 123.776000, observed total counts = 131.000000
[Sun Jun  3 06:19:23 2012] Offset between fit and detection position for source 25 = 1.029961 pixels
[Sun Jun  3 06:19:23 2012] 121.883200 total counts/ 74.433600 bgd. counts: snr = 5.499815
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 1.029961 pixels
  Position = (301.7, 186.9) = 11 31 47.05 31 7 37.1
  Extent = 7.9" x 5.6", rotation angle = 325
  Source counts = 47.4 +/- 11.0
  Background counts = 74.4
  Rate = 0.002 +/- 0.0005
[Sun Jun  3 06:19:23 2012] Vigneting correction estimate = 1.000000
[Sun Jun  3 06:19:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  3 06:19:23 2012] Assessing source extent using major
[Sun Jun  3 06:19:23 2012] Source does appear to be extended
[Sun Jun  3 06:19:23 2012] Computing asymmetry using major and minor axis, asym = 1.42
[Sun Jun  3 08:23:22 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun  3 08:23:22 2012] Initial guess for spatial extent in simple fitting = 6.72"
[Sun Jun  3 08:23:22 2012] source mask rpix=1.5, npix_max = 16, mask sum = 14, frac = 0.838
[Sun Jun  3 08:23:22 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 6.72"
[Sun Jun  3 08:54:54 2012] fullrun_mos2_xmm0550960301_pi300-10000_cl_pass1_src17.ximg exists
[Sun Jun  3 08:54:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550960301_pi300-10000_cl_pass1_src17.csv
[Sun Jun  3 08:54:54 2012] fullrun_mos2_xmm0550960301_pi300-10000_cl_pass1_src17_1.ximg exists
[Sun Jun  3 08:54:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550960301_pi300-10000_cl_pass1_src17.csv
[Sun Jun  3 08:54:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550960301_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550960301_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 08:54:54 2012] fullrun_mos2_xmm0550960301_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Sun Jun  3 08:54:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550960301_pi300-10000_cl_pass1_tfrozen_src17.csv
[Sun Jun  3 08:54:54 2012] fullrun_mos2_xmm0550960301_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Sun Jun  3 08:54:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550960301_pi300-10000_cl_pass1_tfrozen_src17.csv
[Sun Jun  3 08:54:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550960301_pi300-10000_cl_pass1_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550960301_pi300-10000_cl_pass1_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 08:55:14 2012] Warning, spatial fit 17 centroid is now closest to src. 1
[Sun Jun  3 08:55:14 2012] Vigneting correction estimate = 1.000000
[Sun Jun  3 08:55:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  3 08:55:14 2012] Assessing source extent using major
[Sun Jun  3 08:55:14 2012] Source does appear to be extended
[Sun Jun  3 08:55:14 2012] Computing asymmetry using major and minor axis, asym = 1.42
[Sun Jun  3 10:42:51 2012] XMMSAS src. selection expression = ellipse(26195.688600, 16215.342780, 472.276214, 333.751210, 325.074011, X, Y)
[Sun Jun  3 10:42:51 2012] Writing source region out to fullrun_mos2_xmm0550960301_pi300-10000_pass1_cl_src25_src.reg
[Sun Jun  3 10:42:51 2012] Extracting stamp from image fullrun_mos2_xmm0550960301_pi300-10000_cl_sm2.00.img.gz, (275, 160) - (329, 214)
[Sun Jun  3 10:42:51 2012] XMMSAS bgd. selection expression = annulus(26195.688600, 16215.342780, 787.127023, 1574.254045, X, Y)
[Sun Jun  3 10:42:51 2012] Writing fullrun_mos2_xmm0550960301_pi300-10000_pass1_cl_src25.gif
[Sun Jun  3 10:48:46 2012] Mean detx,y = (-3177.83, 7084.96) 
[Sun Jun  3 10:48:48 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  3 10:49:10 2012] Binned source spectrum to 10 counts/bin
[Sun Jun  3 10:49:11 2012] Setting source spectrum file to fullrun_mos2_xmm0550960301_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Sun Jun  3 10:49:11 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0550960301_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Sun Jun  3 11:15:33 2012] Not generating rmf since there are only 47 counts
[Sun Jun  3 11:15:33 2012] rmf not generated due to insufficient counts
[Sun Jun  3 11:17:03 2012] Updating aperture counts using extracted products
[Sun Jun  3 11:17:03 2012] Error reading totcts from fullrun_mos2_xmm0550960301_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Sun Jun  3 11:17:04 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun  3 11:17:04 2012] Using photon index=1.80, rate=0.00204, arf fullrun_mos2_xmm0550960301_pi300-10000_pass1_cl_src25.arf
[Sun Jun  3 11:17:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  3 11:17:04 2012] Updating source flux to 3.9e-14
[Sun Jun  3 11:17:32 2012] Source 25 has fewer than 100.000000 counts, skipping spectral fitting