[Sun Jun  3 03:30:27 2012] Detection parameters:
  Position = (296.3, 275.1) = 11 31 48.85 31 14 0.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 168.1 +/- 16.3
  Background counts = 12.2
  Rate = 0.007 +/- 0.0007

[Sun Jun  3 03:30:27 2012] Off-axis axis estimate = 1.70'
[Sun Jun  3 05:49:37 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Sun Jun  3 05:49:37 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Sun Jun  3 05:49:37 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.059
[Sun Jun  3 05:49:37 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 7.28"
[Sun Jun  3 06:19:01 2012] fullrun_mos2_xmm0550960301_pi300-10000_cl_pass0_src7.ximg exists
[Sun Jun  3 06:19:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550960301_pi300-10000_cl_pass0_src7.csv
[Sun Jun  3 06:19:01 2012] fullrun_mos2_xmm0550960301_pi300-10000_cl_pass0_src7_1.ximg exists
[Sun Jun  3 06:19:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550960301_pi300-10000_cl_pass0_src7.csv
[Sun Jun  3 06:19:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550960301_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550960301_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 06:19:02 2012] fullrun_mos2_xmm0550960301_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Sun Jun  3 06:19:02 2012] fullrun_mos2_xmm0550960301_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Sun Jun  3 06:19:02 2012] Fit fullrun_mos2_xmm0550960301_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Sun Jun  3 06:19:23 2012] Spatial fit model total counts = 244.785000, observed total counts = 231.000000
[Sun Jun  3 06:19:23 2012] Offset between fit and detection position for source 19 = 0.051683 pixels
[Sun Jun  3 06:19:23 2012] 246.654000 total counts/ 146.615000 bgd. counts: snr = 8.261904
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.051683 pixels
  Position = (296.4, 275.1) = 11 31 48.84 31 14 0.7
  Extent = 4.2 (3.5-5.1)", rotation angle = 0
  Source counts = 100.0 +/- 15.7
  Background counts = 146.6
  Rate = 0.004 +/- 0.0007
[Sun Jun  3 06:19:23 2012] Vigneting correction estimate = 1.000000
[Sun Jun  3 06:19:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  3 06:19:23 2012] Assessing source extent using major axis lower bound
[Sun Jun  3 06:19:23 2012] Source does appear to be extended
[Sun Jun  3 06:19:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  3 08:23:22 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun  3 08:23:22 2012] Initial guess for spatial extent in simple fitting = 4.21"
[Sun Jun  3 08:23:22 2012] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.045
[Sun Jun  3 08:23:22 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 4.21"
[Sun Jun  3 08:54:54 2012] fullrun_mos2_xmm0550960301_pi300-10000_cl_pass1_src7.ximg exists
[Sun Jun  3 08:54:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550960301_pi300-10000_cl_pass1_src7.csv
[Sun Jun  3 08:54:54 2012] fullrun_mos2_xmm0550960301_pi300-10000_cl_pass1_src7_1.ximg exists
[Sun Jun  3 08:54:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550960301_pi300-10000_cl_pass1_src7.csv
[Sun Jun  3 08:54:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550960301_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550960301_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 08:54:54 2012] fullrun_mos2_xmm0550960301_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Sun Jun  3 08:54:54 2012] fullrun_mos2_xmm0550960301_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Sun Jun  3 08:54:54 2012] Fit fullrun_mos2_xmm0550960301_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Sun Jun  3 08:55:14 2012] Spatial fit model total counts = 245.048000, observed total counts = 231.000000
[Sun Jun  3 08:55:14 2012] Offset between fit and detection position for source 19 = 0.001342 pixels
[Sun Jun  3 08:55:14 2012] 246.886000 total counts/ 146.805000 bgd. counts: snr = 8.260022
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.001342 pixels
  Position = (296.4, 275.1) = 11 31 48.84 31 14 0.7
  Extent = 4.2 (3.5-5.1)", rotation angle = 0
  Source counts = 100.1 +/- 15.7
  Background counts = 146.8
  Rate = 0.004 +/- 0.0007
[Sun Jun  3 08:55:14 2012] Vigneting correction estimate = 1.000000
[Sun Jun  3 08:55:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  3 08:55:14 2012] Assessing source extent using major axis lower bound
[Sun Jun  3 08:55:14 2012] Source does appear to be extended
[Sun Jun  3 08:55:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  3 10:42:51 2012] XMMSAS src. selection expression = ellipse(25736.412800, 23887.158000, 253.267493, 253.267493, 0.000000, X, Y)
[Sun Jun  3 10:42:51 2012] Writing source region out to fullrun_mos2_xmm0550960301_pi300-10000_pass1_cl_src19_src.reg
[Sun Jun  3 10:42:51 2012] Extracting stamp from image fullrun_mos2_xmm0550960301_pi300-10000_cl_sm2.00.img.gz, (282, 261) - (311, 290)
[Sun Jun  3 10:42:51 2012] XMMSAS bgd. selection expression = annulus(25736.412800, 23887.158000, 422.112488, 844.224977, X, Y) && !ellipse(26760.374440, 23435.721200, 379.350411, 379.350411, 0.000000, X, Y)
[Sun Jun  3 10:42:51 2012] Writing fullrun_mos2_xmm0550960301_pi300-10000_pass1_cl_src19.gif
[Sun Jun  3 10:45:57 2012] Mean detx,y = (73.19, 64.57) 
[Sun Jun  3 10:45:59 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  3 10:46:07 2012] Binned source spectrum to 10 counts/bin
[Sun Jun  3 10:46:08 2012] Setting source spectrum file to fullrun_mos2_xmm0550960301_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Sun Jun  3 10:46:08 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0550960301_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Sun Jun  3 11:17:02 2012] Updating aperture counts using extracted products
[Sun Jun  3 11:17:02 2012] Error reading totcts from fullrun_mos2_xmm0550960301_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Sun Jun  3 11:17:04 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun  3 11:17:04 2012] Using photon index=1.80, rate=0.0043, arf fullrun_mos2_xmm0550960301_pi300-10000_pass1_cl_src19.arf
[Sun Jun  3 11:17:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  3 11:17:04 2012] Updating source flux to 6.4e-14